Research Groups
Research Labs
Central Research Labs
Publications
Projects
Consultancy
Patents
Statistics

Journal Publications

  1. Mahapatra, A. S.; Kar, S. P. & Swain, .(2023) A. Effect of surfactant on saturated pool boiling over porous coated surface Journal of Enhanced Heat Transfer,30, 1-14
  2. Sukumar, S., & Kar, S. P. (2023). Numerical investigation of a novel method of laser assisted cryopreservation of biological tissue considering non-fourier heat conduction. Lasers in Medical Science, 38(1), 98.
  3. Mukherjee, S., Wciślik, S., Khadanga, V., & Mishra, P. C. (2023). Influence of nanofluids on the thermal performance and entropy generation of varied geometry microchannel heat sink. Case Studies in Thermal Engineering, 49, 103241.
  4. Ramteke, P. M., Sharma, N., Dwivedi, M., Das, S. K., Uttarwar, C. R., & Panda, S. K. (2023, August). Theoretical thermoelastic frequency prediction of multi (uni/bi) directional graded porous panels and experimental verification. In Structures (Vol. 54, pp. 618-630). Elsevier.
  5. Kumar, P., Arya, R., Sharma, N., Hirwani, C. K., & Panda, S. K. (2023). Curved Fiber-Reinforced Laminated Composite Panel and Variable Stiffness Influence on Eigenfrequency Responses: A Higher-Order FE Approach. Journal of Vibration Engineering & Technologies, 1-11.
  6. Sahu, S., & Jena, S. P. (2023). Application of Hybrid Fuzzy Technique for Damage Estimation in Structural Member. JJMIE, 17(2).
  7. Tripathy, S., Sahoo, D., Roy, S., & Pati, S. (2023). Effect of Substrate Heating on Corrosion Behavior of Nickel Coated on AISI 1020 Steel by Cold Gas Dynamic Spraying. Journal of Materials Engineering and Performance, 32(12), 5346-5352.
  8. Mukherjee, S., Panda, S. R., Mishra, P. C., Sen, S., & Chaudhuri, P. (2023). Thermophysical and transient heat transfer characteristics of aqueous SiO2 nanofluid in energy management applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237(3), 1100-1111.
  9. Al Awadh, M., Kumar, R., İynen, O., Rafighi, M., Özdemir, M., & Pandey, A. (2023). Machinability Comparison of TiCN-Al2O3-TiN, TiAlN-TiN, and TiAlSiN Coated Carbide Inserts in Turning Hardened AISI 4340 Steel Using Grey-Crow Search Hybrid Optimization. Metals, 13(5), 973.
  10. Sharma, N., Mohapatra, S., Kumar, E. K., & Panda, S. K. (2023). Geometrically Nonlinear Aeroelastic Flutter Characteristic of Laminated Composite Shell Panels Under Supersonic Flow. International Journal of Applied Mechanics, 15(04), 2350029.
  11. Sinha, G. S., Kumar Mishra, N., Muthukumar, P., & Sharma, M. (2023). Thermal performance and emission analysis of self-aspirated kerosene pressure stove with porous radiant burner using kerosene nanofuels. International Journal of Environmental Science and Technology, 20(5), 4851-4860.
  12. Verma, A., Tripathy, S., & Singhal, D. (2023). The significance of warehouse management in supply chain: An ISM approach. Decision Making: Applications in Management and Engineering, 6(1), 92-110.
  13. Dewangan, H. C., Panda, S. K., Sharma, N., Mahmoud, S. R., Harursampath, D., & Mahesh, V. (2023). Thermo-mechanical large deformation characteristics of cutout borne multilayered curved structure: Numerical prediction and experimental validation. International Journal of Non-Linear Mechanics, 150, 104345.
  14. Sahoo, B., Mehar, K., Sahoo, B., Sharma, N., & Panda, S. K. (2021). Thermal post-buckling analysis of graded sandwich curved structures under variable thermal loadings. Engineering with Computers, 1-17.
