Prakash Ghose
Prakash Ghose
Assistant Professor
Dr. Prakash Ghose had worked as a project engineer after completion of his BTech from B.P.U.T (KITS Bhubaneswar) for one year in Predominant Engineers and Contractors Pvt. Ltd. in Gurgaon, Hariyana, which is a consultant farm for small scale steel plant. He completed his MTech Degree in B.P.U.T (UCE Burla) in Heat Power Engineering. Where he worked on a project on Numerical study on one-dimensional phase change problem considering convection and radiation at the boundary. Then he joined as faculty in the School of Mechanical Engineering KIIT University in 2008. He completed his PhD. on Numerical simulation of spray combustion considering soot and thermal radiation from Jadavpur University Kolkata. He has published a number of articles in journals and conferences of international repute. He also an author of a book chapter published by an international reputed publisher.
Profile Links
Email :
[email protected]
Scopus Id :
56096134000
Google Scholar :
https://scholar.google.co.in/citations?user=NHkPZw0AAAAJ&hl=en
Social Links
Educational Qualification
Ph. D.
Research Interests
Heat and mass transfer, Combustion
Administrative Responsibility
Hostel superintendent, KP-12, Faculty Incharge of Hydraulic Machine Laboratory
Ph. D.
Research Interests
Heat and mass transfer, Combustion
Administrative Responsibility
Hostel superintendent, KP-12, Faculty Incharge of Hydraulic Machine Laboratory
Journals/Conferences :
1.Ghose, P., Patra, J., Datta, A., & Mukhopadhyay, A. (2014). Effect of air flow distribution on soot formation and radiative heat transfer in a model liquid fuel spray combustor firing kerosene. International Journal of Heat and Mass Transfer, 74, 143-155.
2. Patra, J., Ghose, P., Datta, A., Das, M., Ganguly, R., Sen, S., & Chatterjee, S. (2015). Studies of combustion characteristics of kerosene ethanol blends in an axi-symmetric combustor. Fuel, 144, 205-213.
3. Ghose, P., Patra, J., Datta, A., & Mukhopadhyay, A. (2016). Prediction of soot and thermal radiation in a model gas turbine combustor burning kerosene fuel spray at different swirl levels. Combustion Theory and Modelling, 20(3), 457-485.
4. Ghose, P., Datta, A., & Mukhopadhyay, A. (2016). Modeling Nonequilibrium Combustion Chemistry Using Constrained Equilibrium Flamelet Model for Kerosene Spray Flame. Journal of Thermal Science and Engineering Applications, 8(1).
5. Ghose, P., Datta, A., & Mukhopadhyay, A. (2016). Effect of prediffuser angle on the static pressure recovery in flow through casing-liner annulus of a gas turbine combustor at various swirl levels. Journal of Thermal Science and Engineering Applications, 8(1).
6. Ghose, P., Datta, A., & Mukhopadhyay, A. (2013). Effect of dome shape on static pressure recovery in a dump diffuser at different inlet swirl. Int. J. Emerging Technol. Adv. Eng., 3(3), 465-471.
7. Prakash, G., Ramiz, A. S., Abhilash, N., Ujjwal, T., & Rahul, B. (2016). Modeling of Effervescent Spray with Secondary Atomization within a Furnace. Indian Journal of Science and Technology, 9, 34.
8. Sahu A. K., Ghose, P. (2020) Inlet Swirl and Dump Gap Effect on Static Pressure Recovery in Dump Diffuser-Combustor using Two Equation Turbulence Model. International Journal of Innovative Technology and Exploring Engineering, 9 (5), 1214-1223.
9. Ghose P., Sahu K.B., Sahu A.K. (2020) Computational Modeling on Heat Transfer Enhancement and Fluid Flow Behavior of Al2O3-Water Nanofluid through a Circular Duct. International Journal of Innovative Technology and Exploring Engineering, 9 (5), 1819-1824.
10.Ghose, P., Datta, A., Ganguly, R., Mukhopadhyay, A., & Sen, S. (2018). Modelling of Soot Formation in a Kerosene Spray Flame. In Modeling and Simulation of Turbulent Combustion (pp. 363-394). Springer, Singapore.
