Sudesna Roy
Sudesna Roy
Associate Professor
Dr. Sudesna Roy has over 10 years of post PhD experience in research and teaching. During her tenure in KIIT she has taught undergraduate as well and graduate classes in manufacturing processes, materials science, fatigue, fracture and materials engineering. She was the recipient of the DST women scientist award in 2015 and has also received an external grant from DST, SERB in 2017. She has published several papers in reputed journals and presented in many national and international conferences. Here research interest is currently in the area of coatings, i.e thin film deposition, cold spraying and thermal spraying. She has worked extensively in the area of magnetron sputtering, transparent oxide ceramics, optical materials, rare earth oxides, thermal spraying and alloy solidification modeling. She has completely her doctoral degree from Northeastern University, Boston, Massachusetts and post-doctoral experience at Boston University, Boston, Massachusetts, USA for a tenure of 3 yrs. Her educational background comprises of a B.Tech degree in Ceramic Engineering from N.I.T. Rourkela and M.Tech degree in Metallurgy from I.I.T. Kharagpur.
Educational Qualification
PhD
Research Interests
Materials Science; Thin films and coatings; optoelectronics; corrosion
Projects
Administrative Responsibility
Memberships
PhD
Research Interests
Materials Science; Thin films and coatings; optoelectronics; corrosion
Projects
- PI: "Combinatorial synthesis of mixed oxides of lutetium oxide doped with europium thin films for optoelectronics", DST SERB sponsored extra mural funding 2018-2022- completed.
- PI: "High temperature materials processing laboratory" funded by DST under the FIST scheme Science and Technology Human and Institutional Capacity Building - on going.
Administrative Responsibility
- KIIT Knowledge Tree member
- CoE Results Committee member (VC nominee)
Memberships
- IET (UK) member
- IIM (India) life member
- ISC (India) member
- TMS (USA) member
Outreach Activity
Art of Giving
Journals/Conferences :
33 (2018-2023)
1. Rout, P. K., Roy, S., & Rathore, D. (2023). Recent advances in the development of Mg-Ca-Zn alloys as biodegradable orthopedic implants. Materials Today: Proceedings.
2. Baliarsingh, S. S., Das, D., Behera, R. R., Roy, S., Chakrabarty, S., & Mohanta, K. (2023). Mechanical and tribological properties of aluminium based metal matrix composites: An overview. Materials Today: Proceedings.
3. Tripathy, S., Sahoo, D., Roy, S., & Pati, S. (2023). Effect of Substrate Heating on Corrosion Behavior of Nickel Coated on AISI 1020 Steel by Cold Gas Dynamic Spraying. Journal of Materials Engineering and Performance, 32(12), 5346-5352.
4. Patro, S. S., Roy, S., & Sahoo, A. K. (2023). Investigation of influence of design on residual stress at free edge of multilayer Ti/AlN coatings by PVD using FEM. International Journal on Interactive Design and Manufacturing (IJIDeM), 1-12.
5. Mandal, P., Roy, S., & Singh, U. P. (2023). Optimization of RF sputtering parameters for improving the optical and electrical properties of β-gallium oxide thin films. Bulletin of Materials Science, 46(2), 64.
6. Sahoo, B. P., Das, D., Rath, P., Chakrabarty, S., Roy, S., & Mohanta, K. (2023). Improving reinforcement properties of CNTs in aluminium matrix composites: a case of surface modification through AlN nano-particle grafting. Surfaces and Interfaces, 36, 102571.
7. Nayak, B. B., Kundu, S., Sahu, S., Roy, S., & Das, S. S. (2023). Support Vector Regression approach for prediction of delamination at entry and exit during drilling of GFRP Composites. In E3S Web of Conferences (Vol. 391, p. 01162). EDP Sciences.
8. Ashwini, K., Sahu, S., Nayak, B. B., & Roy, S. (2023). Damage detection in structural elements: using adaptive Mamdani model. In E3S Web of Conferences (Vol. 391, p. 01165). EDP Sciences.
9. Pani, R., Behera, R. R., & Roy, S. (2023). Corrosion Behaviour of Metallic Biomaterials in Physiological Environments. In Handbook of Research on Corrosion Sciences and Engineering (pp. 246-273). IGI Global.
10. Roy, S., Nayak, B. B., & Sahu, S. (2022). Investigation on the Microstructure–Corrosion Correlation of Commercially Available AISI 1020 and 304 Steel. In Recent Advances in Materials Processing and Characterization: Select Proceedings of ICMPC 2021 (pp. 175-182). Singapore: Springer Nature Singapore.
11. Mandal, P., Roy, S., & Singh, U. P. (2022). Investigation on the optical and electrical performance of aluminium doped gallium oxide thin films. Optical and Quantum Electronics, 54(8), 476.