  15. Rajan, K. M., Kumar Sahoo, A., Routara, B. C., Panda, A., & Kumar, R. (2023). Machinability Studies of Wrought Titanium Alloy Ti-6Al-4V Based on Orthogonal Array Design. Surface Review and Letters, 30(03), 2350014.
  16. Kumar Jena, S., & Singhal, D. (2023). Optimizing the competitive sustainable process and pricing decision of digital supply chain:: A power-balance perspective.
  17. Prasad, A. O., Mishra, P., Jain, U., Pandey, A., Sinha, A., Yadav, A. S., … & Dixit, A. K. (2023). Design and development of software stack of an autonomous vehicle using robot operating system. Robotics and Autonomous Systems, 161, 104340.
  18. Bag, R., Panda, A., Sahoo, A. K., & Kumar, R. (2023). Sustainable high-speed hard machining of AISI 4340 steel under dry environment. Arabian Journal for Science and Engineering, 48(3), 3073-3096.
  19. Edelbi, A., Kumar, R., Sahoo, A. K., & Pandey, A. (2023). Comparative machining performance investigation of dual-nozzle MQL-assisted ZnO and Al2O3 nanofluids in face milling of Ti–3Al–2.5 V alloys. Arabian Journal for Science and Engineering, 48(3), 2969-2993.
  20. Rana, B. K., & Senapati, J. R. (2023). Natural convection from an isothermally heated hollow vertical cylinder submerged in quiescent power-law fluids. Journal of Thermal Science and Engineering Applications, 15(2), 021003.
  21. Sahoo, B. P., Das, D., Rath, P., Chakrabarty, S., Roy, S., & Mohanta, K. (2023). Improving reinforcement properties of CNTs in aluminium matrix composites: a case of surface modification through AlN nano-particle grafting. Surfaces and Interfaces, 36, 102571.
  22. Panda, S. K., & Rana, B. K. (2023). Gaseous Entrainment Dynamics in a Viscous Pool Due to Combined Influence of Asymmetric Rotational Field and Crossflow of Air. Journal of Fluids Engineering, 145(2), 021401.
  23. Panda, S. K., & Rana, B. K. (2023). Behavior of Gas Entrainment Inside Viscous Pool Due to Combined Influence of Symmetric Rotational Field and Freestream Flow of Air. Journal of Fluids Engineering, 145(2), 021402.
  24. Km, R., Sahoo, A. K., Routara, B. C., Panda, A., & Kumar, R. (2023). Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 865-885.
  25. Mishra, D., & Satapathy, S. (2023). Reliability and maintenance of agricultural machinery by MCDM approach. International Journal of System Assurance Engineering and Management, 14(1), 135-146.
  26. Bhanu Teja, N., Devarajan, Y., Mishra, R., Sivasaravanan, S., & Thanikaivel Murugan, D. (2021). Detailed analysis on sterculia foetida kernel oil as renewable fuel in compression ignition engine. Biomass Conversion and Biorefinery, 1-12.
  27. Hemanandh, J., Devarajan, Y., Mishra, R., & Meenakshisundaram, N. (2021). Experimental investigation on slaughter, fish waste and poultry excrete oil as fuel blends in diesel engine. Biomass Conversion and Biorefinery, 1-9.
  28. Panda, S. K., & Rana, B. K. (2023). Characterization of Air Entrainment Using a Pair of Vertically Aligned Revolving Rollers. Industrial & Engineering Chemistry Research, 62(2), 998-1015.
  29. Mahanta, T., Das, S., Pattanaik, A., & Satpathy, M. P. (2023). Ultrasonic spot welding of dissimilar Al/SS sheets with various surface conditions: an experimental investigation. Materials and Manufacturing Processes, 1-11.
  30. Naik, P., Pradhan, S., Sahoo, P., & Acharya, S. K. (2023). Abrasive Wear Behavior of Natural Carbon Black Reinforced Polymer Composites. Composites: Mechanics, Computations, Applications: An International Journal.