Conferences:
1. Kunja Bihari Sahu, Manas Ranjan Padhi, Prakash Ghose, Purna Chandra Mishra, “NATURAL CONVECTION OF AIR IN INCLINED SQUARE ENCLOSURES WITH DIFFERENTIALLY HEATED OPPOSITE WALLS”, 21st National & 10th International ISHMT-ASME Heat and Mass Transfer Conference, 2011, IIT Madras.
2. Kunja Bihari Sahu, Prakash Ghose, Purna Chandra Mishra, “ANALYSIS OF COMBINED CONDUCTION AND RADIATION IN PARTICIPATING MEDIUM WITHIN TWO-DIMENSIONAL RECTANGULAR ENCLOSURES”, 9th International Conference on Mechanical Engineering, 2011 (BUET, Dhaka, Bangladesh).
3. Prakash Ghose, A. Datta, A. Mukhopadhyay, R. Ganguly, S. Sen “ Comparison of Cold flow analysis in a swirled dump combustor with standard k-ε and RNG k-ε turbulent models”, National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, 2012 (KIIT University, Bhubaneswar).
4. Prakash Ghose, P. Nanda , A. Mohanty, K. B. Sahu “NUMERICAL SIMULATION OF ONE DIMENSIONAL PHASE CHANGE PROBLEM WITH VARIABLE PROPERTIES SUBJECTED TO RADIATION AND CONVECTION AT THE BOUNDARY” National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, 2012 (KIIT University, Bhubaneswar).
5. Prakash Ghose, Amitava Datta, Achintya Mukhopadhyay, Effect of pre-diffuser angle on the static pressure recovery in flow through casing-liner annulus of a gas turbine combustor at various swirl levels in 11th international ISHMT-ASME Heat and mass transfer conference, December 28-31, 2013, IIT Kharagpur, India.
6. Prakash Ghose, Amitava Datta, Achintya Mukhopadhyay, Numerical prediction of kerosene spray combustion using different combustion models: a comparison in 11th international ISHMT-ASME Heat and mass transfer conference, December 28-31, 2013, IIT Kharagpur, India
7. Prakash Ghose, Amitava Datta, Achintya Mukhopadhyay, prediction of kerosene spray combustion in a model gas turbine combustor at different inlet swirl and turbulence levels on 2nd KITSAAT International symposium held on 20th & 21st Dec 2013, KIIT University Bhubaneswar.
8. Nalam Yogesh, Prakash Ghose, IshamPanigrahi, FSAE intake air restrictor design on 2nd KITSAAT International symposium held on 20th & 21st Dec 2013, KIIT University Bhubaneswar.
9. P. Ghose, Akhilesh K. Dewangan, Pratik Mitra, A.K.Rout, Experimental study of aerofoil with wind tunnel setup in all India seminar on recent advances in thermal engineering held on 11-12 January 2014 at Institute of Engineers, Bhubaneswar.
1.Ghose, P., Patra, J., Datta, A., & Mukhopadhyay, A. (2014). Effect of air flow distribution on soot formation and radiative heat transfer in a model liquid fuel spray combustor firing kerosene. International Journal of Heat and Mass Transfer, 74, 143-155.
2. Patra, J., Ghose, P., Datta, A., Das, M., Ganguly, R., Sen, S., & Chatterjee, S. (2015). Studies of combustion characteristics of kerosene ethanol blends in an axi-symmetric combustor. Fuel, 144, 205-213.
3. Ghose, P., Patra, J., Datta, A., & Mukhopadhyay, A. (2016). Prediction of soot and thermal radiation in a model gas turbine combustor burning kerosene fuel spray at different swirl levels. Combustion Theory and Modelling, 20(3), 457-485.
4. Ghose, P., Datta, A., & Mukhopadhyay, A. (2016). Modeling Nonequilibrium Combustion Chemistry Using Constrained Equilibrium Flamelet Model for Kerosene Spray Flame. Journal of Thermal Science and Engineering Applications, 8(1).
5. Ghose, P., Datta, A., & Mukhopadhyay, A. (2016). Effect of prediffuser angle on the static pressure recovery in flow through casing-liner annulus of a gas turbine combustor at various swirl levels. Journal of Thermal Science and Engineering Applications, 8(1).
6. Ghose, P., Datta, A., & Mukhopadhyay, A. (2013). Effect of dome shape on static pressure recovery in a dump diffuser at different inlet swirl. Int. J. Emerging Technol. Adv. Eng., 3(3), 465-471.
7. Prakash, G., Ramiz, A. S., Abhilash, N., Ujjwal, T., & Rahul, B. (2016). Modeling of Effervescent Spray with Secondary Atomization within a Furnace. Indian Journal of Science and Technology, 9, 34.
8. Sahu A. K., Ghose, P. (2020) Inlet Swirl and Dump Gap Effect on Static Pressure Recovery in Dump Diffuser-Combustor using Two Equation Turbulence Model. International Journal of Innovative Technology and Exploring Engineering, 9 (5), 1214-1223.
9. Ghose P., Sahu K.B., Sahu A.K. (2020) Computational Modeling on Heat Transfer Enhancement and Fluid Flow Behavior of Al2O3-Water Nanofluid through a Circular Duct. International Journal of Innovative Technology and Exploring Engineering, 9 (5), 1819-1824.
10.Ghose, P., Datta, A., Ganguly, R., Mukhopadhyay, A., & Sen, S. (2018). Modelling of Soot Formation in a Kerosene Spray Flame. In Modeling and Simulation of Turbulent Combustion (pp. 363-394). Springer, Singapore.
Conferences:
1. Kunja Bihari Sahu, Manas Ranjan Padhi, Prakash Ghose, Purna Chandra Mishra, “NATURAL CONVECTION OF AIR IN INCLINED SQUARE ENCLOSURES WITH DIFFERENTIALLY HEATED OPPOSITE WALLS”, 21st National & 10th International ISHMT-ASME Heat and Mass Transfer Conference, 2011, IIT Madras.
2. Kunja Bihari Sahu, Prakash Ghose, Purna Chandra Mishra, “ANALYSIS OF COMBINED CONDUCTION AND RADIATION IN PARTICIPATING MEDIUM WITHIN TWO-DIMENSIONAL RECTANGULAR ENCLOSURES”, 9th International Conference on Mechanical Engineering, 2011 (BUET, Dhaka, Bangladesh).
3. Prakash Ghose, A. Datta, A. Mukhopadhyay, R. Ganguly, S. Sen “ Comparison of Cold flow analysis in a swirled dump combustor with standard k-ε and RNG k-ε turbulent models”, National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, 2012 (KIIT University, Bhubaneswar).
4. Prakash Ghose, P. Nanda , A. Mohanty, K. B. Sahu “NUMERICAL SIMULATION OF ONE DIMENSIONAL PHASE CHANGE PROBLEM WITH VARIABLE PROPERTIES SUBJECTED TO RADIATION AND CONVECTION AT THE BOUNDARY” National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, 2012 (KIIT University, Bhubaneswar).
5. Prakash Ghose, Amitava Datta, Achintya Mukhopadhyay, Effect of pre-diffuser angle on the static pressure recovery in flow through casing-liner annulus of a gas turbine combustor at various swirl levels in 11th international ISHMT-ASME Heat and mass transfer conference, December 28-31, 2013, IIT Kharagpur, India.
6. Prakash Ghose, Amitava Datta, Achintya Mukhopadhyay, Numerical prediction of kerosene spray combustion using different combustion models: a comparison in 11th international ISHMT-ASME Heat and mass transfer conference, December 28-31, 2013, IIT Kharagpur, India
7. Prakash Ghose, Amitava Datta, Achintya Mukhopadhyay, prediction of kerosene spray combustion in a model gas turbine combustor at different inlet swirl and turbulence levels on 2nd KITSAAT International symposium held on 20th & 21st Dec 2013, KIIT University Bhubaneswar.
8. Nalam Yogesh, Prakash Ghose, IshamPanigrahi, FSAE intake air restrictor design on 2nd KITSAAT International symposium held on 20th & 21st Dec 2013, KIIT University Bhubaneswar.
9. P. Ghose, Akhilesh K. Dewangan, Pratik Mitra, A.K.Rout, Experimental study of aerofoil with wind tunnel setup in all India seminar on recent advances in thermal engineering held on 11-12 January 2014 at Institute of Engineers, Bhubaneswar.