12. Rout, P. K., Rathore, D. K., & Roy, S. (2022). Study on Mg-based Biodegradable Orthopaedic Implants and their Corrosion Behaviour: A Review. Advances in Mechanical and Industrial Engineering, 277-287.
13. Roy, S., Brecher, C., Lingertat, H., & Sarin, V. (2022). Investigation on the effects of Ce3+: Lu2SiO5 nanocrystalline phosphors in reducing environment. Optical Materials, 129, 112492.
14. Rout, P. K., Roy, S., Ganguly, S., & Rathore, D. K. (2022). A review on properties of magnesium-based alloys for biomedical applications. Biomedical Physics & Engineering Express, 8(4), 042002.
15. Pani, R., Behera, R. R., & Roy, S. (2022). Electrophoretic deposition of hydroxyapatite Coating: A state of art. Materials Today: Proceedings, 62, 4086-4093.
16. Mandal, P., Usha Kiran, N., Chanda, U. K., Pati, S., & Roy, S. (2021). Corrosion performance of graphene oxide coated 304 SS in PEMFC environment. SN Applied Sciences, 3, 1-9.
17. Mandal, P., Singh, U. P., & Roy, S. (2021, July). A Review on the effects of PVD RF sputtering parameters on rare earth oxide thin films and their applications. In IOP Conference Series: Materials Science and Engineering (Vol. 1166, No. 1, p. 012022). IOP Publishing.
18. Mandal, P., Singh, U. P., & Roy, S. (2021). Optical performance of europium-doped β gallium oxide PVD thin films. Journal of Materials Science: Materials in Electronics, 32, 3958-3965.
19. Nayak, B. B., Sahu, S., & Roy, S. (2021). Damage detection in structural elements: Using optimization of fuzzified rules. Materials Today: Proceedings, 44, 797-800.
20. Roy, S., Baruah, M. S., Sahu, S., & Nayak, B. B. (2021). Computational analysis on the thermal and mechanical properties of thin film solar cells. Materials Today: Proceedings, 44, 1207-1213.
21. Sahu, S., Nayak, B. B., Deka, H., Roy, S., & Jena, H. (2021). Multi-objective optimization of WEDM taper cutting process using MOPSO based on crowding distance. Materials Today: Proceedings, 44, 737-743.
22. Tripathy, S., Behera, A., Pati, S., & Roy, S. (2021). Corrosion resistant nickel coating on mild steel by cold gas dynamic spraying. Materials Today: Proceedings, 46, 4395-4399.
23. Roy, S., & Tripathy, S. (2021). A Review of the Cold Gas Dynamic Spraying Process. Advanced Surface Coating Techniques for Modern Industrial Applications, 135-149.
24. Chanda, U. K., Padhee, S. P., Pandey, A. K., Roy, S., & Pati, S. (2020). Electrodeposited Ni–Mo–Cr–P coatings for AISI 1020 steel bipolar plates. international journal of hydrogen energy, 45(41), 21892-21904.
25. Mandal, P., Singh, U. P., & Roy, S. (2020, June). Co-sputtering of Lu2O3, Eu2O3 and Ga2O3 for optoelectronics applications. In IOP Conference Series: Materials Science and Engineering (Vol. 872, No. 1, p. 012062). IOP Publishing.
26. Chand, S., Chandrasekhar, P., Roy, S., & Singh, S. (2021). Influence of dispersoid content on compressibility, sinterability and mechanical behaviour of B 4 C/BN reinforced Al6061 metal matrix hybrid composites fabricated via mechanical alloying. Metals and Materials International, 27, 4841-4853.
27. Patro, S. S., & Roy, S. (2020). Investigation of effect of residual stress and interlayer in PVD multilayer TiAlN coating by finite element analysis. International Journal of Computational Materials Science and Surface Engineering, 9(3), 198-211.
28. Roy, S., & kumar Mandal, P. (2020). Corrosion Resistance Methods for Stainless Steel: A Review. New Challenges and Industrial Applications for Corrosion Prevention and Control, 208-225.
29. Mandal, P., Kiran, U. N., Pati, S., & Roy, S. (2020). Investigation of the effects of electrophoretic deposition parameters on 304SS steel coated with graphene oxide for PEMFC application. Materials Today: Proceedings, 26, 654-659.
30. Chanda, U. K., Padhee, S. P., Pathak, A. D., Roy, S., & Pati, S. (2019). Effect of Cr content on the corrosion resistance of Ni–Cr–P coatings for PEMFC metallic bipolar plates. Materials for Renewable and Sustainable Energy, 8, 1-11.
31. Das, R. K., Sahoo, A. K., Kumar, R., Roy, S., Mishra, P. C., & Mohanty, T. (2019). MQL assisted cleaner machining using PVD TiAlN coated carbide insert: comparative assessment.
32. Chanda, U. K., Behera, A., Roy, S., & Pati, S. (2018). Evaluation of Ni-Cr-P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell. International Journal of Hydrogen Energy, 43(52), 23430-23440.
33. Mandal, P., kumar Chanda, U., & Roy, S. (2018). A review of corrosion resistance method on stainless steel bipolar plate. Materials Today: Proceedings, 5(9), 17852-17856.
33 (2018-2023)
1. Rout, P. K., Roy, S., & Rathore, D. (2023). Recent advances in the development of Mg-Ca-Zn alloys as biodegradable orthopedic implants. Materials Today: Proceedings.
2. Baliarsingh, S. S., Das, D., Behera, R. R., Roy, S., Chakrabarty, S., & Mohanta, K. (2023). Mechanical and tribological properties of aluminium based metal matrix composites: An overview. Materials Today: Proceedings.
3. Tripathy, S., Sahoo, D., Roy, S., & Pati, S. (2023). Effect of Substrate Heating on Corrosion Behavior of Nickel Coated on AISI 1020 Steel by Cold Gas Dynamic Spraying. Journal of Materials Engineering and Performance, 32(12), 5346-5352.
4. Patro, S. S., Roy, S., & Sahoo, A. K. (2023). Investigation of influence of design on residual stress at free edge of multilayer Ti/AlN coatings by PVD using FEM. International Journal on Interactive Design and Manufacturing (IJIDeM), 1-12.
5. Mandal, P., Roy, S., & Singh, U. P. (2023). Optimization of RF sputtering parameters for improving the optical and electrical properties of β-gallium oxide thin films. Bulletin of Materials Science, 46(2), 64.
6. Sahoo, B. P., Das, D., Rath, P., Chakrabarty, S., Roy, S., & Mohanta, K. (2023). Improving reinforcement properties of CNTs in aluminium matrix composites: a case of surface modification through AlN nano-particle grafting. Surfaces and Interfaces, 36, 102571.
7. Nayak, B. B., Kundu, S., Sahu, S., Roy, S., & Das, S. S. (2023). Support Vector Regression approach for prediction of delamination at entry and exit during drilling of GFRP Composites. In E3S Web of Conferences (Vol. 391, p. 01162). EDP Sciences.
8. Ashwini, K., Sahu, S., Nayak, B. B., & Roy, S. (2023). Damage detection in structural elements: using adaptive Mamdani model. In E3S Web of Conferences (Vol. 391, p. 01165). EDP Sciences.
9. Pani, R., Behera, R. R., & Roy, S. (2023). Corrosion Behaviour of Metallic Biomaterials in Physiological Environments. In Handbook of Research on Corrosion Sciences and Engineering (pp. 246-273). IGI Global.
10. Roy, S., Nayak, B. B., & Sahu, S. (2022). Investigation on the Microstructure–Corrosion Correlation of Commercially Available AISI 1020 and 304 Steel. In Recent Advances in Materials Processing and Characterization: Select Proceedings of ICMPC 2021 (pp. 175-182). Singapore: Springer Nature Singapore.
11. Mandal, P., Roy, S., & Singh, U. P. (2022). Investigation on the optical and electrical performance of aluminium doped gallium oxide thin films. Optical and Quantum Electronics, 54(8), 476.
12. Rout, P. K., Rathore, D. K., & Roy, S. (2022). Study on Mg-based Biodegradable Orthopaedic Implants and their Corrosion Behaviour: A Review. Advances in Mechanical and Industrial Engineering, 277-287.
13. Roy, S., Brecher, C., Lingertat, H., & Sarin, V. (2022). Investigation on the effects of Ce3+: Lu2SiO5 nanocrystalline phosphors in reducing environment. Optical Materials, 129, 112492.
14. Rout, P. K., Roy, S., Ganguly, S., & Rathore, D. K. (2022). A review on properties of magnesium-based alloys for biomedical applications. Biomedical Physics & Engineering Express, 8(4), 042002.
15. Pani, R., Behera, R. R., & Roy, S. (2022). Electrophoretic deposition of hydroxyapatite Coating: A state of art. Materials Today: Proceedings, 62, 4086-4093.
16. Mandal, P., Usha Kiran, N., Chanda, U. K., Pati, S., & Roy, S. (2021). Corrosion performance of graphene oxide coated 304 SS in PEMFC environment. SN Applied Sciences, 3, 1-9.
17. Mandal, P., Singh, U. P., & Roy, S. (2021, July). A Review on the effects of PVD RF sputtering parameters on rare earth oxide thin films and their applications. In IOP Conference Series: Materials Science and Engineering (Vol. 1166, No. 1, p. 012022). IOP Publishing.
18. Mandal, P., Singh, U. P., & Roy, S. (2021). Optical performance of europium-doped β gallium oxide PVD thin films. Journal of Materials Science: Materials in Electronics, 32, 3958-3965.
19. Nayak, B. B., Sahu, S., & Roy, S. (2021). Damage detection in structural elements: Using optimization of fuzzified rules. Materials Today: Proceedings, 44, 797-800.
20. Roy, S., Baruah, M. S., Sahu, S., & Nayak, B. B. (2021). Computational analysis on the thermal and mechanical properties of thin film solar cells. Materials Today: Proceedings, 44, 1207-1213.
21. Sahu, S., Nayak, B. B., Deka, H., Roy, S., & Jena, H. (2021). Multi-objective optimization of WEDM taper cutting process using MOPSO based on crowding distance. Materials Today: Proceedings, 44, 737-743.
22. Tripathy, S., Behera, A., Pati, S., & Roy, S. (2021). Corrosion resistant nickel coating on mild steel by cold gas dynamic spraying. Materials Today: Proceedings, 46, 4395-4399.
23. Roy, S., & Tripathy, S. (2021). A Review of the Cold Gas Dynamic Spraying Process. Advanced Surface Coating Techniques for Modern Industrial Applications, 135-149.
24. Chanda, U. K., Padhee, S. P., Pandey, A. K., Roy, S., & Pati, S. (2020). Electrodeposited Ni–Mo–Cr–P coatings for AISI 1020 steel bipolar plates. international journal of hydrogen energy, 45(41), 21892-21904.
25. Mandal, P., Singh, U. P., & Roy, S. (2020, June). Co-sputtering of Lu2O3, Eu2O3 and Ga2O3 for optoelectronics applications. In IOP Conference Series: Materials Science and Engineering (Vol. 872, No. 1, p. 012062). IOP Publishing.
26. Chand, S., Chandrasekhar, P., Roy, S., & Singh, S. (2021). Influence of dispersoid content on compressibility, sinterability and mechanical behaviour of B 4 C/BN reinforced Al6061 metal matrix hybrid composites fabricated via mechanical alloying. Metals and Materials International, 27, 4841-4853.
27. Patro, S. S., & Roy, S. (2020). Investigation of effect of residual stress and interlayer in PVD multilayer TiAlN coating by finite element analysis. International Journal of Computational Materials Science and Surface Engineering, 9(3), 198-211.
28. Roy, S., & kumar Mandal, P. (2020). Corrosion Resistance Methods for Stainless Steel: A Review. New Challenges and Industrial Applications for Corrosion Prevention and Control, 208-225.
29. Mandal, P., Kiran, U. N., Pati, S., & Roy, S. (2020). Investigation of the effects of electrophoretic deposition parameters on 304SS steel coated with graphene oxide for PEMFC application. Materials Today: Proceedings, 26, 654-659.
30. Chanda, U. K., Padhee, S. P., Pathak, A. D., Roy, S., & Pati, S. (2019). Effect of Cr content on the corrosion resistance of Ni–Cr–P coatings for PEMFC metallic bipolar plates. Materials for Renewable and Sustainable Energy, 8, 1-11.
31. Das, R. K., Sahoo, A. K., Kumar, R., Roy, S., Mishra, P. C., & Mohanty, T. (2019). MQL assisted cleaner machining using PVD TiAlN coated carbide insert: comparative assessment.
32. Chanda, U. K., Behera, A., Roy, S., & Pati, S. (2018). Evaluation of Ni-Cr-P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell. International Journal of Hydrogen Energy, 43(52), 23430-23440.
33. Mandal, P., kumar Chanda, U., & Roy, S. (2018). A review of corrosion resistance method on stainless steel bipolar plate. Materials Today: Proceedings, 5(9), 17852-17856.
Patents
- Pramod Mandal, Sudesna Roy, Udai P. Singh, Aluminium and europium doped -gallium oxide thin films deposition for light emitting diodes (LEDs) by co-sputtering PVD technique, Indian Patent, Application No 202331025175, Status: published.
- Ajay Kumar Behera, Sudesna Roy, Soobhankar Pati, Abinash Mohanty, Ankit Chaudhary, Portable sciatica pain relieving machine, Indian Patent, Application No 202331015366 Status: published.
- Ajay Kumar Behera, Abhishek Mahanta, Amarjeet Yadav, Sudesna Roy, Smart anti theft fuel flow sensor for automobiles, Indian Patent, Application No 202331000589 Status: published.
- Ajay Kumar Behera, Sudesna Roy, Soobhankar Pati, Smart Bookshelf that can slides any books one needs, Indian Patent, Application No 202331004366 Status: published.