  31. Ansari, M. M. A., Sahu, K. B., Chaudhuri, S., Srikanth, J., Sahu, D., & Mishra, V. K. (2023). Hybrid genetic algorithm-self organizing map network for decision support system: An application in combined mode conduction-radiation heat transfer in porous medium. Numerical Heat Transfer, Part B: Fundamentals, 1-23.
  32. Dash, S., Mahapatra, T. R., Mehar, K., Panigrahi, I., & Mishra, D. (2023). Finite element analysis of thermoelastic free vibration behaviour of hardcore higher-order doubly curved sandwich shell panel. International Journal of Structural Engineering, 13(1), 80-108.
  33. Mohapatra, B., Rajpal, A., Tarasia, A., Singhal, D., & Tripathy, S. (2023). Role of Industry 4.0 in manufacturing: an exhaustive literature review and future prospects. International Journal of Process Management and Benchmarking, 14(2), 176-217.
  34. Mohanty, R. L., Chaudhuri, S., Chakraborty, P., Mishra, V. K., Sahu, K. B., & Das, B. Assessment of heat transfer in large parallel plates with a narrow gap maintained at a constant temperature. Heat Transfer.
  35. Mahapatra, A. S., Kar, S. P., & Swain, A. (2023). Effect of surfactant on saturated pool boiling over porous coated surface. Journal of Enhanced Heat Transfer, 30(1).
  36. Nayak, S., Mohapatra, J., Muduli, K., Khuntia, S. K., Malla, C., Patra, S. K., … & Jena, P. K. (2023). Mechanical and thermal properties of Careya arborea bast fiber–reinforced chitosan composites for packaging industries. Biomass Conversion and Biorefinery, 1-8.
  37. Maity, R., Mishra, R., & Pattnaik, P. K. (2023). Flying robot path planning techniques and its trends. Materials Today: Proceedings, 80, 2187-2192.
  38. Pradhan, P., Purohit, A., Mohanty, I., Jena, H., & Sahoo, B. B. (2023). Erosion wear analysis of coconut shell dust filled epoxy composites using computational fluid dynamics and Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062231167674.
  39. Jena, T. K., Rana, B. K., Patel, J. K., Ghose, P., & Nayak, S. K. (2023). Effect of annular gap between isothermally heated co-axial cylinders on heat transfer. Materials Today: Proceedings.
  40. Pradhan, R. C., Das, D., Sahoo, B. P., Rout, C., Panda, A., & Barla, E. (2023). MACHINING INVESTIGATIONS OF SQUEEZE CAST TIB 2/AL 7075 COMPOSITES THROUGH EDM: REGRESSION MODELLING AND WEIGHTED PRINCIPAL COMPONENT ANALYSIS. Archives of Metallurgy & Materials, 68(2).
  41. Nayak, K., Singhal, D., Tripathy, S., & Mohapatra, B. (2023). Evaluation of key enablers of green supply chain management in Indian manufacturing industries: a fuzzy approach. International Journal of Services and Operations Management, 44(1), 62-92.
  42. Mallick, R., Kumar, R., Panda, A., & Sahoo, A. K. (2023). Hard turning performance investigation of AISI D2 steel under a dual nozzle MQL environment. Lubricants, 11(1), 16.
  43. Raviteja, T., Surekha, B., & Sharma, N. (2023). Influence of Cu and Al interfacing foil on Al7075/A360 FGMs fabricated by gravity casting. Materials Today: Proceedings, 74, 1052-1056.
  44. Dash, A., Joshi, K. K., Jha, P., Behera, A., & Mohapatra, S. K. (2023). Various plate theory used in the analysis of FGMs-A review. Materials Today: Proceedings, 78, 565-569.
  45. Jha, P., Mohapatra, S. K., Behera, A., Joshi, K. K., Hasan, M. E., & Sinha, D. K. (2023). A brief review of processing techniques for NiAl intermetallic composites. Materials Today: Proceedings, 78, 560-564.
  46. Pandey, A. K., Kumar, A., Tripathi, J. P., & Hasan, M. E. (2023). Analysis of a high speed low-torque variable displacement hydro-motor efficiency at different displacement conditions. Materials Today: Proceedings, 79, 247-249.
  47. Roy, S., Kumar, R., Satpathy, A., & Sahoo, A. K. (2023). Current status of various coolant applications in machining of nickel-base superalloys. Materials Today: Proceedings, 78, 535-542.
  48. Banerjee, D., Mohanty, O., Mallik, D., Nanda, B. K., & Mishra, S. B. (2023). Mathematical investigation on circularity error of FDM built parts. Materials Today: Proceedings, 74, 788-794.
  49. Phani, K. V. S., Nanda, B. K., Mishra, S. B., & Nayak, S. K. (2023). Structural analysis of experimentally fabricated glass fiber reinforced (GFRP) composites. Materials Today: Proceedings, 74, 889-894.
  50. Nayak, S. K., Nanda, B. K., Mishra, S. B., Behera, S. P., Mishra, R., & Nayak, S. (2023). Impingement cooling of hot metallic surface by change of fluids: An experimental investigation. Materials Today: Proceedings, 78, 508-513.
  51. Naik, P., Pradhan, S., Sahoo, P., & Acharya, S. K. (2023). Effect of Environment on Mechanical Behavior of Thermosetting Composites Reinforced with Bio-Filler (Orange Peel Particulate) Materials, Biointerface Res. Appl. Chem, 13(4).
  52. Deheri, C., Acharya, S. K., & Mishra, R. (2023). Effect of initial pH and substrate to inoculum ratio on the production of methane and hydrogen from food waste. Materials Today: Proceedings, 74, 650-654.
  53. Behera, R. K., Parida, S. K., & Das, R. R. (2023). Effect of using fibre reinforced epoxy adhesive on the strength of the adhesively bonded Single Lap Joints. Composites Part B: Engineering, 248, 110358.
  54. Surekha, B., Mahapatra, M. M., & Samal, P. (2023). Characterization of AZ91D/Al7075 FGMs fabricated through gravity casting: effect of Zn interface. Materials Research Innovations, 27(4), 233-242.
  55. Jena, H., Panigrahi, A., & Jena, M. (2023). Mechanical property of jute fibre reinforced polymer composite filled with clam shell filler: A marine waste. Advances in Materials and Processing Technologies, 9(1), 75-91.
  56. Ghose, P., Sahoo, T. K., & Sahu, A. K. (2023). Pulverized coal combustion computational modeling approach: A review. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 237(4), 797-818.
  57. Patel, S. S., Kumar, E. K., Panda, S. K., & Sharma, N. (2023). State of Art Review on Computational Modelling and Analysis and Making of Brain Phantom. Archives of Computational Methods in Engineering, 30(4), 2527-2541.
  58. Bhagat, R. N., Sahu, K. B., Ghadai, S. K., & Kumar, C. B. (2023). A review of performance and emissions of diesel engine operating on dual fuel mode with hydrogen as gaseous fuel. International Journal of Hydrogen Energy.
  59. Anusha, K., Routara, B. C., & Guha, S. (2023). A Review on High-Velocity Oxy-Fuel (HVOF) Coating Technique. Journal of The Institution of Engineers (India): Series D, 1-18.
  60. Dewangan, H. C., Panda, S. K., & Sharma, N. (2023). A Review of Linear and Nonlinear Structural Responses Laminated Composite Flat/Curved Panels with and without Cutout under Thermo-Mechanical Loading. Composite Structures, 116340.
  61. Kumar, V., Kumar, E. K., Dewangan, H. C., Sharma, N., Panda, S. K., & Mahmoud, S. R. (2023). Strain rate loading effects on fiber-reinforced polymeric composites with and without damage: a comprehensive review. Transactions of the Indian Institute of Metals, 76(1), 1-10.
  1. Mahapatra AS, Kar SP,  Swain A, (2022),Effect of surfactant on saturated pool boiling over porous coated surface, Journal of Enhanced Heat Transfer 30 (1)
  2. Mahapatra AS, Kar SP,  Swain A, (2022) Experimental analysis of saturated pool boiling of acetone and isopropanol with added surfactant sodium lauryl sulfate over aluminum surface
  3. Sarangi RK, Swain A, