Research Groups
Research Labs
Central Research Labs
Publications
Projects
Consultancy
Patents
Statistics

Conference Publications

  1. Das, M., Sahu, S., & Parhi, D. R. (2023). Crack Detection in a Cantilever Composite Beam Using Fuzzy Logic System with Regression Analysis. In Recent Trends in Product Design and Intelligent Manufacturing Systems: Select Proceedings of IPDIMS 2023 (pp. 861-873). Singapore: Springer Nature Singapore.
  2. Mallick, B., & Sahu, P. K. (2023). Exact Solitary Wave Solutions of the (3+ 1)-Dimensional Generalised Kadomtsev–Petviashvili Benjamin–Bona–Mahony Equation. In Advances in Mathematical Modelling, Applied Analysis and Computation: Proceedings of ICMMAAC 2023 (pp. 247-258). Singapore: Springer Nature Singapore.
  3. Acharya, S., Mishra, V. K., Patel, J. K., Gupta, G., Sah, M. K., Shah, P., & Sahu, D. (2023). A Simple Solution of Third Grade Fluid Flow Problem: Cascade-Forward Type ANN Approach. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 85-99). Singapore: Springer Nature Singapore.
  4. Kumar, R., Dikshit, R. K., Das, D., Md. Suaeb Ahemad, S., Sarkar, A., & Samal, C. (2023). Parametric Optimization and Prediction of Material Removal Rate During Turning Al 7075 Alloy with ZrCN-Coated WC Inserts. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 561-570). Singapore: Springer Nature Singapore.
  5. Parida, M. K., Arya, M., & Rout, A. K. (2023). Experimental Analysis on Combustion Characteristics of a DICI Engine Utilizing Argemone Biodiesel with Diesel Blend. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 303-312). Singapore: Springer Nature Singapore.
  6. Panda, S. K., & Rana, B. K. (2023). Numerical Analysis of Gas Entrainment in the Viscous Liquid Pool Developed by a Counter-Rotating Pair of Fully Submerged Rollers. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 3-11). Singapore: Springer Nature Singapore.
  7. Ghose, P., Sahoo, T. K., Ranjan, R., Padhy, M. K., & Sahu, K. B. (2023). Computational Modeling of a Gas-Fired Walking Beam Reheat Furnace for Billet Heating and Scale Formation Prediction. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 129-136). Singapore: Springer Nature Singapore.
  8. Kumar, A., Das, B. N., Panigrahi, S., Chaubdar, P., & Harichandan, A. B. (2023). Low Reynolds Number Flow Past Array of Staggered Cylinders. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 61-72). Singapore: Springer Nature Singapore.
    Panda, S. K., & Rana, B. K. (2023). Formation and Development of Cusp-Induced Air Entrainment Caused by Fully Submerged Rotary Solid Roller: A Numerical Investigation. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 103-112). Singapore: Springer Nature Singapore.
  9. Dutta, S., Boral, A., Das, A., Chaubdar, P., & Harichandan, A. B. (2023). Design Optimization for Heat Transfer Through a Circular Pipe. Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023, 251-261.
  10. Padhi, P. C., & Routara, B. C. (2023). Effect of Recast Layer Thickness of High-Carbon Alloy (EN-31) in Wire EDM Process by Varying Operating Parameters. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 505-517). Singapore: Springer Nature Singapore.
  11. Ghose, P., Sahoo, T. K., Nayak, S. K., Rana, B. K., Patel, J. K., Sarkar, A., & Ukamanal, M. (2023). Computational Modelling for Cyclone Separators Performance Evaluation. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 121-127). Singapore: Springer Nature Singapore.
  12. Acharya, S., Mishra, V. K., & Patel, J. K. (2023). Optimization in Fluid Mixing in Microchannels: A Review. Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023, 73-84.
  13. Srikakulapu, R., Subburaj, V., Kumar, G. C., Krishna, M. D., Dasore, A., & Sinha, G. S. (2023). Design and Validation of Fault Ride Through Controller Design for Grid Connected Large Photovoltaic System. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 389-399). Singapore: Springer Nature Singapore.
  14. Nayak, S., Ghose, P., Sarkar, A., Patel, J. K., Rana, B. K., & Ghose, P. (2023). The Effect of Varying Compression Ratio’s Upon Combustion and Performance Parameters of a TDI Diesel Engine. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 325-337). Singapore: Springer Nature Singapore.
  15. Chand, S., Chandrasekhar, P., Ghose, J., Sarangi, R. K., Kar, S. P., & Swain, A. (2023). Effect of Three-Body Abrasion Wear Behavior on B4C/BN-reinforced Al6061 Alloy Fabricated Through Powder Metallurgy Method. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 493-503). Singapore: Springer Nature Singapore.
  16. Acharya, S., Mishra, V. K., Patel, J. K., Gupta, G., Chaudhuri, S., & Mishra, N. K. (2023). Scaled Conjugate Gradient Algorithm Trained ANN for Parameter Retrieval in Combined Heat Transfer in Porous Ceramic Matrix. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 237-249). Singapore: Springer Nature Singapore.
  17. Sarangi, R. K., Rane, M. V., Kar, S. P., Swain, A., & Sekhar, P. C. (2023). Efficacy of Pulsating Heat Pipe for Laptop Cooling Applications: An Experimental Investigation. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 207-215). Singapore: Springer Nature Singapore.
  18. Boral, A., Dutta, S., Kumar, A., Chaubdar, P., & Harichandan, A. B. (2023). Development of Rayleigh Taylor Instability at Various Atwood Numbers—A Review. Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023, 181-193.
  19. Acharya, S., Mishra, V. K., Patel, J. K., Gupta, G., Sah, M. K., & Shah, P. (2023). Retrieval of Parameter in Combined Mode Conduction–Radiation Problem in Porous Ceramic Matrix by Artificial Neural Network. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 277-288). Singapore: Springer Nature Singapore.
  20. Das, P., Sharma, P. R., Parida, R. K., Pradhan, A., Nanda, A., Chaubdar, P., & Harichandan, A. B. (2023). Design Analysis of a Blended Wing Body. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 169-179). Singapore: Springer Nature Singapore.
  21. Das, D., Dash, S. K., Rauniyar, R. K., Md. Suaeb Ahemad, S., Kumar, R., & Samal, C. (2023). Turning Investigations of Al 7075 Alloy with ZrCN-Coated WC Inserts: Parametric Optimization and Cutting Temperature Prediction. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 531-542). Singapore: Springer Nature Singapore.
  22. Muduli, S. K., Mishra, R. K., & Mishra, P. C. (2023). Computational Study of Combustion Process in a Gas Turbine Engine. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 139-150). Singapore: Springer Nature Singapore.
  23. Rana, B. K., Patel, J. K., Ukamanal, M., Ghose, P., Nayak, S. K., & Sarkar, A. (2023). A Numerical Method to Analyze the Steady Conjugate Heat Transfer Around a Slab Suspended in Air. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 51-59). Singapore: Springer Nature Singapore.
  24. Swain, A., Sarangi, R. K., Kar, S. P., Chandrasekhar, P., & Behera, S. P. (2023). Effect of Water Flow Rate and Temperature on Humidification and Cooling of Air in Air Washer. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 353-360). Singapore: Springer Nature Singapore.
  25. Kumar, A., Das, B. N., Panigrahi, S., Chaubdar, P., & Harichandan, A. B. (2023). Aerodynamic Cooling of Electronic Pin Fins. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 161-168). Singapore: Springer Nature Singapore.
  26. Chaudhuri, S., Mohanty, R. L., Chakraborty, P., & Mishra, V. K. (2023). Flow Characteristics of Electromagnetohydrodynamics of a Third-Grade Fluid Through Large Parallel Plates with Moving Upper Plate. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 227-236). Singapore: Springer Nature Singapore.
  27. Acharya, S., Patel, J. K., Ukamanal, M., Ghose, P., Nayak, S. K., Sarkar, A., … & Mishra, V. K. (2023). A Study on Stability Condition for an Inconsistent Formulation in High-Density Ratio Flow. In Recent Advances in Thermofluids and Manufacturing Engineering: Select Proceedings of ICTMS 2023 (pp. 113-119). Singapore: Springer Nature Singapore.
  28. Roy, S., Nayak, B. B., & Sahu, S. (2023). Investigation on the Microstructure–Corrosion Correlation of Commercially Available AISI 1020 and 304 Steel. In Recent Advances in Materials Processing and Characterization: Select Proceedings of ICMPC 2023 (pp. 175-182). Singapore: Springer Nature Singapore.
  29. Kumar, P., & Panda, S. S. (2023). Joining of PA-6/PA-6 Rods Through ECAP-Based Y-shape Extrusion Channel. In Recent Advances in Mechanical Engineering: Select Proceedings of CAMSE 2023 (pp. 909-917). Singapore: Springer Nature Singapore.
  30. Panda, D. S., Tripathy, S., Choudhury, N., Singhal, D., & Tripathy, S. (2023). Bike-sharing Intention: An Empirical Study in India. In Recent Advances in Mechanical Engineering: Select Proceedings of CAMSE 2023 (pp. 331-339). Singapore: Springer Nature Singapore.
  31. Sarma, D., Chandrasekaran, M., & Sahoo, A. K. (2023). Application of Jaya Algorithm for Minimizing Surface Finish in MQL-Based Green Machining of Titanium Alloy. In Advances in Manufacturing Engineering: Select Proceedings of ICFAMMT 2023 (pp. 3-15). Singapore: Springer Nature Singapore.
  32. Satpathy, D., Singh, S., Mahanty, S., Patra, S., & Panigrahi, I. (2023, July). Design and Analysis of KIIT Nanosatellite’s Micro-Pulsed Plasma Thruster. In Proceedings of the National Aerospace Propulsion Conference: Select Proceedings of NAPC 2023 (pp. 253-272). Singapore: Springer Nature Singapore.
  33. Nayak, S. K., Behera, S. P., Mishra, P. C., & Sarkar, A. (2023). Measurement of Local Spray Impingement Density by Using a Novel Patternator. In Recent Advances in Mechanical Engineering: Select Proceedings of ICRAMERD 2023 (pp. 495-502). Singapore: Springer Nature Singapore.
  34. Behera, S. P., Nanda, B. K., Nayak, S. K., Routara, B. C., & Dhupal, D. (2023). Abrasive Jet Machining of Quartz Plates with Hot Silica Abrasives. In Recent Advances in Mechanical Engineering: Select Proceedings of ICRAMERD 2023 (pp. 605-614). Singapore: Springer Nature Singapore.
  35. Sarkar, A., Borthakur, P., Kumar, A., Adhikari, A., Paul, A., Behera, S. P., & Nayak, S. K. (2023). The Effect of Dedicated Newly Designed Dual-Axis Solar Tracking System and Cooling System on the Performance of a Commercial PV Panel. In Recent Advances in Mechanical Engineering: Select Proceedings of ICRAMERD 2023 (pp. 521-527). Singapore: Springer Nature Singapore.
  36. Behera, R. K., Mohamed, A., Samal, B. P., Panigrahi, I., & Choudhury, S. (2023). Fuzzy Logic Investigations on Wear Analysis of P/M-Produced Aluminum Composite Through Non-lubricated Mode. In Recent Advances in Mechanical Engineering: Select Proceedings of ICRAMERD 2023 (pp. 641-651). Singapore: Springer Nature Singapore.
  1. A Sinha, SP Kar, A SwainAn experimental study on effect of titanium oxide coated heater substrate on pool boiling enhancement, Materials Today: Proceedings, 2022
  2. PP Sahu, A Swain, RK Sarangi, Modelling of desiccant wheels using radial basis neural networks, Materials Today: Proceedings 49, 284-288
  3. S Swain, A Swain, SP Kar, Pool Boiling Heat Transfer Using Isopropyl Alcohol and Ammonium Chloride Surfactant, Proceedings of International Conference on Thermofluids, 343-351
  4. RK Sarangi, A Swain, SP Kar, PC Sekhar, Boiling Front and Boiling Temperature in Microchannels Under Non-uniform Heat Flux DistributionProceedings of International Conference on Thermofluids, 319-327
  5. A Swain, RK Sarangi, SP Kar, PC Sekhar, S Swain, Enhancement of Boiling Heat Transfer Using Surfactant Over Surface with Mini-Channels, Proceedings of International Conference on Thermofluids, 263-273
  6. Rajan, K. M., Sahoo, A. K., Routara, B. C., Panda, A., & Kumar, R. (2022). A review on various approaches of 3D printing of Ti-Alloy. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.04.532
  7. Meher, J., Nayak, B. B., Panda, A., Kumar, R., & Sahoo, A. K. (2022). Recent research development of CNC based milling machining conditions: A comprehensive review. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.04.582
  8. Bag, R., Panda, A., & Sahoo, A. K. (2022). A concise review on environmental sustainable machining conditions of hard part materials. Materials Today: Proceedings.https://doi.org/10.1016/j.matpr.2022.04.433
  9. Khatai, S., Sahoo, A. K., Kumar, R., & Panda, A. (2022). On Machining behaviour of various cutting Inserts: A review on hardened steel. Materials Today: Proceedings.
  10. Akeel, A. M., Kumar, R., Chandrasekhar, P., Panda, A., & Sahoo, A. K. (2022). Hard to cut metal alloys machining: Aspects of cooling strategies, cutting tools and simulations. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.04.053
  11. Khatai, S., Kumar, R., Sahoo, A. K., & Panda, A. (2022). Investigation on tool wear and chip morphology in hard turning of EN 31 steel using AlTiN-PVD coated carbide cutting tool. Materials Today: Proceedings, 59, 1810-1816.
  12. Sahoo, A. K., Panda, A., & Kumar, R. (2022). On Tool Wear Prediction Using Artificial Neural Network and Regression Methodology During Machining. In International conference on smart computing and cyber security: strategic foresight, security challenges and innovation (pp. 315-324). Springer, Singapore.
  13. Dhal, Ajit Kumar, Panda, Amlana, Kumar Ramanuj, Sahoo Ashok Kumar “Temperature Analysis of Nimonic Materials for Turning Process: Current Research Status and a Way Forward.” Advances in Mechanical and Industrial Engineering (2022): 326-331. CRC Press
  14. Bag Rabinarayan, Panda, Amlana, Sahoo, Ashok Kumar , Kumar Ramanuj, Understanding of Temperature Analysis and its Measurement in Turning of Hardened 4340 Steel for Cleaner Sustainable Manufacturing Process: A Status Review, Advances in Mechanical and Industrial Engineering (2022): 270-276. CRC Press
  15. A Sinha, SP Kar, A SwainAn experimental study on effect of titanium oxide coated heater substrate on pool boiling enhancement, Materials Today: Proceedings, 2022
  16. PP Sahu, A Swain, RK Sarangi, Modelling of desiccant wheels using radial basis neural networks, Materials Today: Proceedings 49, 284-288
  17. S Swain, A Swain, SP Kar, Pool Boiling Heat Transfer Using Isopropyl Alcohol and Ammonium Chloride Surfactant, Proceedings of International Conference on Thermofluids, 343-351
  18. RK Sarangi, A Swain, SP Kar, PC Sekhar, Boiling Front and Boiling Temperature in Microchannels Under Non-uniform Heat Flux DistributionProceedings of International Conference on Thermofluids, 319-327
  19. A Swain, RK Sarangi, SP Kar, PC Sekhar, S Swain, Enhancement of Boiling Heat Transfer Using Surfactant Over Surface with Mini-Channels, Proceedings of International Conference on Thermofluids, 263-273
  20. Kashyap, A. K., Parhi, D. R. K., Kumar, S., & Pandey, A. (2022). A GWO Tuned Probabilistic Roadmap Approach for Coarse Mapping of Humanoid Robot in Inclined Terrain. In Applications of Computational Methods in Manufacturing and Product Design (pp. 111-124). Springer, Singapore.
  21. Kashyap, A. K., Pandey, A., Parhi, D. R., & Gour, S. S. (2022). Trajectory tracking of single and multiple humanoid robots in cluttered environment. Materials Today: Proceedings, 56, 650-654.
  22. Pandey, A., Kumar, A., Diwan, T. D., Hasan, M. E., Mohanty, R. L., & Gour, S. S. (2022). New Concept-Based Six-Wheels Rocker-Bogie Robot: Design and analysis. Materials Today: Proceedings, 56, 726-734.
  23. Mishra, K. A., Agarwalla, S., Mishra, D., Samal, A., Kumar, A., Chandrasekhar, P., … & Pandey, A. (2022). Fuzzy logic controlled autonomous quadruped robot. Materials Today: Proceedings, 63, 49-55
  24. Bagchi, T., Mahapatra, A., Yadav, D., Mishra, D., Pandey, A., Chandrasekhar, P., & Kumar, A. (2022). Intelligent security system based on face recognition and IoT. Materials Today: Proceedings, 62, 2133-2137
  25. Saha, P., Kar, A., Behera, R. R., Pandey, A., Chandrasekhar, P., & Kumar, A. (2022). Performance optimization of hybrid renewable energy system for small scale micro-grid. Materials Today: Proceedings, 63, 527-534.
  26. Kashyap, A. K., Pandey, A., Parhi, D. R., & Gour, S. S. (2022). Trajectory tracking of single and multiple humanoid robots in cluttered environment. Materials Today: Proceedings, 56, 650-654.
  27. Pandey, A., Kumar, A., Diwan, T. D., Hasan, M. E., Mohanty, R. L., & Gour, S. S. (2022). New Concept-Based Six-Wheels Rocker-Bogie Robot: Design and analysis. Materials Today: Proceedings, 56, 726-734.
  28. Mishra, K. A., Agarwalla, S., Mishra, D., Samal, A., Kumar, A., Chandrasekhar, P., … & Pandey, A. (2022). Fuzzy logic controlled autonomous quadruped robot. Materials Today: Proceedings, 63, 49-55
  29. Bagchi, T., Mahapatra, A., Yadav, D., Mishra, D., Pandey, A., Chandrasekhar, P., & Kumar, A. (2022). Intelligent security system based on face recognition and IoT. Materials Today: Proceedings, 62, 2133-2137
  30. Saha, P., Kar, A., Behera, R. R., Pandey, A., Chandrasekhar, P., & Kumar, A. (2022). Performance optimization of hybrid renewable energy system for small scale micro-grid. Materials Today: Proceedings, 63, 527-534.
  31. Kanaujia, N., Rahul, Behera, J. K., Kumar Mohapatra, S., Behera, A., Jha, P., Kishore Joshi, K., & Chandra Routara, B. (2022). Process parameters optimization in CNC turning of aluminum 7075 alloy using TOPSIS method coupled with Taguchi philosophy. Materials Today: Proceedings, 56, 989–994. https://doi.org/10.1016/j.matpr.2022.03.226
  32. Rajan, K. M., Sahoo, A. K., Routara, B. C., Panda, A., & Kumar, R. (2022). A review on various approaches of 3D printing of Ti-Alloy. Materials Today: Proceedings, 62, 3865–3868. https://doi.org/10.1016/j.matpr.2022.04.532
  33. Sahu, R. K., Das, R., Routara, B. C., Nayak, B. B., & Sahu, S. (2022). Multi-hole extrusion process: A review. Materials Today: Proceedings, 62, 3522–3527. https://doi.org/10.1016/j.matpr.2022.04.349
  34. Behera, D. D., Das, S. S., Mishra, S. P., Mohanty, R. C., Mohanty, A. M., & Nayak, B. B. (2022). Simulation of solar operated grass cutting machine using PVSYST software. Materials Today: Proceedings, 62, 3044–3050. https://doi.org/10.1016/j.matpr.2022.03.175
  35. Devi, A. G., Sandiri, R., Anuradha, T., Nayak, B. B., Sahu, R. K., & Thenmozhi, M. (2022). Optimization Strategies for High-Speed Electrical Trains Based on Artificial Intelligence for Cost and Energy Reduction. Proceedings of the International Conference on Electronics and Renewable Systems, ICEARS 2022, 1492–1496. https://doi.org/10.1109/ICEARS53579.2022.9752006
  36. Meher, J., Nayak, B. B., Panda, A., Kumar, R., & Sahoo, A. K. (2022). Recent research development of CNC based milling machining conditions: A comprehensive review. Materials Today: Proceedings, 62, 3983–3989. https://doi.org/10.1016/j.matpr.2022.04.582
  37. Nayak, B. B., Kumar, N., Singh, A., Sahu, S., Das, S. S., Behera, D. D., & Sahu, R. K. (2022). Genetic programming approach to predict the performance characteristics of WEDM taper cutting process. Materials Today: Proceedings, 62, 4504–4508.
  38. Sahu, R. K., Das, R., Routara, B. C., Nayak, B. B., & Sahu, S. (2022). Multi-hole extrusion process: A review. Materials Today: Proceedings, 62, 3522–3527. https://doi.org/10.1016/j.matpr.2022.04.349
  39. Sahu, S., Paikaray, S., Sahu, R. K., & Nayak, B. B. (2022). Fault detection in structural elements: Using flexible fuzzy logic model. Materials Today: Proceedings, 62, 4436–4439. https://doi.org/10.1016/j.matpr.2022.04.929
  40. Sankar Das, S., Debadatta Behera, D., & Bijeta Nayak, B. (2022). Use of clean energy for sustainable livelihood in rural areas: A case from South Odisha. Materials Today: Proceedings, 60, 765–772. https://doi.org/10.1016/j.matpr.2022.02.516
  41. Panda, D. S., Tripathy, S., Choudhury, N., Singhal, D., & Tripathy, S. (2023). Bike-sharing Intention: An Empirical Study in India. In Recent Advances in Mechanical Engineering (pp. 331-339). Springer, Singapore.
  42. Ray, K., Tripathy, S., Talukdar, S., Aich, S., & Singhal, D. (2022). Impact of Covid-19 on Aerospace Supply Chain. In Digitalization of Culture Through Technology (pp. 166-171). Routledge.
  43. Nayak, K. K., Aich, S., Singhal, D., & Tripathy, S. (2022). E-Commerce Supply Chain Management in India: Evaluation of Challenges. In Digitalization of Culture Through Technology (pp. 160-165). Routledge.
  44. Nanda, D., Tripathy, S., Rudra, S., Mohapatra, B., Singhal, D., & Aich, S. (2022). A Fuzzy TOPSIS Approach Towards Industrial Safety. In Digitalization of Culture Through Technology (pp. 23-30). Routledge.
  45. Saha, R., Aich, S., Singhal, D., Mahapatra, P., Tripathy, S., & Patnaik, A. (2022). Implementation of Robotics in Safety Management during COVID-19. In Digitalization of Culture Through Technology (pp. 31-39). Routledge.
  46. Rudra, S., Tripathy, S., & Singhal, D. (2022). Consumer Sentiments About Online Shopping in the Indian Scenario During COVID-19: A SWOT, ISM, and AHP Approach. In Empirical Research for Futuristic E-Commerce Systems: Foundations and Applications (pp. 159-180). IGI Global.
  47. Mohapatra, S., Rahul., Sahoo, A. K. (2022). Comparative study of Inconel 601, 625, 718, 825 super-alloys during Electro-Discharge Machining. Materials Today: Proceedings.
  48. Kanaujia, N., Rahul., Behera, J. K., Mohapatra, S. K., Behera, A., Jha, P., Joshi, K. K., & Routara, B. C. (2022). Process parameters optimization in CNC turning of aluminum 7075 alloy using TOPSIS method coupled with Taguchi philosophy. Materials Today: Proceedings, 56, 989-994.
  49. Kanaujia, N., Rahul, Behera, J. K., Kumar Mohapatra, S., Behera, A., Jha, P., Kishore Joshi, K., & Chandra Routara, B. (2022). Process parameters optimization in CNC turning of aluminum 7075 alloy using TOPSIS method coupled with Taguchi philosophy. Materials Today: Proceedings, 56, 989–994. https://doi.org/10.1016/j.matpr.2022.03.226
  50. K. Mohanta, P.K.Sahu, S.Roy, S. Chakraborty, R.R.Behera “ Modeling of three-point bending behaviour for rectangular hollow sections of mild steel and galvanized steel for transport application: A comparative study.” ICFTMME-2022, Aug 19-20 August, (2022), SRM, DELHI-NCR Campus, Ghaziabad(U.P)
  51. Dutta S., Boral A., Das A., Chaubdar P., Harichandan A.B. “Design Optimization for Heat Transfer through a Circular Pipe” International Conference on Thermofluids and Manufacturing Sciences, Jan 24-25, 2022, KIIT University Bhubaneswar, Orissa, India
  52. Das P., Sharma P.R., Parida R.K., Pradhan A., Nanda A., Chaubdar P., Harichandan A.B. “Design Analysis of Blended Wing Body”, International Conference on Thermofluids and Manufacturing Sciences, Jan 24-25, 2022, KIIT University Bhubaneswar, Orissa, India
  53. Kumar A., Das B.N., Panigrahi S., Chaubdar P., Harichandan A.B., “Low Reynolds Number flow past Array of Staggered Cylinders”, International Conference on Thermofluids and Manufacturing Sciences, Jan 24-25, 2022, KIIT University Bhubaneswar, Orissa, India
  54. Kumar A., Das B.N., Panigrahi S., Chaubdar P., Harichandan A.B., “Aerodynamic Cooling of Electronic Pin Fins”, International Conference on Thermofluids and Manufacturing Sciences, Jan 24-25, 2022, KIIT University Bhubaneswar, Orissa, India
  55. Kanaujia, N., Rahul, Behera, J. K., Kumar Mohapatra, S., Behera, A., Jha, P., Kishore Joshi, K., & Chandra Routara, B. (2022). Process parameters optimization in CNC turning of aluminum 7075 alloy using TOPSIS method coupled with Taguchi philosophy. Materials Today: Proceedings, 56, 989–994. https://doi.org/10.1016/j.matpr.2022.03.226
  56. Pani, R., Behera, R. R., & Roy, S. (2022). Electrophoretic deposition of hydroxyapatite Coating: A state of art. Materials Today: Proceedings, 66, 4086-4093
  57. Saha, P., Kar, A., Behera, R. R., Pandey, A., Chandrasekhar, P., & Kumar, A. (2022). Performance optimization of hybrid renewable energy system for small scale micro-grid. Materials Today: Proceedings, 63, 527-534
  58. A Singh, K Kumar, K. G. Sundari, R. Ranjan, B Surekha, Experimental investigations and multi criteria optimization during machining of A356/WC MMCs using EDM, Decision Science Letters, 2022, 11(2), pp. 147–158
  59. Sahu, R. K., Das, R., Routara, B. C., Nayak, B. B., & Sahu, S. (2022). Multi-hole extrusion process: A review. Materials Today: Proceedings.
  60. Nayak, B. B., Kumar, N., Singh, A., Sahu, S., Das, S. S., Behera, D. D., & Sahu, R. K. (2022). Genetic programming approach to predict the performance characteristics of WEDM taper cutting process. Materials Today: Proceedings.
  61. Sahu, S., Paikaray, S., Sahu, R. K., & Nayak, B. B. (2022). Fault detection in structural elements: Using flexible fuzzy logic model. Materials Today: Proceedings.
  62. Sahu, P. P., Swain, A., & Sarangi, R. K. (2022). Modelling of desiccant wheels using radial basis neural networks. Materials Today: Proceedings, 49, 284-288.
  63. RK Sarangi, A Swain, SP Kar, PC Sekhar (2022). Modeling for liquid plug oscillation frequency and amplitude of Pulsating heat pipe. Materials Today: Proceedings 49, 372-377.
  64. Jena, S. M., Sant, S. M., Mishra, R., Nayak, S. K., & Nayak, S. (2022). Design and analysis of flying ua V drone for sanitization purpose. Materials Today: Proceedings.
  65. Mishra, R. (2022). A Comprehensive Review on Involvement of Drones in Covid-19 Pandemics. ECS Transactions, 107(1), 341.
  66. Maity, R., Mishra, R., & Pattnaik, P. K. (2022). A review of flying robot applications in healthcare. Smart Healthcare Analytics: State of the Art, 103-111.
  67. Das, A., Mishra, R., & Kumar, K. (2022). Design of a five-bar linkage for an automated power window. Materials Today: Proceedings, 49, 433-439.
  68. Gopal, M., & Mishra, R. (2022). Static and dynamic analysis of riveted joint considering different materials. Materials Today: Proceedings, 49, 440-445.
  69. Kanaujia, N., Behera, J. K., Mohapatra, S. K., Behera, A., Jha, P., Joshi, K. K., & Routara, B. C. (2022). Process parameters optimization in CNC turning of aluminum 7075 alloy using TOPSIS method coupled with Taguchi philosophy. Materials Today: Proceedings, 56, 989-994.
  70. Mohapatra, S. K., Ranjan, V., & Tripathy, S. (2022). Study of severe plastic deformations of metallic materials:-A move towards Amorphization. Materials Today: Proceedings, 56, 735-741.
  71. Sinha, A.; Prakash Kar, S. & Swain, A. (2022) An experimental study on effect of titanium oxide coated heater substrate on pool boiling enhancement Materials Today: Proceedings, 62, 5948-5955
  72. Kumar Dey, R.; Prakash Kar, S. & Chandrasekhar, P. (2022) Numerical analysis of laser melting of alumina coated steel Materials Today: Proceedings, 62, 6251-6256
  73. Das, P., Kundu, R., Kar, S.P., Sarangi, R.K. (2022) Fabrication of Composite Phase Change Material: A Critical Review Lecture Notes in Mechanical Engineering, pp. 97-106.
  74. Sarkar, A., Sahu, D., Das, D., Behera, S. P., Nayak, S. K., & Mandal, B. K. (2022). PERFORMANCE AND EMISSION STUDY OF ETHANOL-BLENDED GASOLINE POWERED SMALL VCR ENGINE. International Journal of Energy for a Clean Environment, 23(7).
  75. Saroj, S., Nayak, S., & Jesthi, D. K. (2022). Effect of hybridization of carbon/glass/flax/kenaf fibre composite on flexural and impact properties. Materials Today: Proceedings, 49, 502-506.
  76. Jesthi, D. K., Saroj, S., & Nayak, S. (2022). The influence of seawater on mechanical properties of hybrid carbon and glass fiber polymer composites. Materials Today: Proceedings, 49, 507-509.
  77. Jesthi, D. K., Nayak, S., & Saroj, S. (2022). Assessment of flexural and wear properties of carbon/glass fiber hybrid composite. Materials Today: Proceedings, 49, 486-490.
  78. Jesthi, D. K., Nayak, S., Saroj, S., & Sadarang, J. (2022). Evaluation of flexural and vibration property of glass/bamboo/jute hybrid fiber composite in hydrothermal environment. Materials Today: Proceedings, 49, 491-496.
  79. Nayak, S., Jesthi, D. K., Saroj, S., & Sadarang, J. (2022). Assessment of impact and hardness property of natural fiber and glass fiber hybrid polymer composite. Materials Today: Proceedings, 49, 497-501.
  80. Jena, S. M., Sant, S. M., Mishra, R., Nayak, S. K., & Nayak, S. (2022). Design and analysis of flying ua V drone for sanitization purpose. Materials Today: Proceedings.
  81. Guha,S., Das, S., (2022) Structural Morphological and Mechanical Property Analysis of TiAlN Thin Film Coating Deposited by CVD Technique, Lecture Notes in Mechanical Engineering, .
  82. Guha, S., Sharma, B., Das, S., (2022) Parametric Optimisation and Experimental Investigation on the Turning Process by Grey-fuzzy Logic Approach during Machining on EN-31 Alloy Steel, Advances in Mechanical and Industrial Engineering, 1st Edition, Chapter 41,.
  83. Ankit Kumar, Biranchi Narayana Das, Srikant Panigrahi, Pooja Chaubdar, Atal Bihari Harichandan, “Low Reynolds Number flow past Array of Staggered Cylinders”, International Conference on Thermofluids and Manufacturing Sciences, Jan 24-25, 2022, KIIT University Bhubaneswar, Orissa, India
  84. Ankit Kumar, Biranchi Narayana Das, Srikant Panigrahi, Pooja Chaubdar, Atal Bihari Harichandan, “Aerodynamic Cooling of Electronic Pin Fins”, International Conference on Thermofluids and Manufacturing Sciences, Jan 24-25, 2022, KIIT University Bhubaneswar, Orissa, India
  85. Chauhan, H., Satapathy, S., Sahoo, A. K., & Mishra, D. (2022). Identification and priortization of risk factors affecting the Mental health of farmers CIEMA
  86. Pani, R., Ranjan Behera, R., Roy, S., Electrophoretic deposition of hydroxyapatite Coating: A state of art, Materials Today: Proceedings, 2022, 62, pp. 4086–4093
  87. Mohapatra, S. K., Ranjan, V., & Tripathy, S. (2022). Study of severe plastic deformations of metallic materials:- A move towards Amorphization. Materials Today: Proceedings, 56, 735–741. doi: 10.1016/j.matpr.2022.02.244
  88. Panda, D. S., Tripathy, S., Choudhury, N., Singhal, D., & Tripathy, S. (2023). Bike-sharing Intention: An Empirical Study in India. In Recent Advances in Mechanical Engineering (pp. 331-339). Springer, Singapore.
  89. Ray, K., Tripathy, S., Talukdar, S., Aich, S., & Singhal, D. (2022). Impact of Covid-19 on Aerospace Supply Chain. In Digitalization of Culture Through Technology (pp. 166-171). Routledge.
  90. Nayak, K. K., Aich, S., Singhal, D., & Tripathy, S. (2022). E-Commerce Supply Chain Management in India: Evaluation of Challenges. In Digitalization of Culture Through Technology (pp. 160-165). Routledge.
  91. Saha, R., Aich, S., Singhal, D., Mahapatra, P., Tripathy, S., & Patnaik, A. (2022). Implementation of Robotics in Safety Management during COVID-19. In Digitalization of Culture Through Technology (pp. 31-39). Routledge.
  92. Nanda, D., Tripathy, S., Rudra, S., Mohapatra, B., Singhal, D., & Aich, S. (2022). A Fuzzy TOPSIS Approach Towards Industrial Safety. In Digitalization of Culture Through Technology (pp. 23-30). Routledge.
  93. Singhdeo, A. K., Dewangan, A. K., & Tripathy, S. (2022). Cold Chain Management for Vaccine (COVID-19) Immunization Program Using AI & IoT. In Advances in Mechanical and Industrial Engineering (pp. 332-338). CRC Press.
  1. S R Parimanik, T R Mahapatra, D Mishra & Akshaya Kumar Rout, “Optimization of Performance Characteristic in Laser Welding of Nitinol wires using Taguchi and Grey Relation Analysis ,” accepted to publish in the proceedings of the 2nd  International Conferences on Industrial and Manufacturing systems (CIMS-2021), will be held in the Department of Production & Industrial Engineering, Punjab Engineering College, Chandigarh  during 11-13th Nov. 2021.
  2. Pandey, A., Guha, A., Kumar, A., Bej, N., & Parhi, D. R. (2021). Navigation Method for Pioneer P3-DX Ground Wheeled Robot in V-REP Platform Using Type-2 Fuzzy Neural Network (T2FNN) Architecture. In Advances in Mechanical Processing and Design (pp. 571-580). Springer, Singapore.
  3. Mishra, R. R., Panda, A., Sahoo, A. K., & Kumar, R. (2021). Research progress on nano-metal matrix composite (NMMC) fabrication method: A comprehensive review. Materials Today: Proceedings.
  4. Dhal, A. K., Panda, A., Kumar, R., & Sahoo, A. K. (2021). Different machining environments impact analysis for Ti-6Al-4V alloy (Grade 5) turning process: A scoping review. Materials Today: Proceedings, 44, 2342-2347.
  5. Gouda, D., Panda, A., Nanda, B. K., Kumar, R., Sahoo, A. K., & Routara, B. C. (2021). Recently evaluated Electrical Discharge Machining (EDM) process performances: A research perspective. Materials Today: Proceedings, 44, 2087-2092.
  6. Sharma, S. K., Panda, A., Kumar, R., Sahoo, A. K., & Routara, B. C. (2021). Embedded Heat Pipe-Assisted Cooling in Machining Process: A Comprehensive Review. In Proceedings of International Conference on Thermofluids (pp. 665-676). Springer, Singapore.
  7. Kumar, R., Panda, A., Sahoo, A. K., & Singhal, D. (2021). Analysis of Heat Transfer Coefficient in Turning Process. In Proceedings of International Conference on Thermofluids (pp. 655-663). Springer, Singapore.
  8. Rout, A. K., Hotta, S. K., Sahoo, N., Kalita, P., & Kulkarni, V. (2021). Coaxial Thermal Probe for High-Frequency Periodic Response in an IC Engine Test Rig. In Proceedings of the 7th International Conference on Advances in Energy Research (pp. 805-813). Springer, Singapore.
  9. Rout, A. K., Sahoo, N., & Kalita, P. (2021). Coaxial Thermal Probe as a Heat Flux Sensor: An Analytical, Numerical, and Experimental Approach. In Advances in Mechanical Processing and Design (pp. 57-65). Springer, Singapore.
  10. Hotta, S. K., Rout, A. K., & Sahoo, N. (2021). Effect of Compression Ratio on Thermal Efficiency and Cycle-by-Cycle Variation of a Biogas-Fueled SI Engine. In Proceedings of International Conference on Thermofluids (pp. 515-523). Springer, Singapore.
  11. Pandey, A., Guha, A., Kumar, A., Bej, N., & Parhi, D. R. (2021). Navigation Method for Pioneer P3-DX Ground Wheeled Robot in V-REP Platform Using Type-2 Fuzzy Neural Network (T2FNN) Architecture. In Advances in Mechanical Processing and Design (pp. 571-580). Springer, Singapore.
  12. Bej, N., Chaubdar, P., Pandey, A., & Sinhamahapatra, K. P. (2021). Three-Dimensional Investigation on Energy Separation in a Ranque–Hilsch Vortex Tube. In Proceedings of the 7th International Conference on Advances in Energy Research (pp. 655-663). Springer, Singapore.
  13. Kashyap, A. K., Parhi, D. R., Kumar, S., Pandey, A., Muni, M. K., & Ranjan Dhal, P. (2021). Safe Navigation of Humanoid Robot in Cluttered Terrain Using Ant Lion Optimizer Tuned RA Approach. In Current Advances in Mechanical Engineering (pp. 997-1006). Springer, Singapore.
  14. Kashyap, A. K., Pandey, A., Parhi, D. R., & Sharma, A. (2021). Path optimization for multiple humanoid robot using TLBO based ANFIS controller in obscure environment. Materials Today: Proceedings, 47, 2677-2684.
  15. Singh, S., Kashyap, A. K., Pandey, A., Panwar, V. S., & Sharma, N. (2021, May). Sunflower optimization algorithm based steering angle controlled motion planning of two-wheeled Pioneer P3-DX robot in V-REP scenario. In AIP Conference Proceedings (Vol. 2341, No. 1, p. 020003). AIP Publishing LLC.
  16. Modi, V. A., Kumar, P., Malik, R., Yadav, A. S., & Pandey, A. (2021). Analysis of optimized turning parameters of Hastelloy C-276 using PVD coated carbide inserts in CNC lathe under dry condition. Materials Today: Proceedings, 47, 2929-2948.
  17. Pandey, A., Guha, A., Kumar, A., Bej, N., & Parhi, D. R. (2021). Navigation Method for Pioneer P3-DX Ground Wheeled Robot in V-REP Platform Using Type-2 Fuzzy Neural Network (T2FNN) Architecture. In Advances in Mechanical Processing and Design (pp. 571-580). Springer, Singapore.
  18. Behera, A., Behera, B., Sahoo, D. K., Pattnaik, A., Barik, K. N., Mallick, P., Bhuyan, S., Mishra, S. C., & Behera, A. (2021). Effect of Cold Work on Microstructure and Corrosion Properties of 304L Stainless Steel. Lecture Notes in Mechanical Engineering, 433–439. https://doi.org/10.1007/978-981-15-7779-6_37
  19. Das, S., Prasad Satpathy, M., Chandra Routara, B., & Kumar Sahoo, S. (2021). A study on thermo-mechanical analysis of ultrasonically welded dissimilar alloys for automotive application. Materials Today: Proceedings, 44, 2934–2938. https://doi.org/10.1016/j.matpr.2021.01.926
  20. Das, S., Satpathy, M. P., Routara, B. C., & Sahoo, S. K. (2021). Analysis of Tensile and Microstructural Properties of Al–Ni Joints by Ultrasonic Spot Welding. Springer Proceedings in Materials, 9, 277–284. https://doi.org/10.1007/978-981-16-0182-8_21
  21. Sharma, S. K., Panda, A., Kumar, R., Sahoo, A. K., & Routara, B. C. (2021). Embedded Heat Pipe-Assisted Cooling in Machining Process: A Comprehensive Review. Lecture Notes in Mechanical Engineering, 29, 665–676. https://doi.org/10.1007/978-981-15-7831-1_62
  22. Sahoo, P. C., Senapati, J. R., & Rana, B. K. (2021). Droplet impact and spreading around the thin solid vertical cylinder: A numerical approach. In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc..
  23. Panda, S. K., Rana, B. K., & Kumar, P. (2021). Understanding of gas-liquid interfacial dynamics caused by horizontal rotary roller: A numerical approach. In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc..
  24. Panda, S. K., Rana, B. K., & Kumar, P. (2021). Film flow and air entrainment around partially submerged rotating roller with a steady flow of air: A numerical approach. In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc..
  25. Rana, B. K., & Senapati, J. R. (2021). Laminar Mixed Convection Over a Rotating Vertical Hollow Cylinder Exposed in the Air Medium. In Proceedings of International Conference on Thermofluids (pp. 375-385). Springer, Singapore.
  26. Bijeta Nayak, B., Sahu, S., & Roy, S. (2021). Damage detection in structural elements: Using optimization of fuzzified rules. Materials Today: Proceedings, 44, 797–800. https://doi.org/10.1016/j.matpr.2020.10.710
  27. Nayak, B. B., Kundu, S., Kumar, M., Kumar, V., Kumar, R., & Shivam, K. P. (2021). Parametric optimization in drilling of GFRP composites using desirability function integrated simulated annealing approach. Materials Today: Proceedings, 44, 1983–1987. https://doi.org/10.1016/j.matpr.2020.12.116
  28. Roy, S., Baruah, M. S., Sahu, S., & Nayak, B. B. (2021). Computational analysis on the thermal and mechanical properties of thin film solar cells. Materials Today: Proceedings, 44, 1207–1213. https://doi.org/10.1016/j.matpr.2020.11.241
  29. Sahu, S., Nayak, B. B., Deka, H., Roy, S., & Jena, H. (2021). Multi-objective optimization of WEDM taper cutting process using MOPSO based on crowding distance. Materials Today: Proceedings, 44, 737–743. https://doi.org/10.1016/j.matpr.2020.10.636
  30. Kumar, R., Panda, A., Sahoo, A. K., & Singhal, D. (2021). Analysis of Heat Transfer Coefficient in Turning Process. In Proceedings of International Conference on Thermofluids (pp. 655-663). Springer, Singapore.
  31. Rahul., Biswas, S. (2021). The outcome of dielectric fluids in electrical discharge machining performance: A review. Materials Today: Proceedings.
  32. Sinha, G S., Kaushik, L., Muthukumar, P. (2021) A Review on Materials used for Combustion in Porous Radiant Burners, Springer Nature
  33. Sinha, G S., Kaushik, L., Muthukumar, P. (2021) Thermal and emissions Performance of Conventional Pressure Kerosene Cook- stoves with Different Commercial Burners, Springer Nature
  34. Panigrahi, S., Maity, P S., Sinha, G S., Dangi, D., Harichandan, A B H. (2021). Modified Method of Characteristics for Analysing Cold Flow in Bell-Type Rocket Nozzle Springer Nature
  35. Ankit, K., Chaubdar,P., Sinha, G S., Harichandan, A B H. (2021). Performance Analysis of NACA4412 Airfoil with Gurney Flap, Springer Nature
  36. Acharya, S., Mishra, V. K., & Patel, J. K. (2021, May). Enhancing the mixing process of two miscible fluids: A review. In AIP Conference Proceedings (Vol. 2341, No. 1, p. 030025). AIP Publishing LLC.
  37. Acharya, S., Mishra, V. K., & Patel, J. K. (2021, May). Generation of temperature profile by cascade-forward type artificial neural network in flow of Non-Newtonian third grade fluid through two parallel plates with viscous dissipation. In AIP conference Proceedings (Vol. 2341, No. 1, p. 030026). AIP Publishing LLC.
  38. Mishra, V. K., Chaudhuri, S., Patel, J. K., & Sengupta, A. (2021). Estimation of Parameter in Non-Newtonian Third-Grade Fluid Problem by Artificial Neural Network Under Noisy Data. In Proceedings of International Conference on Thermofluids (pp. 235-244). Springer, Singapore.
  39. Mishra, V. K., Chaudhuri, S., Patel, J. K., & Sengupta, A. (2021). Generation of Temperature Profile by Artificial Neural Network in Flow of Non-Newtonian Third Grade Fluid Through Two Parallel Plates. In Proceedings of International Conference on Thermofluids (pp. 39-50). Springer, Singapore.
  40. Patel, J. K., & Natarajan, G. Miscible Fluids Interaction in Microchannels in Presence of the Obstacles.
  41. Zaidi, M., Joshi, K. K., Shukla, A., & Cherinet, B. (2021). A review of the various modelling schemes of unidirectional functionally graded material structures. AIP Conference Proceedings, 2341. https://doi.org/10.1063/5.0050306
  42. V. Pandey, A. Gupta, M.K.Yadav,K.Mohanta, S.K.Panda, V.Kumar” Fabrication and Characterization of porous SiO2 composite for high temperature engineering applications using low-cost materials,” International Virtual Conference on Advances in Ceramic & Cement Technologies: Materails & Manufacturing, Dec 13-14(2021), Kalaburagi, Karnataka.
  43. Gupta, V. Pandey, M.K Yadav, K.Mohanta, S.K.Panda, V.Kumar” A Comparative study on physio-mechanical properties of silica compacts fabricated using rice husk ash derived amorphous and crystalline silica.” International Viryual Conferance on Advances in Ceramic & Cement Technologies: Materials & Manufacturing, Dec 13-14 (2021), Kalaburagi, Karnataka
  44. P. Ghose, T. K. Sahoo, R. Ranjan, K. B. Sahu, Effect of ignition temperature at air-inlet and radiation on temporal soot growth of turbulent diffusion flame, 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, 2021, IIT Madras, Chennai, India.
  45. Mohanty M, Pramanik S K, Pradhan P. Analysis of dynamic stability of a tapered two layer elastic beam resting on a variable Pasternak foundation subjected to axial pulsating load(2021). Materials Today proceedings, Volume 46, Part 10, 2021, Pages 4464-4469
  46. Mohanty M, Behera S, Pradhan M, Dash P. R. (2021).Study of dynamic stability of exponentially tapered asymmetric sandwich beam on Pasternak foundation. Materials Today Proceedings, Volume 44, Part 1, 2021, Pages 1800-1805
  47. Singh, S., Kashyap, A. K., Pandey, A., Panwar, V. S., & Sharma, N. (2021). Sunflower optimization algorithm based steering angle controlled motion planning of two-wheeled Pioneer P3-DX robot in V-REP scenario. AIP Conference Proceedings, 2341. doi: 10.1063/5.0049960
  48. Ghose, P., Sahoo, T. K., Ranjan, R., & Sahu, K. B. (2021). Effect of ignition temperature at air-inlet and radiation on temporal soot growth of turbulent diffusion flame. In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc..
  49. Ghose P., Ranjan R. (2021) Computational Modeling to Investigate the Heat Transfer Enhancement by Using Ethyl Glycol–Water–MWCNT Nanofluid Through Corrugated Pipe. In: Pant P., Mishra S.K., Mishra P.C. (eds) Advances in Mechanical Processing and Design. Lecture Notes in Mechanical Engineering. Springer, Singapore.
  50. Ghose P., Datta A. (2021) Effect of Inlet Swirl and Turbulence Levels on Combustion Performance in a Model Kerosene Spray Gas Turbine Combustor. In: Revankar S., Sen S., Sahu D. (eds) Proceedings of International Conference on Thermofluids. Lecture Notes in Mechanical Engineering. Springer, Singapore
  51. Ghose P., Ranjan R. (2021) Effect of Ground Clearance and Air Temperature on Drag and Lift for NACA 2412 Airfoil. In: Revankar S., Sen S., Sahu D. (eds) Proceedings of International Conference on Thermofluids. Lecture Notes in Mechanical Engineering. Springer, Singapore
  52. Zegeye, D. B., Sinha, D. K., Venkatesh, C., Kumar, A., & Jha, P. (2021). Mathematical modeling and mechanical characterization through process parameters optimization of AlMg-matrix SiCpreinforced composites produced by powder metallurgy route. Materials Today: Proceedings, 47, 3811–3818. https://doi.org/10.1016/j.matpr.2021.03.078
  53. Ghose, P., Sahoo, T. K., Ranjan, R., & Sahu, K. B. (2021), Effect of ignition temperature at air-inlet and radiation on temporal soot growth of turbulent diffusion flame, In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc..
  54. Ghose P., Ranjan R. (2021) Computational Modeling to Investigate the Heat Transfer Enhancement by Using Ethyl Glycol–Water–MWCNT Nanofluid Through Corrugated Pipe. In: Pant P., Mishra S.K., Mishra P.C. (eds) Advances in Mechanical Processing and Design. Lecture Notes in Mechanical Engineering. Springer, Singapore.
  55. Sahu, P. P., Swain, A., & Sarangi, R. K. (2021). Role of PCM in solar photovoltaic cooling: An overview. In Proceedings of International Conference on Thermofluids (pp. 245-259). Springer, Singapore.
  56. Sarangi, R. K., Swain, A., Kar, S. P., & Sekhar, P. C. (2021). Boiling Front and Boiling Temperature in Microchannels Under Non-uniform Heat Flux Distribution. In Proceedings of International Conference on Thermofluids (pp. 319-327). Springer, Singapore.
  57. Chandrasekhar, P., Chand, S., Sarangi, R. K., Kar, S. P., & Swain, A. (2021). Thermal Analysis of Al 7075-T651 During High-Speed Machining. In Proceedings of International Conference on Thermofluids (pp. 643-653). Springer, Singapore.
  58. Swain, A., Sarangi, R. K., Kar, S. P., Sekhar, P. C., & Swain, S. (2021). Enhancement of Boiling Heat Transfer Using Surfactant Over Surface with Mini-Channels. In Proceedings of International Conference on Thermofluids (pp. 263-273). Springer, Singapore.
  59. A Swain, S Swain, SP Kar, RK Sarangi, P Chandrasekhar (2021). Effect of surface characterization on the application of pool boiling heat transfer augmentation. Materials Today: Proceedings 38, 469-473
  60. Mishra, R., Dutta, S., Okade, M., & Mahapatra, K. (2021, August). Substitution Permutation Network based Lightweight Ciphers with Improved Substitution Layers for Secure IoT Applications. In 2021 2nd International Conference on Range Technology (ICORT) (pp. 1-6). IEEE.
  61. Maity, R., Mishra, R., & Pattnaik, P. K. (2021). Flying robot path planning techniques and its trends. Materials Today: Proceedings.
  62. Reddy, M. D. G., Mishra, R., & Mohapatra, M. (2021). Finite Element Analysis and Design of a Four-Helical Coiled Single Lumen Microcatheter. In Intelligent Manufacturing and Energy Sustainability (pp. 649-657). Springer, Singapore.
  63. Singh, A., Mishra, R., Sarkar, A., Singh, A. K., & Toppo, D. (2021). Design and Analysis of Agri-rover for Farming. In Current Advances in Mechanical Engineering (pp. 657-663). Springer, Singapore.
  64. Mishra, R. (2021). Mechanisms of flexible four-bar linkages: A brief review. Materials Today: Proceedings, 47, 5570-5574.
  65. Dey, S., Mishra, R., & Mohapatra, M. (2021). A brief review on technological evolution of vascular microcatheter design. Materials Today: Proceedings, 44, 1564-1574.
  66. Mishra, R., & Bhowmik, D. (2021). A brief description designing, modelling, and materials of cam-follower mechanism. Materials Today: Proceedings, 44, 434-436.
  67. Reddy, M. D. G., Mishra, R., & Dey, S. (2021). Finite element analysis of a single coil straight distal tip microcatheter. Materials Today: Proceedings, 41, 191-196.
  68. Hotta S.K., Rout A.K., Sahoo N. (2021) Effect of Compression Ratio on Thermal Efficiency and Cycle-by-Cycle Variation of a Biogas-Fueled SI Engine. In: Revankar S., Sen S., Sahu D. (eds) Proceedings of International Conference on Thermofluids. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-7831-1_48
  69. Mishra V.K., Pal C., Chaudhuri S., Hotta S.K. (2021) Input Data Management for Parameter Retrieval by Artificial Neural Network in Third-Grade Fluid Flow Problem. In: Kumar N., Tibor S., Sindhwani R., Lee J., Srivastava P. (eds) Advances in Interdisciplinary Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-9956-9_78
  70. Rout, A.K., Hotta, S.K., Sahoo, N., Kalita, P., Kulkarni, V. (2021). Coaxial Thermal Probe for High-Frequency Periodic Response in an IC Engine Test Rig. In: Bose, M., Modi, A. (eds) Proceedings of the 7th International Conference on Advances in Energy Research. Springer Proceedings in Energy. Springer, Singapore. https://doi.org/10.1007/978-981-15-5955-6_76
  71. Sarangi, R.K., Swain, A., Kar, S.P., Sekhar, P.C. (2021) Modeling for liquid plug oscillation frequency and amplitude of Pulsating heat pipe Materials Today: Proceedings, 49, pp. 372-377.
  72. Swain, S., Swain, A., Kar, S.P.(2021) Pool Boiling Heat Transfer Using Isopropyl Alcohol and Ammonium Chloride Surfactant Lecture Notes in Mechanical Engineering, 29, pp. 343-351.
  73. Chandrasekhar, P., Chand, S., Sarangi, R.K., Kar, S.P., Swain, A. (2021) Thermal Analysis of Al 7075-T651 During High-Speed Machining Lecture Notes in Mechanical Engineering, 29, pp. 643-653.
  74. Das, S., Kar, S.P. (2021) Numerical Analysis of Laser-Assisted Cryopreservation of Biological Tissues  Lecture Notes in Mechanical Engineering, 29, pp. 435-444.
  75. Sarangi, R.K., Swain, A., Kar, S.P., Sekhar, P.C. (2021) Boiling Front and Boiling Temperature in Microchannels Under Non-uniform Heat Flux Distribution Lecture Notes in Mechanical Engineering, 29, pp. 319-327.
  76. Swain, A., Sarangi, R.K., Kar, S.P., Sekhar, P.C., Swain, S.(2021) Enhancement of Boiling Heat Transfer Using Surfactant Over Surface with Mini-Channels Lecture Notes in Mechanical Engineering, 29, pp. 263-273.
  77. Sukumar, S., Kar, S.P.(2021)  Enhancement of cooling rate using biodegradable mgo nanoparticles during a cryopreservation process Lecture Notes in Mechanical Engineering, pp. 23-32.
  78. Swain, S.; Swain, A. & Kar, S. P. (2021) Pool Boiling Heat Transfer Using Isopropyl Alcohol and Ammonium Chloride Surfactant Proceedings of International Conference on Thermofluids, Springer Singapore, 343-351
  79. Nayak, S., Sadarang, J., Maurya, M., & Panigrahi, I. (2021). Detection of Breathing Crack Using Vibration Signal Analysis. In Advances in Mechanical Processing and Design (pp. 599-606). Springer, Singapore.
  80. Bijeta Nayak, B., Sahu, S., Roy, S., Damage detection in structural elements: Using optimization of fuzzified rules, Materials Today: Proceedings, 2021, 44, pp. 797–800
  81. Sahu, S., Nayak, B.B., Deka, H., Roy, S., Jena, H., Multi-objective optimization of WEDM taper cutting process using MOPSO based on crowding distance, Materials Today: Proceedings, 2021, 44, pp. 737–743
  82. Roy, S., Baruah, M.S., Sahu, S., Nayak, B.B., Computational analysis on the thermal and mechanical properties of thin film solar cells, Materials Today: Proceedings, 2021, 44, pp. 1207–1213
  83. Singh, D.P., Rathore, S.K., Caudhuri,S. (2021). Study of non-Newtonian fluid flow, heat trasnfer and entropy generation characteristics in trapezoidal channels.Proceedings of the conference on Advances in Thermal-Fluid Engineering ( ATFE-2021).Pandit Dindyal University, GandhiNagar,India,
  84. Mohapatra, B., Kuruvilla, A., Dash, A., & Tripathy, S. (2021). A Framework of Lean–Six Sigma: An Evolutionary Approach. In Advances in Mechanical Processing and Design (pp. 641-647). Springer, Singapore.
  85. Patnaik, A., Tripathy, S., & Dash, A. (2021). Identifying the features influencing sustainable products: A study on green cosmetics. In Advances in mechanical processing and design (pp. 631-640). Springer, Singapore.
  86. Pothal, L. K., Tripathy, S., Kumar, K., & Dash, A. (2021). Study of customer relationship management in automobile industry. In Advances in Mechanical Processing and Design (pp. 649-660). Springer, Singapore.
  87. Mohapatra, P., Tripathy, S., Dash, A., & Biswal, A. (2021). Supplier relationship management is a key to supply chain management. In Advances in Mechanical Processing and Design (pp. 661-670). Springer, Singapore.
  88. Aritra Mondal, Arnab Sengupta, Udrek Dasgupta, and Vijay Kumar Mishra , “Estimation of flame temperature of porous radiant burner using artificial neural network”, AIP Conference Proceedings 2341, 030028 (2021) https://doi.org/10.1063/5.0050300
  89. Swagatika Acharyamailto:[email protected], Vijay Kumar Mishramailto:[email protected], and Jitendra Kumar Patelmailto:[email protected] , “Enhancing the mixing process of two miscible fluids: A review”, AIP Conference Proceedings 2341, 030025 (2021) https://doi.org/10.1063/5.0051818
  90. Arnab Sengupta, Ritwik Mukherjee, and Vijay Kumar Mishra , “Performance and emission characteristic of burners: A review”, AIP Conference Proceedings 2341, 030027 (2021) https://doi.org/10.1063/5.0051735
  91. Vijay K. Mishra, Sushmit Patra, Gaurav Gupta, and Sumanta Chaudhuri , “Generation of temperature profile by cascade-forward type artificial neural network in Non-Newtonian fluid flow problem under noisy data”, AIP Conference Proceedings 2341, 030029 (2021) https://doi.org/10.1063/5.0050954
  92. Swagatika Acharya, Vijay Kumar Mishra, and Jitendra Kumar Patel , “Generation of temperature profile by cascade-forward type artificial neural network in flow of Non-Newtonian third grade fluid through two parallel plates with viscous dissipation”, AIP Conference Proceedings 2341, 030026 (2021) https://doi.org/10.1063/5.0051820
  93. Sugeet Kharbanda, Tanish Bhadury, Gaurav Gupta, Devasri Fuloria, Pravat Ranjan Pati, Vijay Kumar Mishra, Abhishek Sharma, Polymer composites for thermal applications – A review, Materials Today: Proceedings, Volume 47, Part 11, 2021, Pages 2839-2845,
  1. Mallick, R., Kumar, R., Panda, A., & Sahoo, A. K. (2020). Performance characteristics of hardened AISI D2 steel turning: a review. Materials Today: Proceedings, 26, 2685-2690.
  2. Mishra, R. R., Kumar, R., Panda, A., Pandey, A., & Sahoo, A. K. (2020). Particle Swarm Optimization of Multi-responses in Hard Turning of D2 Steel. Progress in Computing, Analytics and Networking, 237-244.
  3. Panda, A., Sahoo, A. K., Kumar, R., & Das, D. (2020). A concise review of uncertainty analysis in metal machining. Materials Today: Proceedings, 26, 1734-1739.
  4. Bag, R., Panda, A., Sahoo, A. K., & Kumar, R. (2020). Cutting tools characteristics and coating depositions for hard part turning of AISI 4340 martensitic steel: A review study. Materials Today: Proceedings, 26, 2073-2078.
  5. Pandey, A., Bej, N., Kumar, R., Panda, A., & Parhi, D. R. (2020). Type-2 fuzzy controller (T2FC) based motion planning of differential-drive pioneer P3-DX wheeled robot in V-REP software platform. In A Journey Towards Bio-inspired Techniques in Software Engineering (pp. 47-57). Springer, Cham.
  6. Kar, B. C., Panda, A., Kumar, R., Sahoo, A. K., & Mishra, R. R. (2020). Research trends in high speed milling of metal alloys: a short review. Materials Today: Proceedings, 26, 2657-2662.
  7. Bag, R., Panda, A., Sahoo, A. K., & Kumar, R. (2020). A brief study on effects of nano cutting fluids in hard turning of AISI 4340 steel. Materials Today: Proceedings, 26, 3094-3099.
  8. Das, D., Pradhan, S. K., Sahoo, A. K., Panda, A., Satpathy, M. P., & Samal, C. (2020). Tool wear and cutting force investigations during turning 15 wt% SiCp-Al 7075 metal matrix composite. Materials Today: Proceedings, 26, 854-859.
  9. Mishra, R. R., Bag, R., Panda, A., Kumar, R., & Sahoo, A. K. (2020). Effectiveness of multi position, electrostatic and nanofluid based minimum quantity lubrication: a brief review. Materials Today: Proceedings, 26, 1099-1102.
  10. Mishra, R. R., Sahoo, A. K., Panda, A., Kumar, R., Das, D., & Routara, B. C. (2020). MQL machining of high strength steel: a case study on surface quality characteristic. Materials Today: Proceedings, 26, 2616-2618.
  11. Rout, A. K., Sahoo, N., & Kalita, P. (2020). Characterization of High-Frequency Thermal Sensor for Transient Temperature Measurement. In Advances in Materials and Manufacturing Engineering (pp. 99-106). Springer, Singapore.
  12. Kashyap, A. K., & Pandey, A. (2020). Optimized path planning for three-wheeled autonomous robot using teaching–learning-based optimization technique. In Advances in materials and manufacturing engineering (pp. 49-57). Springer, Singapore.
  13. Rajwade, S., Tiwari, A. K., & Pandey, A. (2020). Type-1 Fuzzy Pulse Width Modulation Controlled Motion Planning of Differential Drive 4-Wheeled Power Robot. In Advances in Mechanical Engineering (pp. 1487-1496). Springer, Singapore.
  14. Lagaza, K. P., Kashyap, A. K., & Pandey, A. (2020). Spider monkey optimization algorithm based collision-free navigation and path optimization for a mobile robot in the static environment. In Advances in mechanical engineering (pp. 1459-1473). Springer, Singapore.
  15. Bej, N., Pandey, A., Kashyap, A. K., & Parhi, D. R. (2020). Optimum navigation of four-wheeled ground robot in stationary and non-stationary environments using wind-driven optimization algorithm. In Innovative product design and intelligent manufacturing systems (pp. 931-941). Springer, Singapore.
  16. Mishra, R. R., Kumar, R., Panda, A., Pandey, A., & Sahoo, A. K. (2020). Particle Swarm Optimization of Multi-responses in Hard Turning of D2 Steel. Progress in Computing, Analytics and Networking, 237-244.
  17. Behera, A., & Sahoo, A. K. (2020). Wear behaviour of Ni based superalloy: A review. Materials Today: Proceedings, 33, 5638–5642. https://doi.org/10.1016/j.matpr.2020.04.007
  18. Behera, B., Mallick, P., Patel, S. K., Behera, A., Sahoo, D., & Behera, A. (2020). Splat analysis of plasma sprayed (Al + Ni + h(BN)) homogenized mixture for improvement of abradable resistance on aero-engine inner casing surface. Materials Today: Proceedings, 33, 5698–5702. https://doi.org/10.1016/j.matpr.2020.03.836
  19. Behera, A., Sahu, P., Mohapatra, S. K., & Ghadei, S. K. (2020). Characterization of carbon based nanofibers in nanocomposites and their applications. Materials Today: Proceedings, 33(xxxx), 5714–5719. https://doi.org/10.1016/j.matpr.2020.04.531
  20. Behera, A. (2020). Optimization of process parameters in laser welding of dis-similar materials. Materials Today: Proceedings, 33, 5765–5769. https://doi.org/10.1016/j.matpr.2020.07.148
  21. Das, S., Karthik, V., Pabi, S. K., Behera, A., Patel, S. K., Swain, B., Roshan, R., & Behera, A. (2020). Enhancement of thermal conductivity of Cu-Cr dispersed nanofluids according to multiscale modeling. Materials Today: Proceedings, 33, 5514–5520. https://doi.org/10.1016/j.matpr.2020.03.330
  22. Chaubdar, P., Harichandan, A. B., Vashishtha, A., & Jagadeesh, G. (2020). Experimental and numerical studies of torpidal ballute in hypersonic shock tunnel. 6th National Symposium on Shock Waves, IIT Madras.
  23. Kumar, A. , & Harichandan, A. B. (2020). Generation of shock waves on an airfoil in Mars atmosphere. 6th National Symposium on Shock Waves, IIT Madras.
  24. Das, D., Pradhan, S. K., Nayak, R. K., Nanda, B. K., & Routara, B. C. (2020). Influence of curing time on properties of CFRP composites: A case study. Materials Today: Proceedings, 26, 344–349. https://doi.org/10.1016/j.matpr.2019.12.028
  25. Mishra, R. R., Sahoo, A. K., Panda, A., Kumar, R., Das, D., & Routara, B. C. (2020). MQL machining of high strength steel: A case study on surface quality characteristic. Materials Today: Proceedings, 26, 2616–2618. https://doi.org/10.1016/j.matpr.2020.02.552
  26. Nanda, B. K., Das, D., Mishra, S. B., Satpathy, M. P., Routara, B. C., & Dhupal, D. (2020). Machining of borosilicate glass using Normal-Pressurized-Bed and Fluidized-bed AJM set ups. Materials Today: Proceedings, 26, 2412–2418. https://doi.org/10.1016/j.matpr.2020.02.515
  27. Pati, P. R., Das, S., Satpathy, M. P., Routara, B. C., Sahoo, S. K., & Bhuyan, S. K. (2020). Ultrasonic spot welding of Al-Cu sheets: A comprehensive study. Materials Today: Proceedings, 33, 5168–5173. https://doi.org/10.1016/j.matpr.2020.02.873
  28. Pati, P. R., Satpathy, M. P., Nanda, B. K., Routara, B. C., & Pattanaik, A. (2020). Dissimilar joining of Al/SS sheets with interlayers by ultrasonic spot Welding: Microstructure and mechanical properties. Materials Today: Proceedings, 26, 1757–1760. https://doi.org/10.1016/j.matpr.2020.02.369
  29. Routara, B. C., Das, D., Satpathy, M. P., Nanda, B. K., Sahoo, A. K., & Singh, S. S. (2020). Investigation on machining characteristics of T6-Al7075 during EDM with Cu tool in steady and rotary mode. Materials Today: Proceedings, 26, 2143–2150. https://doi.org/10.1016/j.matpr.2020.02.462
  30. Jena, B. P., Jagdev, A., Nayak, B. B., & Satapathy, S. (2020). A study on acoustic property of composites from waste tyres. Materials Science Forum, 978 MSF, 229–236. https://doi.org/10.4028/www.scientific.net/MSF.978.229
  31. Nayak, B. B., Sahu, S., & Das, D. (2020). Investigation on machining performance of boron carbide reinforced aluminium matrix composite during WEDM taper cutting process. Materials Today: Proceedings, 26, 932–936. https://doi.org/10.1016/j.matpr.2020.01.147
  32. Pradhan, M., Satapathy, S., & Nayak, B. B. (2020). Selection of material for dental implant. AIP Conference Proceedings, 2273. https://doi.org/10.1063/5.0024386
  33. Bijeta Nayak, B., Jena, H., Dey, D., Kassaye Oda, B., Chetia, A., Kumar Brahma, S., Bordoloi, T., & Chakraborty, D. (2020). Materials selection and design analysis of cryogenic pressure vessel: A review. Materials Today: Proceedings, 47, 6605–6608. https://doi.org/10.1016/j.matpr.2021.05.095
  34. Singh, A. K., Singhal, D., & Kumar, R. (2020). Machining of aluminum 7075 alloy using EDM process: An ANN validation. Materials Today: Proceedings, 26, 2839-2844.
  35. Das D*, Pradhan SK, Nayak RK, Nanda BK, Routara BC, Influence of curing time on properties of CFRP composites: A case study, Materials Today: Proceedings 26 (2020) 344–349. First online published on 24-12-2019. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.12.028
  36. Das D*, Pradhan SK, Sahoo AK, Panda A, Satpathy MP, Samal C, Tool wear and cutting force investigations during turning 15 wt.% SiCp-Al 7075 metal matrix composite, Materials Today: Proceedings 26 (2020) 854–859. First online published on 23-1-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.01.053
  37. Singh K, Das D*, Nayak RK, Khandai S, Kumar R, Routara BC, Effect of silanizion on mechanical and tribological properties of kenaf-carbon and kenaf-glass hybrid polymer composites, Materials Today: Proceedings 26 (2020) 2094–2098. First online published on 8-3-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.452
  38. Panda A*, Sahoo AK, Kumar R, Das D, A concise review of uncertainty analysis in metal machining, Materials Today: Proceedings 26 (2020) 1734–1739. First online published on 16-3-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.365
  39. Khatai S, Kumar R*, Sahoo AK, Panda A, Das D, Metal-oxide based nanofluids application in turning and grinding processes: a comprehensive review, Materials Today: Proceedings 26 (2020) 1707–1713. First online published on 13-2-2020. Elsevier, DOI: 10.1016/j.matpr.2020.02.360
  40. Tiwari PK, Kumar R*, Sahoo AK, Panda A, Das D, Roy S, Performance Evaluation of Coated Cermet Insert in Hard Turning, Materials Today: Proceedings 26 (2020) 1941–1947. First online published on 8-3-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.424
  41. Nayak BB*, Sahu S, Das D, Investigation on machining performance of boron carbide reinforced aluminium matrix composite during WEDM taper cutting process, Materials Today: Proceedings 26 (2020) 932–936. First online published on 29-1-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.01.147
  42. Pati PR, Satpathy MP*, Mahanta T, Das S, Das D, Experimental Investigations on Interfacial Characterization and Mechanical Performance of Ultrasonic Spot Welded Al/Brass Joints, Materials Today: Proceedings 26 (2020) 1761–1765. First online published on 4-3-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.370
  43. Routara BC*, Das D, Satpathy MP, Nanda BK, Sahoo AK, Singh SS, Investigation on machining characteristics of T6-Al7075 during EDM with Cu tool in steady and rotary mode, Materials Today: Proceedings 26 (2020) 2143–2150. First online published on 7-3-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.462
  44. Nanda BK*, Das D, Mishra SB, Satpathy MP, Routara BC, Dhupal D, Machining of Borosilicate Glass using Normal-Pressurized-Bed and Fluidized- Bed AJM Set Ups, Materials Today: Proceedings 26 (2020) 2412–2418. First online published on 17-3-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.515
  45. Chakrabarty S*, Panda SR, Das D, Pant P, Mishra SK, Effect of Grain Size and specimen thickness on formation of mechanical twin, Materials Today: Proceedings 26 (2020) 1323–1329. First online published on 25-4-2020. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.269
  46. Mishra RR, Sahoo AK*, Panda A, Kumar R, Das D, Routara BC, MQL machining of high strength steel: A case study on surface quality characteristic, Materials Today: Proceedings 26 (2020) 2616–2618. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.02.552
  47. Pradhan RC and Das D*, Electro-discharge machining of metal matrix composites – a Review, Materials Today: Proceedings 24 (2020) 251–260. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2020.04.274
  48. Das D*, Prasad KS, Khatri HV, Mandal RK and Samal C, Cutting Temperature Prediction Model And Parametric Optimization In Turning Aluminium Matrix Composite, AIP Conference Proceedings 2273 (2020) 0500011-0500017. AIP Publishing, DOI: https://doi.org/10.1063/5.0024242
  49. Pradhan RC and Das D*, A Critical Review On Surface Quality And Chip Forms During Turning Aluminium Matrix Composites, AIP Conference Proceedings 2273 (2020) 0500021-0500028, AIP Publishing DOI: https://doi.org/10.1063/5.0024254
  50. Samal C*, Mishra PC and Das D, Design Modifications And Performance Of Biomass Cookstoves-A Review, AIP Conference Proceedings 2273 (2020) 0200021-0200029. AIP Publishing,  DOI: https://doi.org/10.1063/5.0024260
  51. Sahoo BP and Das D*, Strengthening Mechanisms Of Carbon Nanotube Reinforced Aluminium Composites Synthesized Through Liquid State Processing – An Overview, AIP Conference Proceedings 2273 (2020) 0500121-0500127. AIP Publishing, DOI: https://doi.org/10.1063/5.0024256
  52. Raj, S., Rahul., Sinha, H. R., Das, S., Guha, S., Banik, D., & Routara, B. C. (2020). Optimization of surface topography of electro-discharge machined super alloy Inconel 825: using TOPSIS integrated with Taguchi philosophy. Materials Today: Proceedings, 24, 218-224.
  53. Banik, D., Rahul., Sinha, H. R., & Biswal, B. B. (2020). Process Parameters Optimization of EDMed Surface of Titanium-Grade-4 Alloy Using Topsis Coupled with Taguchi Philosophy. In Advances in Mechanical Engineering (pp. 227-234). Springer, Singapore.
  54. Sinha, H. R., Rahul., Banik, D., & Biswal, B. B. (2020). Analytical Study for Enhancing Gear Performance Using Al 2 O 3 Paint Coating. In Advances in Mechanical Engineering (pp. 235-243). Springer, Singapore.
  55. S. Sahoo, S. Hazra, M. De, K. Mohanta, R.N.P. Choudhury, Electrical properties of the PVDF-Lead free ceramics- Based composites Film for sensor applications, GTSCS 2020, 13–14 August (2020), SOA University, Bhubaneswar
  56. Agarwal, S., Dash, B., Saini, P., Sharma, N., Ranjan Mahapatra, T., & Kumar Panda, S. (2020). Vibroacoustic analysis of un-baffled layered composite plate under thermal environment. Materials Today: Proceedings, 24. doi: 10.1016/j.matpr.2020.04.415
  57. Satankar, R. K., Sharma, N., Panda, S. K., & Mohapatra, S. S. (2020). Experimental and simulation study of eigen frequency responses of Luffa cylindrica sponge fibre polymer composite. Materials Today: Proceedings, 33. doi: 10.1016/j.matpr.2020.03.552
  58. Behera, R. K., Sharma, N., & Parida, S. K. (2020). Finite Element Analysis of Buckling, Free Vibration and Flexure of Clamped Laminated Composite Plates in Variable Thermal Environment. In Lecture Notes in Mechanical Engineering. doi: 10.1007/978-981-15-0124-1_102
  59. Chaubdar P., Vashishtha A., G. Jagadeesh, “Experimental and Numerical studies of Toroidal Ballute in Hypersonic Shock Tunnel”, 6th National Symposium on Shock Waves, Feb 26-28, 2020, IIT Madras, Chennai, India (pp.107-108)
  60. Behera, A., Sahu, P., Mohapatra, S.K., Ghadei, S.K., 2020. Characterization of carbon based nanofibers in nanocomposites and their applications. Mater. Today Proc. 33, 5714–5719. https://doi.org/10.1016/j.matpr.2020.04.531
  61. Dansana, B., Ranjan Mahapatra, T., Sahu, P., Kumar Sahu, S., 2020. Tribological and electrochemical corrosion performanceanalysis of Hastelloy C276 under different loading conditions. Mater. Today Proc. 24, 1434–1441. https://doi.org/10.1016/j.matpr.2020.04.462
  62. Sahu, R. K., Das, R., & Routara, B. C. (2020). Studies on die designs in multi-hole extrusion process. Materials Today: Proceedings, 26, 3043-3047.
  63. S Swain, SP Kar, A Swain, RK Sarangi, PC Sekhar. (2020). Numerical prediction of solid-liquid front during laser melting of fused quartz. Materials Today: Proceedings 26, 1864-1867.
  64. Das, A., Mishra, R., & Kumar, K. (2020, December). Design and Modelling of an Automated Power Window Five-Bar Mechanism. In 2020 IEEE International Conference on Advent Trends in Multidisciplinary Research and Innovation (ICATMRI) (pp. 1-4). IEEE.
  65. Dey, S., Mishra, R., Mohapatra, M., & Dubey, A. (2020, November). Design and analysis of single lumen microcatheter. In AIP Conference Proceedings (Vol. 2273, No. 1, p. 050025). AIP Publishing LLC.
  66. Setiawan, R., Kulkarni, V. D., Upadhyay, Y. K., Jain, V., Mishra, R., Yu, S. Y., & Raisal, I. (2020). The Influence Work-Life Policies Can Have on Part-Time Employees in Contrast to Full-Time Workers and The Consequence It Can Have on Their Job Satisfaction, Organizational Commitment and Motivation (Doctoral dissertation, Petra Christian University).
  67. Reddy, M. D. G., & Mishra, R. (2020, May). A comprehensive review on microcatheter used for catheterization procedure. In AIP Conference Proceedings (Vol. 2235, No. 1, p. 020007). AIP Publishing LLC.
  68. Pradhan, S., Priyadarshini, M., & Mohapatra, S. K. (2020). Multi-objective Optimization of Process Parameter During Dry Turning of Grade 5 Titanium Alloy with Carbide Inserts: Hybrid Fuzzy-TOPSIS Approach. In Advances in Intelligent Manufacturing (pp. 51-58). Springer, Singapore.
  69. Behera, A., Sahu, P., Mohapatra, S. K., & Ghadei, S. K. (2020). Characterization of carbon based nanofibers in nanocomposites and their applications. Materials Today: Proceedings, 33, 5714-5719.
  70. Pati, P. R., Satpathy, M. P., Pattanaik, A., Mohapatra, S. K., & Mishra, S. B. (2020). Ultrasonic spot welding of Al/Mg alloys: a state-of-the-art review. Materials Today: Proceedings, 33, 4981-4987.
  71. Mishra, B., Mohapatra, S. K., Ranjan, V., & Maity, K. (2020). Equal channel angular pressing of the aluminium alloy: a numerical investigation. Materials Today: Proceedings, 26, 2173-2178.
  72. Mekonen M.W., Sahoo N., Hotta S.K. (2020) Effect of Preheating and Fuel Injection Pressure on Performance Parameters of Diesel Engine Running with Biodiesel. In: Singh S., Ramadesigan V. (eds) Advances in Energy Research, Vol.2. Springer Proceedings in Energy. Springer, Singapore. https://doi.org/10.1007/978-981-15-2662-6_35
  73. Hotta S.K., Sahoo N., Mohanty K., Mahanta P., Chaudhari A.J. (2020) Effect of Compression Ratio on the Performance and Emission Characteristics of a Raw Biogas Fueled Spark Ignition Engine. In: Singh S., Ramadesigan V. (eds) Advances in Energy Research, Vol. 2. Springer Proceedings in Energy. Springer, Singapore. https://doi.org/10.1007/978-981-15-2662-6_63
  74. Swain, A., Swain, S., Kar, S.P., Sarangi, R.K., Chandrasekhar, P. (2020) Effect of surface characterization on the application of pool boiling heat transfer augmentation Materials Today: Proceedings, 38, pp. 469-473.
  75. Sukumar, S., Kar, S.P.(2020) Thermal modeling of transport phenomena for a pulsed laser melting process Materials Science Forum, 978 MSF, pp. 114-120.
  76. Das, S., Kar, S.P. (2020) Role of Marangoni convection in a repetitive laser melting process Materials Science Forum, 978 MSF, pp. 34-39.
  77. Sukumar, S., Sinha, A., Kar, S.P. (2020) Thermal Model for Temperature Control of Building Subjected to Variable Solar Radiation Lecture Notes in Mechanical Engineering, pp. 785-795.
  78. Chakrabarty, S., Panda, S. R., Das, D. &Pant, P. (2020) ‘Effect of grain size and specimen thickness on formation of mechanical twin’, 10th ICMPC, Mathura. Feb 21-23, 2020, Materials Today: Proceedings.
  79. Panda, S. R., Routra, B. C., Chakrabarty, S. & Kar, A. K. (2020) ‘Influence of Treated Titania Nanoparticle on Mechanical Properties of Dental Nano-Composites: Manufacturing Method and Experimental Results’, ICAMME, 15-17 March, 2020, KIIT Bhubaneswar.
  80. Nayak, S., Panigrahi, I., & Nayak, R. K. (2020). Design and Analysis of Hybrid Composite Leaf Spring for Automotive Applications: An Extensive Study. In Advances in Lightweight Materials and Structures (pp. 127-132). Springer, Singapore.
  81. Chakrabarty, S., Panda, S. R., Das, D., Pant, P., & Mishra, S. K. (2020). Effect of grain size and specimen thickness on formation of mechanical twin. Materials Today: Proceedings, 26, 1323-1329..
  82. Naik, P., Pradhan, S., Sahoo, P., & Acharya, S. K. (2020). Effect of filler loading on mechanical properties of natural carbon black reinforced polymer composites. Materials Today: Proceedings, 26, 1892-1896.
  83. Naik, P., Pradhan, S., Sahoo, P., & Acharya, S. K. (2020). Study of mechanical behaviour of raw and chemical treated bio-filler composites and its effect on moisture absorption. Materials Today: Proceedings, 26, 1936-1940.
  84.  Das, P.P., Gupta, P., Guha, S., Mahto, P.K.,  Das, S.,  Bandyopadhyay, A.,  (2020) A grey-fuzzy approach to optimize the cutting parameters of slab milling operation, AIP Conference Proceedings,  2273, 050066.
  85. Guha, S., Das, P.P., Routara, B.C., (2020)  Parametric optimization of wire electric discharge machining on AISI4140 alloy steel using regression analysis and grey-fuzzy approach, Materials Today: Proceedings. 46, 4734-4740.
  86.  Chauhan, H., Satapathy, S., & Sahoo, A. K. Ergonomic risk assessment of framers in adverse climatic conditions (CIMS-2020), NIT Jalandhar.
  87. Chauhan, H., Satapathy, S., Sahoo, A. K., & Mishra, D. (2020). Mitigation of ergonomic risk factors in agriculture through suitable hand-glove materials. Materials Today: Proceedings, 26, 561-565
  88.  Mukherjee, S., Mishra, D. & Satapathy, S. (2020). Prediction of Hand Grip Strength among Elderly Farmers of Odisha in India. Materials Today: Proceedings, 24, 318- 325.
  89.  Chauhan, H., Satapathy, S., & Sahoo, The Indian Farming Community and Their Health Concerns for a Sustainable Agriculture, (ICAMIE-2020).
  90. Pradhan, M., Satapathy, S., & Nayak, B. B. (2020, November). Selection of material for dental implant. In AIP Conference Proceedings (Vol. 2273, No. 1, p. 050056). AIP Publishing LLC.
  91. Kar, B. C., Satapathy, S., & Biswal, J. N. (2020, November). Achieving by sustainable supply chain management in thermal power plants. In AIP Conference Proceedings (Vol. 2273, No. 1, p. 050048). AIP Publishing LLC.
  92. Jena, B. P., Jagdev, A., Nayak, B. B., & Satapathy, S. (2020). A Study on Acoustic Property of Composites from Waste Tyres. In Materials Science Forum (Vol. 978, pp. 229-236). Trans Tech Publications Ltd.
  93. Mandal, P., Singh, U.P., Roy, S., Co-sputtering of Lu2O3, Eu2O3 and Ga2O3 for optoelectronics applications, IOP Conference Series: Materials Science and Engineering, 2020, 872(1), 012062
  94. Rathore, S.K., Chaudhuri, S. (2020). 2.Numerical investigation of thermo-fluidic transport characteristics of non-Newtonian fluids flowing through wavy channels with a sinusoidal profile”, Proceedings of the International Conference on Innovations in Thermo-Fluid Engineering and Science ( ICITFES 2020), NIT Rourkela, Odisha, India, 2020.
  95. Jaypuria, S., Mahapatra, T. R., Tripathy, S., Nakhale, S., & Gupta, S. K. (2020). Fuzzy C-means clustering-based ANFIS regression modeling of hybrid laser-TIG fabrication. In Advances in Materials and Manufacturing Engineering (pp. 617-624). Springer, Singapore.
  1. M Arya, S Samanta and A K Rout, “Review of performance analysis of green engine fueled with gasoline blended biofuel,” accepted to publish in the proceedings of the International Conferences on Advances in Renowned Renewable Energy Technologies (ICARRET-2019), will be held in the Department of Mechanical Engineering, Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, AP, India, during 23-24th Oct. 2019.
  2. Kumar, A., & Behera, R. K. (2019, November). Passive Constrained Layer Damping: A State of the Art Review. In IOP Conference Series: Materials Science and Engineering (Vol. 653, No. 1, p. 012036). IOP Publishing.
  3. Behera, R. K., Akhtar, S., & Kumar, A. (2019). Prediction of eigen-frequency of stiffened sandwich composite plates using finite elements. Materials Today: Proceedings, 18, 5292-5299.
  4. Panigrahi, R. R., Panda, A., Sahoo, A. K., & Kumar, R. (2019). Machining performance measures of high temperature heat resistant super alloys: a review. Materials Today: Proceedings, 18, 4524-4530.
  5. Rout, A. K., Sahoo, N., Kalita, P., & Kulkarni, V. (2019). Transient Response Characteristics of a Surface Junction Probe. In Gas Turbine India Conference (Vol. 83525, p. V001T03A006). American Society of Mechanical Engineers.
  6. Rout A., Sahoo N.,Kalita P. and Kulkarni V, (2019) “Design and Installation of a Shock tube for Ignition delay Based Studies, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), December 28-31, 2019, IIT Roorkee, Roorkee, India.
  7. Patle, B. K., Patel, B., Pandey, A., Sahu, O., & Parhi, D. R. K. (2019, February). Analysis of Firefly-Fuzzy Hybrid Controller for Wheeled Mobile Robot. In 2019 3rd International Conference on Computing and Communications Technologies (ICCCT) (pp. 187-194). IEEE.
  8. Patle, B. K., Jha, A., Pandey, A., Gudadhe, N., & Kashyap, S. K. (2019). The optimized path for a mobile robot using fuzzy decision function. Materials Today: Proceedings, 18, 3575-3581.
  9. Behera, A., Sahu, P. S., & Patel, S. K. (2019). Application of taguchi methodology for optimization of process parameters in laser bending of Al sheet. Materials Today: Proceedings, 26, 2323–2327. https://doi.org/10.1016/j.matpr.2020.02.500
  10. Baidya, A., Biswas, S., Singh, A., Moitra, D., Chaubdar, P., & Harichandan, A.B. (2019). Effect of temperature on the hydrodynamics of steam reactor in a chemical looping reforming system. 7th International Conference on Advances in Energy Research (ICAER – 2019), IIT Bombay.
  11. Pareek, M., Patel, A., Chaubdar, P., & Harichandan, A. B. (2019). Investigation of hydraulic and heat transfer phenomena in heat sinks using staggered pin fins. 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC – 2019), IIT Roorkee.
  12. Patel, A., Pareek, M., Chaubdar, P., & Harichandan A.B. (2019). Transient bubble dynamics in a chemical looping combustion system with Cu-based oxygen carrier. 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC – 2019), IIT Roorkee.
  13. Das, S., Prasad Satpathy, M., Chandra Routara, B., Kumar Sahoo, S., & Gantayat, S. (2019). Mechanical Behavior of Ultrasonic Spot Welded Aluminum to Cupro-Nickel Sheets for Battery Tabs. In IOP Conference Series: Materials Science and Engineering (Vol. 653). https://doi.org/10.1088/1757-899X/653/1/012031
  14. Guha, S., Das, P. P., & Routara, B. C. (2019). Parametric optimization of wire electric discharge machining on AISI4140 alloy steel using regression analysis and grey-fuzzy approach. Materials Today: Proceedings, 46, 4734–4740. https://doi.org/10.1016/j.matpr.2020.10.305
  15. Mohanty, S., Singh, S. S., Routara, B. C., Nanda, B. K., & Nayak, R. K. (2019). A comparative study on machining of alsicp metal matrix composite using electrical discharge machine with and without nano powder suspension in dielectric. Materials Today: Proceedings, 18, 4281–4289. https://doi.org/10.1016/j.matpr.2019.07.386
  16. Nanda, B. K., Das, D., Nayak, R. K., Mishra, S. B., Routara, B. C., & Dhupal, D. (2019). Fluidised bed hot abrasive jet machining of borosilicate glass with zircon sand. Materials Today: Proceedings, 18, 2993–3000. https://doi.org/10.1016/j.matpr.2019.07.170
  17. Pani, P. R., Nayak, R. K., Routara, B. C., & Sekhar, P. C. (2019). Flexural and specific wear rate of seawater aged bamboo, jute and glass fiber reinforced polymer hybrid composites. Materials Today: Proceedings, 18, 3409–3414. https://doi.org/10.1016/j.matpr.2019.07.268
  18. Sahu, R. K., Das, R., & Routara, B. C. (2019b). Studies on die designs in multi-hole extrusion process. Materials Today: Proceedings, 26, 3043–3047. https://doi.org/10.1016/j.matpr.2020.02.632
  19. Singh, K., Das, D., Nayak, R. K., Khandai, S., Kumar, R., & Routara, B. C. (2019). Effect of silanizion on mechanical and tribological properties of kenaf-carbon and kenaf-glass hybrid polymer composites. Materials Today: Proceedings, 26, 2094–2098. https://doi.org/10.1016/j.matpr.2020.02.452
  20. Sahu, S., & Nayak, B. B. (2019). An adaptive genetic algorithm method for damage detection in structural elements. Materials Today: Proceedings, 26, 581–585. https://doi.org/10.1016/j.matpr.2019.12.162
  21. Pradhan, M., Satapathy, S., & Bijeta Nayak, B. (2019). Prioritizing the barriers of dental implants for patients attending OPD- A MCDM approach. Materials Today: Proceedings, 46, 4563–4567. https://doi.org/10.1016/j.matpr.2020.09.708
  22. Jena, B. P., Nayak, B. B., & Satapathy, S. (2019). Physical & mechanical characterization of composites from waste tire rubber crumb. Materials Today: Proceedings, 26, 1752–1756. https://doi.org/10.1016/j.matpr.2020.02.368
  23. SM Gombi, D Sahu (2019), Exploration of selected room temperature magneto caloric materials using COMSOL multiphysics, IOP Conference Series: Materials Science and Engineering 577 (1), 012160
  24. Das D*, Samal C, Chaubey AK, Nayak RK, Influence of thermal treatment and reinforcement content on properties of aluminium matrix composites: a case study, Materials Today: Proceedings 18:7 (2019) 3262–3267. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.202
  25. Das D*, Sharma M, Samal C, Nayak RK, Investigation of mechanical properties of SiCp reinforced Al 7075 metal matrix composites: a case study, Materials Today: Proceedings 18:7 (2019) 3958–3965. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.337
  26. Das D*, Roy DK, Satpathy MP, Nanda BK, Compressive, impact and flexural behaviour of Al based metal matrix composites, Materials Today: Proceedings 18:7 (2019) 3080–3086. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.180
  27. Saroj S, Sarangi RK*, Das D and Nayak RK, Enhancement of Mechanical and Vibrational Properties of Plywood for Packaging and Container Applications, Materials Today: Proceedings 18:7 (2019) 3952–3957. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.336
  28. Jesthi DK, Nayak RK*, Nanda BK and Das D, Assessment of Abrasive Jet Machining of Carbon and Glass Fiber Reinforced Polymer Hybrid Composites, Materials Today: Proceedings 18:7 (2019) 3116–3121. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.185
  29. Nanda BK* , Das D, Nayak RK, Mishra SB, Routara BC and Dhupal D, Fluidised Bed Hot Abrasive Jet Machining of Borosilicate Glass with Zircon Sand, Materials Today: Proceedings 18:7 (2019) 2993–3000. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.170
  30. Singh K, Nayak RK*, Das D and Sahoo SK, Improvement of Hardness of Short Fork (6082 Alloy)-A Case Study, Materials Today: Proceedings 18:7 (2019) 2515–2519. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.108
  31. Khandai S, Nayak RK*, Kumar A, Das D and Kumar R, Assessment of Mechanical and Tribological Properties of Flax/Kenaf/Glass/Carbon Fiber Reinforced Polymer Composites, Materials Today: Proceedings 18:7 (2019) 3835–3841. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.322
  32. Sahoo BP, Das D*, Critical review on liquid state processing of aluminium based metal matrix nano-composites, Materials Today: Proceedings 19:2 (2019) 493–500. Elsevier , DOI: https://doi.org/10.1016/j.matpr.2019.07.642
  33. Das D*, Dubey OP, Sharma M, Nayak RK, Samal C, Mechanical properties and abrasion behaviour of glass fiber reinforced polymer composites – A case study, Materials Today: Proceedings 19:2 (2019) 506–511. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2019.07.644
  34. Samal C*, Mishra PC, Mukherjee S and Das D, Evolution of high performance and low emission biomass cookstoves-an overview, AIP Conference Proceedings, AIP Conference Proceedings 2200 (2019) 020021-1-020021-7. AIP Publishing, DOI: https://doi.org/10.1063/1.5141191
  35. Banik, D., Rahul.,  Bhattacharjee, S., Debnath, B., Huang, H., & Routara, B. C. (2019, November). Study of the output responses using Utility concept coupled with Taguchi Philosophy during EDM machining of nickel-based superalloy Inconel 718. In IOP Conference Series: Materials Science and Engineering (Vol. 653, No. 1, p. 012023). IOP Publishing.
  36. Debnath, B.,Rahul.,  Banik, D., Huang, H., & Routara, B. C. (2019, November). Study of controlling parameters during electro-discharge machining of titanium alloy using grey relation analysis coupled with Taguchi philosophy. In IOP Conference Series: Materials Science and Engineering (Vol. 653, No. 1, p. 012049). IOP Publishing.
  37. Banik, D., Rahul., Kar, G., Debnath, B., Routara, B. C., Sahoo, A. K., & Kochar, D. (2019). Machining Performance Optimization During Electro Discharge Machining on Titanium (Grade 4): Application of Satisfaction Function and Distance-Based Approach. In Advances in Industrial and Production Engineering (pp. 535-542). Springer, Singapore.
  38. Ali, G., Rahul., Banik, D., Yadav, A., Rautara, B. C., & Sahoo, A. K. (2019). Analysis and Optimization of Surface Integrity Characteristics of EDMed Work Surface Inconel 718 Super-Alloy Using Grey-Based Taguchi Method. In Advances in Industrial and Production Engineering (pp. 441-448). Springer, Singapore.
  39. Sinha, G S.,  Muthukumar, P. (2019). Material Characterization Role in Porous Media Combustion Stability and Performance,Materials Today: Proceedings,vo. 18, Part 7,pp:  5063-5068,ISSN 2214-7853,
  40. Sinha, G S., Muthukumar, P. (2019). Study of effects of various parameter on thermal efficiency of porous burner with kerosene pressure stove, J. Phys.: Conf. Ser. 1240 (012136)
  41. Joshi, K. K., & Kar, V. R. (2019). Bending analysis of Bi-dimensional functionally graded plate using FEA. Materials Today: Proceedings, 26, 1766–1770. https://doi.org/10.1016/j.matpr.2020.02.371
  42. Mohapatra, S. K., Mishra, S. B., Joshi, K. K., & Pradhan, S. (2019). Effect of the hot deformation on mechanical and wear characteristics of the P/M AMC. Materials Today: Proceedings, 18, 5040–5047. https://doi.org/10.1016/j.matpr.2019.07.498
  43. Joshi, K. K., Behera, R. K., Kumar, R., Mohapatra, S. K., & Patro, S. S. (2019). Machinability Assessment of Inconel 800HT and its prediction using a hybrid fuzzy controller in EDM. Materials Today: Proceedings, 18, 5270–5275. https://doi.org/10.1016/j.matpr.2019.07.550
  44. Behera, R. K., Patro, S. S., & Joshi, K. K. (2019). Stability analysis of stiffened FG sandwich plates based on FEA. Materials Today: Proceedings, 18, 3507–3513. https://doi.org/10.1016/j.matpr.2019.07.279
  45. Jyoti, V. Pandey, M.K. Yadav, A. Gupta, Dr. A Kumar,Prof Vinay kumar singh, Dr. K Mohanta, “Effect of binders on microstructure and mechanical properties of green and sintered silica”, National Conference on    “Innovations and Technologies for Ceramics, InTeC-(2019), December 11-12 December 2019, Thiruvananthapuram, Kerala.
  46. Pandey, A. Gupta, A. Kumar, K. Mohanta, S. Basu, “ Synthesis of grapheme oxide and study of compaction behaviour of Al2O3-graphene oxide composite powder”, at 82nd Annual Session of the Indian Ceramic Society, Jamshedpur, January 9-11,(’2019)
  47. Mohanty M, Pradhan M, Dash P R, (2019).Analysis of Dynamic stability of a rotating symmetric sandwich beam subjected to axial pulsating load and thermal gradient. 64th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM 2019), December 9-12, 2019, Contributory Session
  48. Mohanty m, Bhattacharya S, Yadav S, Pradhan M.(2019).Free vibration analysis of a two-layer elastic beam resting on a variable Pasternak foundation. Materials Today Proceedings, Volume 5, Issue 9, Part 3, 2018, Pages 19242-19249.
  49. Bej, N., Chaubdar , P., Pandey, A., Sinhamahapatra, K. P. (2019). Three-Dimensional Investigation on Energy Separation in a Ranque–Hilsch Vortex Tube. 7th International Conference on Advances in Energy Research, IIT Bombay, India.
  50. Bej, N., Chaubdar, P., Sinhamahapatra, K. P. (2019). Numerical study on the effects of conical angle on the performance of a vortex tube. 21st Annual CFD Symposium, NAL, Bangalore, Inida.
  51. Bej, Nilotpala,. Sinhamahapatra, K. P. (2019). Investigation on Ranque–Hilsch Vortex Tube Using Different Turbulence Models. International Conference on Advances in Mechanical Processing and Design, Kalinga Institute of Industrial Technology, Bhubaneswar, India.
  52. Ranjan, S., Khan, R., Dash, S., Sharma, N., Mahapatra, T. R., & Panda, S. K. (2019). Thermo-elastic free vibration analysis of functionally graded flat panel with temperature gradient along thickness. IOP Conference Series: Materials Science and Engineering, 577(1). doi: 10.1088/1757-899X/577/1/012123
  53. Sahu, P., Sharma, N., & Panda, S. K. (2019). Numerical eigen-frequencies of hybrid fiber composite curved shell panels. Materials Today: Proceedings, 26. doi: 10.1016/j.matpr.2020.02.473
  54. Bej N., Chaubdar P., Pandey A., K.P. Sinhamahapatra, “Three-Dimensional Investigation on Energy separation in a Ranque–Hilsch Vortex Tube”, Proceedings of the 7th International Conference on Advances in Energy Research, December 10-12, 2019, IIT Bombay, India. (pp.655-663)
  55. Pareek M., Patel A., Sharma S., Chaubdar P., Harichandan A.B., “Investigation of Hydraulic and Heat Transfer Phenomena in Heat Sinks using Staggered Pin Fins”, 25th National and 3rd International ISHMT – ASTFE Heat and Mass Transfer Conference (IHMTC- 2019), December 28-31, 2019, IIT Roorkee, India
  56. Patel A., Pareek M., SharmaS., Chaubdar P., Harichandan A.B., “Transient Bubble Dynamics in a Chemical Looping Combustion System with Cu-based Oxygen Carrier”, 25th National and 3rd International ISHMT – ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, India
  57. Baidya A., Biswas S., Singh A., Moitra D., Chaubdar P., and HarichandanA. B., “Effect of Temperature on the Hydrodynamics of Steam Reactor in a Chemical Looping Reforming System” 7th International Conference on Advances in Energy Research (ICAER-2019), December 10-12, 2019, IIT Bombay, India
  58. Bej, N., Chaubdar, P., Sinhamahapatra, K. P. (2019). Numerical study on the effects of conical angle on the performance of a vortex tube. 21st Annual CFD Symposium, NAL, Bangalore, Inida.
  59. Sahu, P., Sharma, N., Panda, S.K., 2019. Numerical eigen-frequencies of hybrid fiber composite curved shell panels. Mater. Today Proc. 26, 2168–2172. https://doi.org/10.1016/j.matpr.2020.02.473
  60. Sahu, P., Kumar Parida, S., 2019. Effect of cenosphere filler on the hardness and impact strength of wild cane fibre mat reinforced laminated composites. IOP Conf. Ser. Mater. Sci. Eng. 653. https://doi.org/10.1088/1757-899X/653/1/012044
  61. G. Sundari, R. Ranjan, B Surekha, Performance evaluation of Al7075 hybrid metal matrix composites during non-conventional machining process, International Journal of Scientific and Technology Research, 2019, 8(12), pp. 3871–3877
  62. Sahu, R. K., Das, R., Dash, B., & Routara, B. C. (2019).Extrusion of Circular Billet through Circular, Triangular and Square Multi-Hole Dies.International Journal of Engineering and Advanced Technology (IJEAT)
  63. Saroj, S., Sarangi, R. K., Das, D., & Nayak, R. K. (2019). Enhancemenet of Mechanical and Vibrational Properties of Plywood for Packaging and Container Applications. Materials Today: Proceedings, 18, 3952-3957.
  64. S Chand, P Chandrasekhar, RK Sarangi, RK Nayak. (2019). Influence of B4C particles on processing and strengthening mechanisms in aluminum metal matrix composites-a review.Materials Today: Proceedings 18, 5356-5363.
  65. Shah, S. K., Mishra, R., Prasanna, D., & Mohapatro, G. (2019). Fabrication and deviation analysis of a 5-axis robotic arm using image processing technique. Materials Today: Proceedings, 18, 4622-4629.
  66. Padhy, S. M., Mishra, P. C., Mishra, R., & Kambli, A. (2019). Ultra-Fast Cooling of Flat Metal Pate in a Modified Runout Table. In Advances in Fluid and Thermal Engineering (pp. 233-241). Springer, Singapore.
  67. Gourishankar, M., Ruby, M., Shubham, S., & Taniya, G. (2019). Real-time vibration analysis of a robotic arm designed for CT image guided diagnostic procedures doi:10.1007/978-981-13-6577-5_17
  68. Padhy, S. M., Mishra, P. C., Mishra, R., & Kambli, A. (2019). Ultra-fast cooling of flat metal pate in a modified runout table doi:10.1007/978-981-13-6416-7_22
  69. Mohapatra, S. K., Mishra, S. B., Joshi, K. K., & Pradhan, S. (2019). Effect of the hot deformation on mechanical and wear characteristics of the P/M AMC. Materials Today: Proceedings, 18, 5040-5047.
  70. Joshi, K. K., Behera, R. K., Kumar, R., Mohapatra, S. K., & Patro, S. S. (2019). Machinability Assessment of Inconel 800HT and its prediction using a hybrid fuzzy controller in EDM. Materials Today: Proceedings, 18, 5270-5275.
  71. Swain, S., Swain, A., Kar, S.P. (2019) Influence of different surface coatings on pool boiling heat transfer enhancement: A brief review Materials Today: Proceedings, 26, pp. 1903-1907
  72. Swain, S., Kar, S.P., Swain, A., Sarangi, R.K., Sekhar, P.C. (2019) Numerical prediction of solid-liquid front during laser melting of fused quartz Materials Today: Proceedings, 26, pp. 1864-1867.
  73. Satapathy, S. (2019). Waste Management in Thermal Power Plants. In Optimizing Big Data Management and Industrial Systems With Intelligent Techniques (pp. 170-182). IGI Global.
  74. Mandal, P., Kiran, U.N., Pati, S., Roy, S., Investigation of the effects of electrophoretic deposition parameters on 304SS steel coated with graphene oxide for PEMFC application, Materials Today: Proceedings, 2019, 26, pp. 654–659
  75. Tripathy, S., Behera, A., Pati, S., Roy, S. Corrosion resistant nickel coating on mild steel by cold gas dynamic spraying, Materials Today: Proceedings, 2019, 46, pp. 4395–4399
  76. Mandal, P., Kiran, U.N., Pati, S., Roy, S. Investigation of the effects of electrophoretic deposition parameters on 304SS steel coated with graphene oxide for PEMFC application Materials Today: Proceedings, 2019, 26, pp. 654–659
  77. Behera, R. K., Patro, S. S., & Kishore, K. (2019). Stability Analysis of Stiffened FG Sandwich Plates Based on FEA. Materials Today: Proceedings, 18(7), 3507–3513. https://doi.org/10.1016/j.matpr.2019.07.279
  78. Joshi,K, K., Behera, R. K., Kumar, R., Kumar, S., Mohapatra, S, K; Patro, S, S; (2019). Machinability Assessment of Inconel 800HT and its prediction using a hybrid fuzzy controller in EDM. Materials Today: Proceedings, 18(7), 5270–5275. https://doi.org/10.1016/j.matpr.2019.07.550
  79. Kishore, K., Behera, R. K., Kumar, R., & Kumar, S. (2019). Machinability Assessment of Inconel 800HT and its prediction using a hybrid fuzzy controller in EDM. Materials Today: Proceedings, 18(7), 5270–5275. https://doi.org/10.1016/j.matpr.2019.07.550
  80. Mohapatra, B., Kuruvilla, A., Dash, A., & Tripathy, S. (2021). A Framework of Lean–Six Sigma: An Evolutionary Approach. In Advances in Mechanical Processing and Design (pp. 641-647). Springer, Singapore.
  81. Mohapatra, P., Tripathy, S., Dash, A., & Biswal, A. (2021). Supplier relationship management is a key to supply chain management. In Advances in Mechanical Processing and Design (pp. 661-670). Springer, Singapore.
  82. Patnaik, A., Tripathy, S., & Dash, A. (2021). Identifying the features influencing sustainable products: A study on green cosmetics. In Advances in mechanical processing and design (pp. 631-640). Springer, Singapore.
  83. Pothal, L. K., Tripathy, S., Kumar, K., & Dash, A. (2021). Study of customer relationship management in automobile industry. In Advances in Mechanical Processing and Design (pp. 649-660). Springer, Singapore.
  1. Das, R. K., Sahoo, A. K., Mishra, P. C., Kumar, R., & Panda, A. (2018). Comparative machinability performance of heat treated 4340 Steel under dry and minimum quantity lubrication surroundings. Procedia Manufacturing, 20, 377-385.
  2. Panda, A., Sahoo, A. K., Rout, A. K., Kumar, R., & Das, R. K. (2018). Investigation of flank wear in hard turning of AISI 52100 grade steel using multilayer coated carbide and mixed ceramic inserts. Procedia Manufacturing, 20, 365-371.
  3. Panda, A., Sahoo, A. K., Panigrahi, I., & Kumar, R. (2018). Tool condition monitoring during hard turning of AISI 52100 Steel: A case study. Materials Today: Proceedings, 5(9), 18585-18592.
  4.  Rout A., Sahoo N and Kalita P, (2018)”laser based calibration of co-axial surface junction thermocouple for Transient temperature measurement”, Proceedings of 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), IIT Bombay, Mumbai India.
  5. Rout A., Sahoo N. and Kalita P., (2018) “Experimental investigation of tapered surface junction probe in a shock tube”, 5th National Symposium on Shock Waves, (NSSW),TBRL Chandigarh, Feb 26 – Feb 28, 2018.
  6. Behera, A., Behera, R. K., Sahu, P., Swain, R. R., & Mahapatra, T. R. (2018). Tensile and Failure Behavior of Kevlar Fiber Reinforced Epoxy Matrix Composite Exposed to Different Environmental Conditions. Materials Today: Proceedings, 5(9), 20250–20256. https://doi.org/10.1016/j.matpr.2018.06.396
  7. Behera, A., Panda, D., & Bhadauriya, M. (2018). Optimization of process parameters in Electro Discharge Machining of AISI 304 stainless steel. IOP Conference Series: Materials Science and Engineering, 390(1), 1–6. https://doi.org/10.1088/1757-899X/390/1/012071
  8. Das, D., Ali, R. F., Nayak, B. B., & Routara, B. C. (2018). Investigation on surface roughness and chip reduction coefficient during turning aluminium matrix composite. Materials Today: Proceedings, 5(11), 23541–23548.
  9. Das, D., Chakraborty, V., Nanda, B. K., & Routara, B. C. (2018). Turning performance of Al 7075/SiCp MMC and multi-response optimization using WPCA and Taguchi approach. Materials Today: Proceedings, 5(2), 6030–6037.
  10. Das, D., Chapagain, A., Nayak, R. K., & Routara, B. C. (2018). Multiple-response optimization for surface quality and productivity during turning Al 7075/SiCp composite in spray cooling environment. Materials Today: Proceedings, 5(9), 18052–18060.
  11. Kumari Sahu, R., Das, R., Dash, B., & Routara, B. C. (2018). Finite Element Analysis and Experimental Study on Forward, Backward and Forward-backward Multi-hole Extrusion Process. In Materials Today: Proceedings (Vol. 5). https://doi.org/10.1016/j.matpr.2017.12.105
  12. Mohanty, S., Routara, B. C., Nanda, B. K., Das, D. K., & Sahoo, A. K. (2018). Study of machining characteristics of Al-SiCp12% composite in nano powder mixed dielectric electrical discharge machining using RSM. Materials Today: Proceedings, 5(11), 25581–25590.
  13. Sahu, R. K., Das, R., & Routara, B. C. (2018). Effect of die pockets on the extruded products in Multi-hole Extrusion Process: A finite element simulation study. In IOP Conference Series: Materials Science and Engineering (Vol. 455, p. 12020).
  14. Singh, N., Panpalia, N., Singh, M. M., Routara, B. C., & Nayak, R. K. (2018). Comparison of machining characteristics of Inconel 601 with normal and cryogenic cooled electrode in EDM using RSM. In IOP Conference Series: Materials Science and Engineering (Vol. 455, p. 12078).
  15. Singh, N., Routara, B. C., & Nayak, R. K. (2018). Study of machining characteristics of Inconel 601 with cryogenic cooled electrode in EDM using RSM. Materials Today: Proceedings, 5(11), 24277–24286.
  16. Tiwari, R., Das, D., Sahoo, A. K., Kumar, R., Das, R. K., & Routara, B. C. (2018). Experimental investigation on surface roughness and tool wear in hard turning JIS S45C steel. Materials Today: Proceedings, 5(11), 24535–24540.
  17. Nayak, A., Jesthi, D. K., Routara, B. C., Das, D., & Nayak, R. K. (2018). Tribological properties of glass/carbon hybrid composites through inter-ply arrangement using Response Surface Methodology. Materials Today: Proceedings, 5(9), 19828–19835.
  18. Jena, B. P., Jagdev, A., Satapathy, S., Nayak, B. B., Patel, S., & Mohapatra, T. K. (2018). An Investigation on noise reduction by natural acoustic materials. Materials Today: Proceedings, 5(9), 19237–19241. https://doi.org/10.1016/j.matpr.2018.06.280
  19. Nayak, B. B., Abhishek, K., & Mahapatra, S. S. (2018). Parametric Appraisal of WEDM Taper Cutting Process Using Maximum Deviation Method. Materials Today: Proceedings, 5(5), 11601–11607. https://doi.org/10.1016/j.matpr.2018.02.129
  20. Jagdev, A., Prava Jena, B., Bijeta Nayak, B., & Satapathy, S. (2018). Preparation and characterization of Mechanical Properties of Epoxy Resin Composites reinforced with Non Bio-degradable Wastes. Materials Today: Proceedings, 5(9), 19723–19727. https://doi.org/10.1016/j.matpr.2018.06.334
  21. Das, D., Chaubey, A. K., Nayak, B. B., Mishra, P. C., & Samal, C. (2018). Investigation on cutting tool wear in turning Al 7075/SiCp metal matrix composite. IOP Conference Series: Materials Science and Engineering, 377(1). https://doi.org/10.1088/1757-899X/377/1/012110
  22. Das, D., Mukherjee, S., Dutt, S., Bijeta Nayak, B., & Kumar Sahoo, A. (2018). High speed turning of EN24 steel – A Taguchi based grey relational approach. Materials Today: Proceedings, 5(2), 4097–4105. https://doi.org/10.1016/j.matpr.2017.11.670
  23. Das, D., Saha, S., Nayak, B. B., & Nanda, B. K. (2018). Surface quality and material removal rate in turning aluminium matrix composite – A grey relational approach. Materials Today: Proceedings, 5(11), 23568–23575. https://doi.org/10.1016/j.matpr.2018.10.145
  24. Bijeta Nayak, B., & Sankar Mahapatra, S. (2018). An intelligent approach for prediction of angular error in taper cutting using wire-EDM. Materials Today: Proceedings, 5(2), 6121–6127. https://doi.org/10.1016/j.matpr.2017.12.218
  25. Das, D., Ali, R. F., Nayak, B. B., & Routara, B. C. (2018). Investigation on surface roughness and chip reduction coefficient during turning aluminium matrix composite. Materials Today: Proceedings, 5(11), 23541–23548. https://doi.org/10.1016/j.matpr.2018.10.142
  26. Bijeta Nayak, B., Abhishek, K., Sankar Mahapatra, S., & Das, D. (2018). Application of WPCA based taguchi method for multi-response optimization of abrasive jet machining process. Materials Today: Proceedings, 5(2), 5138–5144. https://doi.org/10.1016/j.matpr.2017.12.095
  27. Praveen Alok, D Sahu (2018), Flow analysis of isobutane (R-600A) inside an adiabatic capillary tube, IOP Conference Series: Materials Science and Engineering, 310 012148
  28. Praveen Alok, D Sahu (2018), Experimental Study on Vapor Adsorption Refrigeration System with Carbon-Methanol Pair, 376 (1), 012086
  29. Sarma, C., Gupta, A., Singh, A., Bhattacharjee, I., Mohanta, A., Tripathy, S., & Singhal, D. (2018, July). Limitations of Probable Vehicle Headlight Technologies–A Critical Review. In IOP Conference Series: Materials Science and Engineering (Vol. 390, No. 1, p. 012073). IOP Publishing.
  30. Singhal, D., Tripathy, S., & Jena, S. K. (2018, June). Factors influencing the remanufacturing of electrical and electronics products in India: A SWOT-AHP approach. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012061). IOP Publishing.
  31. Singhal, D., Tripathy, S., & Jena, S. K. (2018). DEMATEL approach for analyzing the critical factors in remanufacturing process. Materials Today: Proceedings, 5(9), 18568-18573.
  32. Singhal, D., Tripathy, S., Jena, S. K., Nayak, K. K., & Dash, A. (2018). Interpretive structural modelling (ISM) of obstacles hindering the remanufacturing practices in India. Procedia Manufacturing, 20, 452-457.
  33. Das D*, Mishra PC, Chaubey AK and Samal C, Characterization of the developed aluminum matrix composites-an experimental analysis. Materials Today: Proceedings 5 (2018) 3243–3249. Elsevier
  34. Das D*, Sahoo BP, Bansal S and Mishra P, Experimental investigation on material removal rate and chip forms during turning T6 tempered Al 7075 alloy. Materials Today: Proceedings 5 (2018) 3250–3256. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2017.11.566
  35. Das D*, Chakraborty V, Nanda BK and Routara BC, Turning performance of Al 7075/SiCp MMC and multi-response optimization using WPCA and Taguchi approach. Materials Today: Proceedings 5 (2018) 6030–6037. Elsevier
  36. Das D*, Thakur RK, Chaubey AK and Sahoo AK, Optimization of machining parameters and development of surface roughness models during turning Al-based metal matrix composite. Materials Today: Proceedings 5 (2018) 4431–4437. Elsevier
  37. Das D*, Mukherjee S, Dutt S, Nayak BB and Sahoo AK, High speed turning of EN24 steel – a Taguchi based grey relational approach. Materials Today: Proceedings 5 (2018) 4097–4105. Elsevier
  38. Singh N, Routara BC* and Das D, Study of machining characteristics of Inconel 601 in EDM using RSM. Materials Today: Proceedings 5 (2018) 3438–3449. Elsevier
  39. Nayak BB*, Abhishek K, Mahapatra SS and Das D, Application of WPCA based Taguchi method for multi-response optimization of abrasive Jet machining process. Materials Today: Proceedings 5 (2018) 5138–5144. Elsevier
  40. Das D*, Chaubey AK, Nayak BB, Mishra PC, Samal C, Investigation on cutting tool wear in turning Al 7075/SiCp metal matrix composite, Materials Science and Engineering 377 (2018) 1-7. IOP Publishers, DOI:10.1088/1757-899X/377/1/012110
  41. Das D*, Ali RF, Nayak BB, Routara BC, Investigation on surface roughness and chip reduction coefficient during turning aluminium matrix composite. Materials Today: Proceedings 5 (2018) 23541–23548. Elsevier
  42. Das D*, Saha S, Nayak BB and Nanda BK, Surface quality and material removal rate in turning aluminium matrix composite- a grey relational approach. Materials Today: Proceedings 5 (2018) 23568–23575. Elsevier
  43. Tiwari R, Das D*, Sahoo AK, Kumar R, Das RK and Routara BC, Experimental investigation on surface roughness and tool wear in hard turning JIS S45C steel. Materials Today: Proceedings 5 (2018) 24535–24540. Elsevier
  44. Mohanty S*, Routara BC, Nanda BK, Das D and Sahoo AK, Study of machining characteristics of Al-SiCp12% composite in nano powder mixed dielectric electrical discharge machining using response surface methodology. Materials Today: Proceedings 5 (2018) 25581–25590. Elsevier
  45. Das D* and Chapagain A, Cutting temperature and tool flank wear during turning aluminium matrix composite in air-water spray environment – a Taguchi approach, Materials Today: Proceedings 5 (2018) 18527–18534. Elsevier
  46. Das D*, and Chapagain A, Nayak RK and Routara BC, Multiple-response optimization for surface quality and productivity during turning Al 7075/SiCp composite in spray cooling environment, Materials Today: Proceedings 5 (2018) 18052–18060. Elsevier
  47. Das D*, Chakraborty V, Chaubey AK and Nayak RK, Investigation on properties of SiC reinforced Zn-Mg-Cu based Al metal matrix composites – a case study, Materials Today: Proceedings 5 (2018) 19874–19882. Elsevier
  48. Sahoo BP and Das D*, Tribological behaviour of ceramic and carbon nano-tube reinforced metal matrix composites – a review, Materials Today: Proceedings 5 (2018) 20549–20559. Elsevier, DOI: https://doi.org/10.1016/j.matpr.2018.06.433
  49. Das D* and Chakraborty V, Dry condition machining performance of T6 treated aluminium matrix composites, Materials Today: Proceedings 5 (2018) 20145–20151. Elsevier
  50. Sahoo AK*, Panda A, Kumar R, Das RK and Das D, Investigation on machinability characteristics during turning Al6063 alloy using uncoated carbide insert, Materials Today: Proceedings 5 (2018) 18120–18128. Elsevier
  51. Nayak A, Jesthi DK, Routara BC, Das D and Nayak RK*, Tribological properties of glass/carbon hybrid composites through inter-ply arrangement using Response Surface Methodology, Materials Today: Proceedings 5 (2018) 19828–19835. Elsevier
  52. Mandal P, Jesthi DK, Das D, Rout AK and Nayak RK*, Three-body abrasion wear performance of glass/carbon fiber reinforced polymer hybrid composites, Materials Today: Proceedings 5 (2018) 20777–20784. Elsevier
  53. Panpalia, N., Singh, M. M., Mandal, N., Rahul., & Routara, B. C. (2018, December). Comparison of machining characteristics of Inconel 601 with Brass and Graphite electrode in EDM using Response Surface Methodology (RSM). In IOP Conference Series: Materials Science and Engineering (Vol. 455, No. 1, p. 012080). IOP Publishing.
  54. Rahul., Srivastava, A., Mishra, D. K., Chatterjee, S., Datta, S., Biswal, B. B., & Mahapatra, S. S. (2018). Multi-response optimization during electro-discharge machining of super alloy Inconel 718: application of PCA-TOPSIS. Materials today: proceedings, 5(2), 4269-4276.
  55. Rahul., Datta, S., Biswal, B. B., & Mahapatra, S. S. (2018). Optimization of electro-discharge machining responses of super alloy Inconel 718: use of satisfaction function approach combined with Taguchi philosophy. Materials Today: Proceedings, 5(2), 4376-4383.
  56. Anurag, A., Kumar, R., Roy, S., Joshi, K. K., Sahoo, A. K., & Das, R. K. (2018). Machining of Ti-6Al-4V ELI Alloy: A brief review. IOP Conference Series: Materials Science and Engineering, 390(1). https://doi.org/10.1088/1757-899X/390/1/012112
  57. Anurag, A., Kumar, R., Joshi, K. K., & Das, R. K. (2018). Analysis of Chip Reduction Coefficient in Turning of Ti-6Al-4V ELI. IOP Conference Series: Materials Science and Engineering, 390(1). https://doi.org/10.1088/1757-899X/390/1/012113
  58. Behera, R. K., Patro, S. S., Sharma, N., & Joshi, K. K. (2018). Eigen-frequency Analysis of Stiffened Laminated Composite Plates Using Finite Elements. Materials Today: Proceedings, 5(9), 20152–20159. https://doi.org/10.1016/j.matpr.2018.06.384
  59. Joshi, K. K., Kumar, R., & Anurag. (2018). An Experimental Investigations in Turning of Incoloy 800 in Dry, MQL and Flood Cooling Conditions. Procedia Manufacturing, 20, 350–357. https://doi.org/10.1016/j.promfg.2018.02.051
  60. Kishore Joshi, K., Behera, R. K., & Anurag. (2018). Effect of minimum quantity lubrication with Al2O3 Nanofluid on Surface Roughness and its prediction using hybrid fuzzy controller in turning operation of Inconel 600. Materials Today: Proceedings, 5(9), 20660–20668. https://doi.org/10.1016/j.matpr.2018.06.449
  61. Mohanty M, Pradhan M. (2018). Static stability of a Rotating Symmetric Sandwich beam subjected to axial pulsating load. International Journal of Scientific & Engineering Research Volume 9, Issue 4, April-2018, ISSN 2229-5518
  62. Mohanty M, Praddhan M, Mishra R. (2018). Stability analysis of a two-layer elastic beam resting on a variable Pasternak foundation subjected to an axial pulsating load and thermal gradient. Materials Today Proceedings, Volume 5, Issue 11, Part 3, 2018, Pages 23619-23628
  63. Tripathi, J. P., Ghoshal, S. K., Hasan, M. E., Dasgupta, K., & Das, J. (2018, June). Speed control of a hydrostatic drive using inverse steady state model. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012115). IOP Publishing.
  64. Behera, R. K., Garg, K., Patro, S. S., & Sharma, N. (2018). Eigen-frequency analysis of spherical shell laminated composite plates with and without central cutouts using finite elements. IOP Conference Series: Materials Science and Engineering, 390(1). doi: 10.1088/1757-899X/390/1/012043
  65. Behera, R. K., Patro, S. S., Sharma, N., & Joshi, K. K. (2018). Eigen-frequency Analysis of Stiffened Laminated Composite Plates Using Finite Elements. Materials Today: Proceedings, 5(9). doi: 10.1016/j.matpr.2018.06.384
  66. Dash, S., Sharma, N., Mahapatra, T. R., Panda, S. K., & Sahu, P. (2018). Free vibration analysis of functionally graded sandwich flat panel. IOP Conference Series: Materials Science and Engineering, 377(1). doi: 10.1088/1757-899X/377/1/012140
  67. Patro, S. S., Behera, R. K., & Sharma, N. (2018). Prediction of free vibration responses of orthotropic stiffened flat panels. Materials Today: Proceedings, 5(9). doi: 10.1016/j.matpr.2018.06.386
  68. Patro, S. S., Sutradhar, D., Behera, R. K., & Sharma, N. (2018). Free vibration analysis of stiffened laminated composite plate in a thermal environment. IOP Conference Series: Materials Science and Engineering, 390(1). doi: 10.1088/1757-899X/390/1/012040
  69. Ramteke, P. M., Mahapatra, B. P., Panda, S. K., & Sharma, N. (2020). Static deflection simulation study of 2D Functionally graded porous structure. Materials Today: Proceedings, 33. doi: 10.1016/j.matpr.2020.03.537
  70. Sharma, N., Mahapatra, T. R., Kumar Panda, S., & Mazumdar, A. (2018). Acoustic radiation characteristics of un-baffled laminated composite conical shell panels. Materials Today: Proceedings, 5(11). doi: 10.1016/j.matpr.2018.10.234
  71. Sharma, N., Mahapatra, T. R., & Panda, S. K. (2018). Analysis of vibro-acoustic response of un-baffled laminated composite conical shell panel with varying thickness. IOP Conference Series: Materials Science and Engineering, 377(1). doi: 10.1088/1757-899X/377/1/012139
  72. Sharma, N., Mahapatra, T. R., Panda, S. K., & Sahu, P. (2018). Characterization of the Acoustic Radiation Properties of Laminated and Sandwich Composite Panels in Thermal Environment. IOP Conference Series: Materials Science and Engineering, 338(1). doi: 10.1088/1757-899X/338/1/012031
  73. Behera, A., Behera, R.K., Sahu, P., Swain, R.R., Mahapatra, T.R., 2018. Tensile and Failure Behavior of Kevlar Fiber Reinforced Epoxy Matrix Composite Exposed to Different Environmental Conditions. Mater. Today Proc. 5, 20250–20256. https://doi.org/10.1016/j.matpr.2018.06.396
  74. Dash, S., Sharma, N., Mahapatra, T.R., Panda, S.K., Sahu, P., 2018. Free vibration analysis of functionally graded sandwich flat panel. IOP Conf. Ser. Mater. Sci. Eng. 377. https://doi.org/10.1088/1757-899X/377/1/012140
  75. Sharma, N., Mahapatra, T.R., Panda, S.K., Sahu, P., 2018. Characterization of the Acoustic Radiation Properties of Laminated and Sandwich Composite Panels in Thermal Environment. IOP Conf. Ser. Mater. Sci. Eng. 338. https://doi.org/10.1088/1757-899X/338/1/012031
  76. Jha, P., Kumar Gautam, R., & Tyagi, R. (2018). Modeling the dry sliding wear behavior of Cu-4wt%Ni-TiC composites using response surface methodology. Materials Today: Proceedings, 5(2), 4692–4701. https://doi.org/10.1016/j.matpr.2017.12.041
  77. Sahu, R. K., Das, R., Dash, B., & Routara, B. C. (2018). Finite element analysis and experimental study on forward, backward and forward-backward multi-hole extrusion process. Materials Today: Proceedings, 5(2), 5229-5234.
  78. Sahu, R. K., Das, R., & Routara, B. C. (2018, December). Effect of die pockets on the extruded products in Multi-hole Extrusion Process: A finite element simulation study. In IOP Conference Series: Materials Science and Engineering (Vol. 455, No. 1, p. 012020). IOP Publishing.
  79. Shah, S. K., Mishra, R., & Mohapatro, G. (2018, July). Experimental and theoretical design analysis and modeling of a CT image guided robotic arm. In 2018 International Conference on Engineering, Applied Sciences, and Technology (ICEAST) (pp. 1-4). IEEE.
  80. Mishra, R., Naskar, T. K., & Acharya, S. (2018). Optimum Design of Elastic and Flexible Linkages for Motion and Path Generation. Materials Today: Proceedings, 5(2), 4629-4636.
  81. Ghosh, T., Roy, A., Mishra, R., & Kamlesh, S. S. (2018). Structural optimization of a CT guided robotic arm based on static analysis. Materials Today: Proceedings, 5(9), 19586-19593.
  82. Mohanty, M., Pradhan, M., & Mishra, R. (2018). Stability analysis of a two-layer elastic beam resting on a variable Pasternak foundation subjected to an axial pulsating load and thermal gradient. Materials Today: Proceedings, 5(11), 23619-23628.
  83. Kamlesh, S. S., & Mishra, R. (2018). Advanced path simulation of a 5R robotic arm for CT guided medical procedures. Materials Today: Proceedings, 5(2), 6149-6156.
  84. Padhy, S. M., Mishra, P. C., & Mishra, R. (2018). Nozzle positioning for ultra-fast cooling of steel strips in a run out table. Materials Today: Proceedings, 5(9), 18656-18663.
  85. Padhy, S. M., Sinha, R., Mishra, R., & Mishra, P. C. (2018). Design analysis of a hot strip mill runout table bed under ANSYS workbench. In MATEC Web of Conferences (Vol. 192, p. 02038). EDP Sciences.
  86. Mishra, R., Mohapatro, G., & Behera, R. (2018). Structural and dynamic analysis of optimized four bar mechanism considering counterweight in coupler link. Materials Today: Proceedings, 5(2), 5467-5474.
  87. Roy, A., Ghosh, T., Mishra, R., & Kamlesh, S. S. (2018). Dynamic FEA analysis and optimization of a robotic arm for CT image guided procedures. Materials Today: Proceedings, 5(9), 19270-19276.
  88. Shah, S. K., Mishra, R., & Choudhury, S. (2018). Preliminary design of an 7 DOF robotic manipulator positioning biopsy needle. Materials Today: Proceedings, 5(9), 19140-19146.
  89. Maurya, M., Mishra, R., & Panigrahi, I. (2018). Multi crack detection in structures using artificial neural network. Paper presented at the IOP Conference Series: Materials Science and Engineering, , 402(1) doi:10.1088/1757-899X/402/1/012142
  90. Mohapatra, S. K., Maity, K., Ghadei, S. B., & Khan, A. (2018, July). Effect of Hot Extrusion through Mathematically Contoured Die on Mechanical and Tribological Characteristics of the AMC Prepared through P/M Route. In IOP Conference Series: Materials Science and Engineering (Vol. 390, No. 1, p. 012008). IOP Publishing.
  91. Mohapatra, S. K., Maity, K., Bhuyan, S. K., & Satpathy, M. P. (2018, March). Mechanical and Tribological Characteristics of the AMC, Prepared by P/M Route along with Thermo-Mechanical Treatment. In IOP Conference Series: Materials Science and Engineering (Vol. 338, No. 1, p. 012023). IOP Publishing.
  92. Hotta, S. K., Sahoo, N., Rout, A. K., Mohanty K., Mahanta, P., “Effect of compression ratio on the cyclic variability and thermal efficiency of a biogas fueled spark ignition engine”, 7nd International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), Dec 10-12, 2018, Indian Institute Technology Bombay, Mumbai, India.
  93. Hotta, S. K., Sahoo, N., Mohanty K., Mahanta, P., “Effect of compression ratio on the performance of a constant speed spark ignition engine operating on raw biogas”, 2nd International Conference on Sustainable Energy and Environmental  Challenges, Jan 01-03, 2018, Indian Institute of Science, Bangalore, India.
  94. Nayak, S. K., Mishra, P. C., Sarangi, R. K. (2018). Optimization of Controlling Parameters for Mass Impingement Density in a Novel Patternator. 7th Int. and 45th National Conf. on Fluid Mechanics and Fluid Power, December 11-12, IIT Bombay, India. Paper ID-FMFP18-582.
  95.  Nayak, S. K., Mishra, P. C., Sarangi, R. K. (2018). Optimization of Controlling Parameters for Nanofluid Based Ultra-Fast-Cooling. Fifth Int. Conf. on Computational Methods for Thermal Problems ThermaComp2018, July 9-11, Indian Institute of Science, Bangalore, India.
  96.  Sarangi, R. K., and Nayak, S. K., (2018). ” Modeling of Boiling Heat Transfer in Microchannel for Non uniform Heat Input. Fifth Int. Conf. on Computational Methods for Thermal Problems ThermaComp2018, July 9-11, , Indian Institute of Science, Bangalore, India.
  97. Sukumar, S., Kar, S.P.(2018) Parametric Analysis of Pulsed Laser Melting Process IOP Conference Series: Materials Science and Engineering, 338 (1), art. no. 012009
  98. Kundu, P., Sukumar, S., Kar, S.P. (2018) Numerical modeling for freezing and cryogenic preservation for viability of biological tissue Materials Today: Proceedings, 5 (9), pp. 18823-18832.
  99. Sadarang, J., Nayak, S., Nayak, G., Panigrahi, I., & Nayak, R. K. (2018, August). Dynamic analysis for delamination detection in carbon fiber composite beam. In IOP conference series: Materials Science and engineering (Vol. 402, No. 1, p. 012143). IOP Publishing.
  100. Panda, S. R., Mishra, P. C., & Ukamanal, M. (2018). Effects of modified waste fly ash reinforcement on mechanical behavior of novel ALFA composite. Materials Today: Proceedings, 5(11), 24827-24835.
  101. Panda, S. R., Mohapatro, M. B. R., & Mishra, P. C. (2018). Investigation on frictional and machining characteristics of novel ALFA composite reinforced with treated waste fly ash. Materials Today: Proceedings, 5(9), 19728-19737.
  102.  Das, S., Guha,S.,  Ghadai, R., Kumar, D.,  Swain, B.P., (2018) Morphological and Structural Properties of CVD Deposited Titanium Aluminium Nitride (TiAlN)Thin Films. 377.IOP Science.
  103.  Guha, S.,  Bandyopadhyay, A.,  Das, S.,  Swain,B. P., (2018) Synthesis and characterization of Titanium Silicon Nitride (TiSiN) thin film: A review, 377, IOP Science.
  104.  Bagchi, A., Guha, S., (2018) Parametric optimization of burr height reduction and machining time in drilling operation on stainless steel specimen, 377, IOP Science.
  105.  Guha,S.,  Bandyopadhyay, A.,  Das, S.,  Swain, B. P., (2018) Investigation of Titanium Silicon Nitride: A Review. Advances in Electronics, Communication and Computing, Lecture Notes Electrical Engineering, 443, 169-179.
  106. Mishra, D., & Satapathy, S. (2018). Hand Tool Injuries of Agricultural Farmers of South Odisha in India. Materials Today Proceedings, 5(9-3), 17648-17653. https://doi.org/10.1016/j.matpr.2018.06.084
  107. Mishra, D., & Satapathy, S. (2018). Musculoskeletal & Risk Assessment during Threshing of Rice-grains. MATEC Web of Conferences, 172, 05005. https://doi.org/10.1051/matecconf/201817205005
  108. Mandal, P., Kumar Chanda, U., Roy, S. A review of corrosion resistance method on stainless steel bipolar plate Materials Today: Proceedings, 2018, 5(9), pp. 17852–17856
  109. Behera, R. K., Patro, S. S., Sharma, N., & Joshi, K. K. (2018). Eigen-frequency Analysis of Stiffened Laminated Composite Plates Using Finite Elements. Materials Today: Proceedings, 5(9), 20152–20159. https://doi.org/10.1016/j.matpr.2018.06.384
  110. Patro, S. S., Behera, R. K., & Sharma, N. (2018). Prediction of free vibration responses of orthotropic stiffened flat panels. Materials Today: Proceedings, 5(9), 20170–20176. https://doi.org/10.1016/j.matpr.2018.06.386
  111. Patro, S. S., Sutradhar, D., Behera, R. K., & Sharma, N. (2018). Free vibration analysis of stiffened laminated composite plate in a thermal environment. IOP Conference Series: Materials Science and Engineering, 390(1). https://doi.org/10.1088/1757-899X/390/1/012040
  112. Singhal, D., Tripathy, S., Jena, S. K., Nayak, K. K., & Dash, A. (2018). Interpretive structural modelling (ISM) of obstacles hindering the remanufacturing practices in India. Procedia Manufacturing, 20, 452-457.
  113. Singhal, D., Tripathy, S., & Jena, S. K. (2018). DEMATEL approach for analyzing the critical factors in remanufacturing process. Materials Today: Proceedings, 5(9), 18568-18573.
  114. Mohanty, G., Mondal, G., Surekha, B., & Tripathy, S. (2018). Experimental investigations on graphite mixed electric discharge machining of EN-19 alloy steel. Materials Today: Proceedings, 5(9), 19418-19423.
  115. Nayak, S., Tripathy, S., & Dash, A. (2018, June). A critical analysis of signal passed at danger (SPAD) events of Indian railways. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012208). IOP Publishing.
  116. Singhal, D., Tripathy, S., & Jena, S. K. (2018, June). Factors influencing the remanufacturing of electrical and electronics products in India: A SWOT-AHP approach. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012061). IOP Publishing.
  117. Majumdar, S., & Tripathy, S. (2018, June). Service Sector Performance: A Critical Review.In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p.012063). IOP Publishing.
  118. Mohapatra, A., & Tripathy, S. (2018, June). A critical review of the use of fuel cells towards sustainable management of resources. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012135). IOP Publishing.
  119. Dash, A., & Tripathy, S. (2018, June). Mechanical characteristics of chicken feather teak wood dust epoxy filled composite. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012111). IOP Publishing.
  120. Pothal, L. K., Tripathy, S., & Satapathy, S. (2018, June). Supplier Relationship Management towards Quality Management System of Indian automotive manufacturing industry-A Total Interpretive Structural Modeling approach. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012145). IOP Publishing.
  121. Majumdar, S., & Tripathy, S. (2018, July). Performance Evaluation of Indian Education Sector using Interpretive Structural Modelling. In IOP Conference Series: Materials Science and Engineering (Vol. 390, No. 1, p. 012014). IOP Publishing.
  122. Sarma, C., Gupta, A., Singh, A., Bhattacharjee, I., Mohanta, A., Tripathy, S., & Singhal, D. (2018, July). Limitations of Probable Vehicle Headlight Technologies–A Critical Review. In IOP Conference Series: Materials Science and Engineering (Vol. 390, No. 1, p. 012073). IOP Publishing.
  123. Nayak, S., & Tripathy, S. (2018, July). A Critical Evaluation of Impact of Human Error: In Rail System Failure with a View to Enhance Safety. In IOP Conference Series: Materials Science and Engineering (Vol. 390, No. 1, p. 012024). IOP Publishing.
  124. Dash, A., Pothal, L. K., & Tripathy, S. (2018, July). Factors affecting Supplier Relationship Management: An AHP Approach. In IOP Conference Series: Materials Science And Engineering (Vol. 390, No. 1, p. 012056). IOP Publishing.
  125. Bharadwaj, A., Pati, A. K., Srivastava, H., Panda, A., & Tripathy, S. (2018, July). Basic Problems faced by the Small Scale Industry Sector. In IOP Conference Series: Materials Science and Engineering (Vol. 390, No. 1, p. 012093). IOP Publishing.
  126. Muduli, K., Pumwa, J., Yadav, D. K., Kumar, R., & Tripathy, S. (2018, December). A Grey Relation Approach for Selection of Industrial Robot. In 2018 International Conference on Information Technology (ICIT) (pp. 141-144). IEEE.
  1. Sheth, M. M., Roy, A., & Harichandan, A. B. (2017). Modeling of fuel reactor in a chemical looping combustion using CFD. Proceedings of the 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, December 28-30, IIT Kharagpur.
  2. Dangi, D. R., Thaker P.B., and Harichandan A.B. (2017). MMOC: A novel idea for fully expanded flow in supersonic nozzles. Proceedings of the 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, December 28-30, IIT Kharagpur.
  3. Limbasiya, N. M., & Harichandan, A. B. (2017). Enhancement of heat transfer in heatsinks using aerodynamically shaped fins. 2nd International Conference for Convergence in Technology (I2CT), IEEE, April 7-9.
  4. Sheth, M. M., & Harichandan, A. B. (2017). Bubble hydrodynamics of a CH4-fueled chemical looping combustion system. Computational Science Symposium. IISc Bangalore, Mar 16-18.
  5. Arefi, G. A., Das, R., Sahoo, A. K., Routara, B. C., & Nanda, B. K. (2017). A Study on the Effect of Machining Parameters in Turning of Lead Alloy. In Materials Today: Proceedings (Vol. 4). https://doi.org/10.1016/j.matpr.2017.07.088
  6. Bhuyan, R. K., Mohanty, S., & Routara, B. C. (2017). RSM and Fuzzy logic approaches for predicting the surface roughness during EDM of Al-SiCp MMC. Materials Today: Proceedings, 4(2), 1947–1956.
  7. Bhuyan, R. K., Mohanty, S., & Routara, B. C. (2017). RSM and Fuzzy logic approaches for predicting the surface roughness during EDM of Al-SiCp MMC. Materials Today: Proceedings, 4(2), 1947–1956.
  8. Das, D., Pattanaik, S., Routara, B. C., Mishra, P. C., & Samal, C. (2017). Dry sliding wear behaviour of SiCp reinforced Zn-Mg-Cu based aluminium matrix composite. Materials Today: Proceedings, 4(2), 2965–2974.
  9. Dash, S., Routara, B. C., & Nayak, R. K. (2017). Optimization of process parameters in milling of TiO2 filled GFRP composite. Materials Today: Proceedings, 4(2), 3023–3032.
  10. Mohanty, S., Routara, B. C., & Bhuayan, R. K. (2017). Experimental investigation of machining characteristics for Al-SiC12% composite in Electro-discharge machining. In Materials Today: Proceedings (Vol. 4). https://doi.org/10.1016/j.matpr.2017.07.227
  11. Nayak, R. K., Rathore, D., Ray, B. C., & Routara, B. C. (2017). Inter Laminar Shear Strength (ILSS) of Nano Al2O3 Filled Glass Fiber Reinforced Polymer (GFRP) Composite-A Study on Loading Rate Sensitivity. Materials Today: Proceedings, 4(8), 8688–8696.
  12. Rout, S., Gantayat, S., Parida, A. K., & Routara, B. C. (2017). Study of mechanical property and wear behaviour of GFRP composite filled with carbon nano fiber. In Materials Today: Proceedings (Vol. 4). https://doi.org/10.1016/j.matpr.2017.07.226
  13. Misra, S., Rana, B. K., Das, A. K., & Das, P. K. (2017). Taylor Bubble Dynamics in Pipe Fittings: A Numerical Study. In Fluid Mechanics and Fluid Power–Contemporary Research (pp. 989-1002). Springer, New Delhi.
  14. Rana, B. K., Paikara, L. S., Das, A. K., & Das, P. K. (2017). Collapse of a Taylor bubble at free surface: An experimental investigation. In Fluid Mechanics and Fluid Power–Contemporary Research (pp. 957-967). Springer, New Delhi.
  15. Das D*, Pattanaik S, Routara BC, Mishra PC and Samal C, Dry sliding wear behaviour of SiCp reinforced Zn-Mg-Cu based aluminium matrix composite. Materials Today: Proceedings 4 (2017) 2965–2974. Elsevier, DOI: 10.1016/j.matpr.2017.02.178
  16. Pattanayak, N. Madhu, A. Panda, M. K. Sahoo, K. Mohanta” A comparative study on mechanical properties of Al-SiO2 composites fabricated using rice husk silica in crystalline and amorphous form as reinforcement “ IMME 17, NIT, Trichy, March 10-12 (2017).
  17. Mohapatro, G., Kamlesh, S. S., & Mishra, R. (2017, May). Optimized path tracing analysis and application of four-bar linkage and CT guided robotic arm. In 2017 International Conference on Computing, Communication and Automation (ICCCA) (pp. 967-972). IEEE.
  18. Hotta, S. K., Sahoo, N., Mohanty K., Mahanta, P., Choudhari, A. J., “Effect of compression Ratio on the performance and emission characteristics of a raw biogas fueled spark ignition engine”, 6th International Conference on Advances in Energy Research, Dec12-14, 2017, IIT Bombay, India.
  19. Hotta, S. K., Sahoo, N., Mohanty K., Mekonen, M. W., “Effect of air-fuel ratio on the performance and emission characteristic of a biogas fuelled spark ignition engine”, 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Dec 28-30, 2017, IIT Kharagpur, India. http://www.cygnusdvlp.in/eprosseding/ICTACEM_2017/papers.html
  20. Hotta, S. K., Sahoo, N., Mohanty K., Mahanta, P., “Comparative assessment of a spark ignition engine fuelled with petrol and raw biogas”, Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) ,Dec 27-30, 2017, pp.1455-1462, BITS Pilani, Hyderabad, India. DOI: 10.1615/IHMTC-2017.2010.
  21. Mekonen,  M. W., Sahoo, N., Hotta, S. K., “Effect of preheating and fuel injection pressure on performance parameters of diesel engine running with biodiesel”, 6th International Conference on Advances in Energy Research, Dec12-14, 2017, IIT Bombay, India.
  22. Choudhari, A. J., Hotta, S. K., Kulkarni, V., Sahoo, N., “Different Gaseous Fuels under Variable Compression Ratio and Spark Location in Spark Ignition Engine: The Comparative Performance Study”, 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Dec 28-30, 2017, IIT Kharagpur, India.http://www.cygnusdvlp.in/eprosseding/ICTACEM_2017/papers.html
  23. Menelik Walle Mekonen , Niranjan Sahoo and Santosh Kumar Hotta, “Effects of Injector Nozzle Geometry on Diesel Engine Parameters Fuelled with Preheated Pure Biodiesel” 7th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Dec 28-30, 2017, IIT Kharagpur, India.http://www.cygnusdvlp.in/eprosseding/ICTACEM_2017/papers.html
  24. Nayak, S. K., Mishra, P. C., Joe, A. C., and Kumar, P. (2017). Enhanced Heat Transfer from Hot Surface by Nanofluid Based Ultra- Fast Cooling: An Experimental Investigation. 2nd Int. ISHMT-ASTFE Heat and Mass Transfer Conf., December 27-37, BITS Pilani Hyderabad Campus, India. Paper ID-IHMTC-2017-279.
  25. Sushobhan, B.R., Kar, S.P. (2017) Thermal Modeling of Melting of Nano based Phase Change Material for Improvement of Thermal Energy Storage  Energy Procedia, 109, pp. 385-392.
  26. Nayak, J., Sahoo, S. S., Swain, R.K., Mishra, A. & Chakrabarty, S.  (2017). ‘Construction of Box Type Solar Cooker and Its Adaptability to Industrialized Zone’, 2nd International Conference on Solar Energy Photovoltaic, Materials Today: Proceedings 4 (14), 12565-12570
  27. Pradhan, S., Samantaray, A. K., & Bhattarcharyya, R. (2017, November). Evaluation of ride comfort in a railway passenger vehicle with integrated vehicle and human body bond graph model. In ASME International Mechanical Engineering Congress and Exposition (Vol. 58479, p. V012T16A013). American Society of Mechanical Engineers.
  28. Chaudhuri, S., Sahoo, S., Tiwari, H. (2017).Thermal chracteristics of non-Newtonian third grade fluid flow through two parallel plates with viscous dissipation,Poceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS Pilani, Hyderabad, India,page 897-904, 2017.
  29. Swain, S., Muduli, K., Biswal, J. N., Tripathy, S., & Panda, T. K. (2017). Evaluation of barriers of health care waste management in India—a gray relational analysis approach. In Proceedings of the 5th international conference on frontiers in intelligent computing: Theory and applications (pp. 181-188). Springer, Singapore.
  30. Mishra V.K., Basu D.N., Heat transfer characteristics of 2d-axisymmetric porous radiant burner, Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) (2017)
  1. Patro P., Rout A., Satyanarayana K., (2016), “CFD simulation for gas and micro-particles suspension in a pipe” Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP), December 15-17, 2016, MNNITA, Allahabad, U.P., India.
  2. Rout A., Majumder S., Saha D., Mandal A., (2016), “Study of laminar flow in a square duct with injection from a porous wall, Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP), December 15-17, 2016, MNNITA, Allahabad, U.P., India.
  3. Harichandan, A. B., Pande, S. S., & Sheth, M. M. (2016). CFD modeling of fuel reactor for a chemical looping combustion process. 9th International Conference on Engineering and Business Education and 6th International Conference on Innovation and Entrepreneurship. February 24-26, Gujarat, Ahmadabad, India.
  4. Harichandan, A. B., Sonarkar, P. C., & Sheth, M. M. (2016). A novel method for converting complete DTM raster data to Ansys WorkBench. 9th International Conference on Engineering and Business Education and 6th International Conference on Innovation and Entrepreneurship, February 24-26, Gujarat, Ahmadabad, India.
  5. Harichandan, A. B., & Sheth, M. M. (2016). Low Reynolds number flow past Eppler Airfoil. 1st International Conference on Automation in Industries. April 5-6, Junagad, Gujarat, India.
  6. Behera, R., Sankar, M. R. (2016) Laser Surface Cladding of Titania-Hydroxyapatite Functionally Graded Bio-coatings on Ti-6Al-4V Alloy, In proceeding of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016 at College of Engineering., Pune, Maharashtra, INDIA.
  7. Mohapatra, S. K., & Maity, K. P. (2016, February). Parametric optimization of simulated extrusion of square to square section through linear converging die. In IOP Conference Series: Materials Science and Engineering (Vol. 115, No. 1, p. 012031). IOP Publishing.
  8. ICEMS 2016, Jaipur National University, March 17-19 2016, Jaipur, Rajasthan
  9. Guha, S.,  Banerjee,T.,   Bandyopadhyay, A.,  Das, S., (2016) An investigation on slab milling operation to find out optimum cutting parameters. CAD/CAM, Robotics and Factories of the Future, Lecture Notes in Mechanical Engineering, 345-356.
  10. Chaudhuri, S., Das, P.K. (2016). Belt-driven transport of Sisko fluid-a critical test case for the application of Homotopy perturbation method.Proceedings of the 6th International and 43rd National conference on Fluid Mechanics and Fluid Power, MNNITA, Allahabad, India.
  11. Sahoo, S., Modi, A., Chaudhuri, S. (2016). Pressure driven flow of a third grade fluid through a narrow channel with viscous dissipation. Proceedings of the  6th International and 43rd National Conference on Fluid Mechanics and Fluid Power ( FMFP-2016), MNNIT Allahabad, India.
  12. Lahiry, A., Datta, A., & Tripathy, S. (2016). Active and entire candidate sector channel utilization based close loop antenna array amplitude control technique for UMTS and CDMA networks to counter non uniform cell breathing. In Intelligent Systems Technologies and Applications (pp. 33-44). Springer, Cham.
  1. Rout A., Patro P.,(2015), “Numerical analysis for laminar fluid flow and heat transfer in a bend pipe” Proceedings of the Forty Second National Conference on Fluid Mechanics and Fluid Power (FMFP), December 14-16, 2015, NITK Surathkal, Karnataka, India.
  2. Behera, A., Behera, A., Mishra, S. C., Pani, S., & Parida, P. (2015). Air jet erosion test on plasma sprayed surface by varying erodent impingement pressure and impingement angle. IOP Conference Series: Materials Science and Engineering, 75(1). https://doi.org/10.1088/1757-899X/75/1/012004
  3. Behera, A., Aich, S., Behera, A., & Sahu, A. (2015). Processing and Characterization of Magnetron Sputtered Ni/Ti Thin Film and their Annealing Behaviour to Induce Shape Memory Effect. Materials Today: Proceedings, 2(4–5), 1183–1192. https://doi.org/10.1016/j.matpr.2015.07.030
  4. Sahu, S. K., Pal, K., & Routara, B. C. (2015). Effects of pin geometry on friction stir Cuto Alalloy lap joint. In Materials Today: Proceedings (Vol. 2). https://doi.org/10.1016/j.matpr.2015.07.309
  5. Parida, A. K., Routara, B. C., & Bhuyan, R. K. (2015). Surface roughness model and parametric optimization in machining of GFRP composite: Taguchi and Response surface methodology approach. In Materials Today: Proceedings (Vol. 2). https://doi.org/10.1016/j.matpr.2015.07.247
  6. Nayak, B. B., Mahapatra, S. S., Chatterjee, S., & Abhishek, K. (2015). Parametric Appraisal of WEDM using Harmony Search Algorithm. Materials Today: Proceedings, 2(4–5), 2562–2568. https://doi.org/10.1016/j.matpr.2015.07.207
  7. Kasi, K. Mohanta, A. Mandal, S.K. Singh, K. Jayshankar,” Synthesis of Fe-TiC composite by thermal plasma reduction of ilmenite slag” BTTD, NML Jamshedpur, April 9-10 (2015)
  8. Bej, Nilotpala,. Sinhamahapatra, K. P. (2015). CFD study on the effects of viscous shear in a hot cascade Ranqu-Hilsch vortex tube. Cryogenic Engineering Conference and International Cryogenic Materials Conference, Arizona, USA.
  9. Behera, R. R., & Sankar, M. R. (2015). State of the art on under liquid laser beam machining. Materials today: proceedings, 2(4-5), 1731-1740.
  10. Hotta, S. K., Singh, R., Sahoo, N., Mohanty K., Mahanta, P., “Design of a venture type biogas mixer for a four stroke spark ignition engine,” 5th International Conference on Advances in Energy Research, Dec10-12, 2015, 998-1005, IIT Bombay, India.
  11. Chakrabarty, S. Narula, H., Bhargava, M., Pant, P. & Mishra, S.K.  (2015).‘Development of materials  model based on microstructure evolution for formability analysis of low-Ni austenitic stainless steel’, IOP Conference Series: Materials Science and Engineering, Volume 82, 17th International Conference on Textures of Materials (ICOTOM 17) 24–29 August 2014, Dresden, Germany, IOP conference series Materials Science and Engineering 82. 012017
  12. Bhargava, M., Chakrabarty. S., Tiwari, A. & Mishra, S. K. (2015).‘Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels’, IOP Conference Series: Materials Science and Engineering, Volume 82, 17th International Conference on Textures of Materials (ICOTOM 17) 24–29 August 2014, Dresden, Germany, IOP conference series Materials Science and Engineering 82.  012067
  13. Pradhan, S., Saquib, M., & Singh, I. (2015, November). Forced steering control with estimated wheel wear (Vehicles-Rail/Wheel). In The Proceedings of International Symposium on Seed-up and Service Technology for Railway and Maglev Systems: STECH 2015 (pp. _1F32-1_). The Japan Society of Mechanical Engineers.
  14.  P.Mohapatra, S.Nanda,T.Adhikari and S.Tripathy (2015),” Application of Fuzzy-ANP Model for Performance Measurement of Supply Chain Management” International Journal of Research in Mechanical Engineering & Technology, Vol 5. Issue 2, PP 07-10
  15. M.S.Khan, A.Saikia and S.Tripathy (2015),” Prediction of Petroleum Price in India” International Journal of Research in Mechanical Engineering & Technology, Vol 5. Issue 2, PP 11-16
  16. S.Dash, R.Mishra and S.Tripathy (2015),” Time Study is a Crucial Factor for Enhancing the Productivity in Manufacturing Organization: A Case Study in ABC Industry” International Journal of Research in Mechanical Engineering & Technology, Vol 5. Issue 2, PP 17-21
  17. S.Swain, S.Jaypuria, T.R.Mahapatra and S.Tripathy (2015),” Significance of the Critical Success Factors for Quality Development in Technical Education: A Case Study in Odisha” International Journal of Research in Mechanical Engineering & Technology, Vol 5. Issue 2, PP 22-27
  1. Nayak, B. B., & Mahapatra, S. S. (2014a). A hybrid approach for process optimization in taper cutting operation using wire electrical discharge machining. Applied Mechanics and Materials, 619, 83–88. https://doi.org/10.4028/www.scientific.net/AMM.619.83
  2. Nayak, B. B., & Mahapatra, S. S. (2014b). A utility concept approach for multi-objective optimization of taper cutting operation using WEDM. Procedia Engineering, 97, 469–478. https://doi.org/10.1016/j.proeng.2014.12.271
  3. Das D*, Sahoo AK, Das R and Routara BC, Investigations on Hard Turning Using Coated Carbide Insert: Grey based Taguchi and Regression Methodology. Procedia Materials Science 6 (2014) 1351-1358. Elsevier, DOI: 10.1016/j.mspro.2014.07.114
  4. Kasi, K. Mohanta, A. Mandal, S.K. Singh, K. Jayshankar,”Metallograph of Fe-TiC composite synthesized in an open bath thermal plasma reactor” 4th National Conference on Processing and Characterization of materials (NCPCM 2014), Dec 5-6 (2014)
  5. B. Sahu, A. K. Rout, R. Kumar, Natural Convection of Air around a Heated Circular Cylinder inside a Square Cavity, All India Seminar on Recent Advances in Thermal Engineering, 2014, Institute of Engineers, Odisha Center, Bhubaneswar, India.
  6. Bej, Nilotpala,. Sinhamahapatra, K. P. (2014). Thermodynamics study on a counter flow Ranque-Hilsch vortex tube using turbulence model,. 6th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, India.
  7. Ghose, Akhilesh K. Dewangan, Pratik Mitra, A.K.Rout, (2014) Experimental study of aero foil with wind tunnel setup inn all India seminar on recent advances in thermal engineering, Institute of engineers, Bhubaneswar.
  8. “Behera, R., Sankar, M. R., Kumar, I., Sharma, A. K., Khare, A., & Swaminathan, J. (2014) Experimental Study on Micromachining of 304 Stainless Steel Under Water Using Pulsed Nd: YAG Laser Beam, In proceeding of 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT
  9. Guwahati, Assam, India”
  10. “Ghadai, R. K., Behera, R. R., & Mondal, S. C. (2014) Modeling Electrical Discharge Machining Process Using Artificial Neural Network for the Machining of Special Steel WP7V, In proceeding of 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IIT
  11. Guwahati, Assam, India”
  12. Nayak, S. K., Ghosh, D. P., Mishra, P. C., Ukamanal, M., and Chaini, R. (2014). Multiple Impinging Jet Arrays: An experimental investigation on fluid and heat flow. 5th Int. Conf. on Fluid Mechanics and Fluid Power, December 12-14, IIT Kanpur, India. Paper ID-FMFP14-B-707.
  13. Sahu S., Parhi D.R., Automatic design of fuzzy MF using Genetic Algorithm for fault detection in structural elements, IEEE Xplore, 2014, pp.1-5.
  14. Chaudhuri,S., Dutta, S., Patnaik, L.(2014). Study of two layer flow of Sisko fluids down an inclined plane, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power ( FMFP-2014), IIT Kanpur, Kanpur, India
  15. Lahiry, A., Tripathy, S., & Datta, A. (2014, April). W-CDMA busy hour handoff optimization using OMC-R controlled remote electronic variable tapered planar array. In 2014 International Conference on Communication and Signal Processing (pp. 031-035). IEEE.
  16. S.Tripathy, A.Samal, and S.Aich (2014), “Study of critical success factors of TQM in Indian small and medium scale enterprises”, International Journal of Management & Business Studies, Vol 4, Issue 2, PP 12-22
  17. S.Tripathy, S.Jaypuria, and S.Aich (2014), “Performance Measurement of Supply Chain is a Key Driver for Organizational Growth: A Case at HEC, Ranchi” International Journal of Management & Business Studies, Vol 4, Issue 3, PP 37-42
  18. S.Tripathy, S.Aich,, and A.R. Kumar (2014), “Involvement of supplier is a vaccine to enhance new product development performance”, International Journal of Management & Business Studies, Vol 4, Issue 3, PP 22-27
  19. S.Tripathy, S.Sinha, P.Chakraborty, and P.Das (2014),” Effective mentoring leading towards higher educational productivity:A case at KIIT university” International Journal of Research in Mechanical Engineering & Technology, Vol 4. Issue 2, PP 23-31
  20. S.Tripathy, R.Sahoo,, and J.Patnaik (2014), “Waste minimization in health sector: An ahp approach” International Journal of Research in Mechanical Engineering & Technology, Vol 4. Issue 2, PP 7-11
  21. S.Tripathy, (2014), “STOP Approaches of Green Issues in Indian Mining Industries Towards Sustainability Development: A Critical Future Issue” International Journal of Research in Mechanical Engineering & Technology, Vol 5. Issue 1, PP 7-9
  22. S.Tripathy, S.Nayak (2014), “A critical study of issues pertaining to Fatigue & Alertness of Crew in Rail transport System through analysis of data of Vigilance Control Device installed in the locomotive” International Journal of Research in Mechanical Engineering & Technology, Vol 5. Issue 1, PP 43-48
  23. S.Tripathy, B.Patra, R.Karan, B.Panda (2014), “Performance Of Environmental Critical Factors In Building Construction Projects” International Journal of Education and Applied Research, Vol 4. Issue 2, PP 19-22
  24. S.Tripathy, P.Mahapatra (2014), “The Determinants of Growth Barriers and Influential Growth Of Indian Non-Life Insurance Industries” International Journal of Management & Business Studies, Vol 4, Issue 4, PP 15-20
  1. Rout A., Majumder S., Saha D., Mandal A.,(2013) “Numerical analysis and heat transfer of laminar fluid flow through a square duct with injections from wall, Proceedings of the Fortieth National Conference on Fluid Mechanics and Fluid Power  (FMFP), December 12-14, 2013, NIT Hamirpur.
  2. Harichandan, A. B., & Shamim, T. (2013). Effect of fuel and oxygen carriers on the hydrodynamics of fuel reactor in a chemical looping combustion system. Proceedings of the Summer Heat Transfer Conference. July 14-19, Minneapolis, Minnesota, USA.
  3. Harichandan, A. B., & Shamim, T. (2013). Numerical simulation of fuel reactor for a hydrogen-fueled chemical looping combustion process. Proceedings of the 9th Asia-Pacific Conference on Combustion. May 19-22, Gyeongju Hilton, Gyeongju, Korea.
  4. Rana, B. K., Dalal, A., & Biswas, G. (2013, July). Flow and Heat Transfer From the Annular Fin Heat Exchanger Using Winglet Type Vortex Generators. In Heat Transfer Summer Conference (Vol. 55485, p. V002T04A005). American Society of Mechanical Engineers.
  5. Bej, Nilotpala,. Sinhamahapatra, K. P. (2013). Exergy analysis and CFD study of counter flow Ranque-Hilsch vortex tube using turbulence models. 11th International ISHMT-Mass Transfer Conference,IIT Kharagpur, India.
  6. Bej, Nilotpala,. Sinhamahapatra, K. P. (2013). CFD study on the effects of nozzles number on turbulent flow and energy separation in a Ranque Hilsch vortex tube. 4th International Conference on Mechanical and Manufacturing Engineering, Malaysia.
  7. Nalam Yogesh, Prakash Ghose, IshamPanigrahi, (2013),FSAE intake air restrictor design on 2nd KITSAAT International symposium, KIIT University Bhubaneswar.
  8. Sankar, M. R., Sakya T. K., Behera, R. R.,  (2013). Experimental Study on CO2 Laser Beam Micromachining of Silicon Carbide (SiC) Cylindrical Tube, In Proceeding of International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING (COPEN-8: 2013) December 13th-15th, 2013, NIT Calicut, Kerala, India
  9. Mahanta P., Hotta S. K. and Pati J. R. (2013), “Studies On Heat Transfer And Drying Characteristics Of Ginger In A Natural Convection Dryer”, Proceedings of the 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference December 28-31, 2013, IIT Kharagpur, India
  10.  Mishra, P. C., Nayak, S. K., Ghosh, D. P., Ukamanal, M., Nayak, S. K., Sahu, S. K. (2013). Enhancement of Heat Transfer from Hot Metal Surface by Impingement of Array of Jets. Int. ISHMT-ASME Heat and Mass Transfer Conf., December 28-31, IIT Kharagpur, India. Paper ID-HMTC1300075.
  11. Mishra, P.C., Nayak, S.K., Ghosh, D. P., Chaini, R., Bal, S. (2013). Heat Transfer Augmentation in Steel Quenching by Spray Impingement Cooling Method (SICM) – An Experimental Investigation. Int. ISHMT-ASME Heat and Mass Transfer Conf., December 28-31, IIT Kharagpur, India. Paper ID-HMTC1300526.
  12. Mishra, P.C., Nayak, S.K., Mitra, P., Mukharjee, S., and Paria, S. (2013) Application and future of Nanofluids in automobiles: An Overview on Current Research. 2nd KIIT Int. Sympo. on Advances in Automotive Technology, 164-166.
  13. Sahu S., Parhi D.R., Automatic Design of Fuzzy MF using Genetic Algorithm for Damage Detection in Structural elements, Proceedings of IRAM-2013(Emerald), 2013, pp.332-337
  14. Verma, A.K., Kar, S.P., Rath, P., Mahapatra, S.K. (2013) Divergence of radiative heat flux in ultra-short time scale in axisymmetric geometry with its implications  ASME 2013 4th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2013.
  15. Chaudhuri, S., Das, P.K.(2013). Analysis of flow of magnetic fluid in a wavy channel”, Proceedings of the 22nd National and 11 th ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur, India
  16. Pattnaik, B., & Tripathy, S. (2013, December). A computational geometric approach for a novel multivariate process capability index. In 2013 IEEE International Conference on Industrial Engineering and Engineering Management (pp. 1031-1035). IEEE.
  1. Sahoo AK*, Das D, Mohanty T, Rout AK and Routara BC (2012) Surface roughness prediction model and optimization of process parameter in turning using Taguchi DOE and regression analysis, Proceedings of 1st International Conference on Material Processing and Characterization (ICMPC-2012), 8th to 10th March 2012, GRIET, Hyderabad.
  2. Sahoo AK*, Orra K, Das D, Mohanty T, Rout AK and Routara BC, The investigation on the prediction of flank wear in hard turning with TiN coated mixed ceramic insert based on the response surface methodology, Proceedings of 4th International & 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2012), 14th to 16th December 2012, Jadavpur University, Kolkata.
  3. Ghose, P. Nanda, A. Mohanty, K. B. Sahu, Numerical Simulation of One Dimensional Phase Change Problem with Variable Properties Subjected to Radiation and Convection at the Boundary, National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, 2012, KIIT University, Bhubaneswar, India.
  4. Bej, Nilotpala,. Sinhamahapatra, K. P. (2012). CFD analysis of the energy separation in a Ranque-Hilsch vortex tube (RHVT). 14th Annual CFD Symposium, NAL, Bangalora, India.
  5. Prakash Ghose, P. Nanda , A. Mohanty, K. B. Sahu “NUMERICAL SIMULATION OF ONE DIMENSIONAL PHASE CHANGE PROBLEM WITH VARIABLE PROPERTIES SUBJECTED TO RADIATION AND CONVECTION AT THE BOUNDARY” National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, 2012 KIIT University, Bhubaneswar.
  6. Prakash Ghose, A. Datta, A. Mukhopadhyay, R. Ganguly, S. Sen (2012)“ Comparison of Cold flow analysis in a swirled dump combustor with standard k-ε and RNG k-ε turbulent models”, National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, KIIT University, Bhubaneswar.
  7. Kunja Bihari Sahu, Prakash Ghose, Purna Chandra Mishra, (2012)“ANALYSIS OF COMBINED CONDUCTION AND RADIATION IN PARTICIPATING MEDIUM WITHIN TWO-DIMENSIONAL RECTANGULAR ENCLOSURES”, 9th International Conference on Mechanical Engineering, 2011 (BUET, Dhaka, Bangladesh).
  8. Roy, S., Lingertat, H., Sarin, V., Brecher, C., Fabrication of translucent anisotropic monoclinic lutetium oxyorthosilicate ceramics, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012, 2012, 1, pp. 212–220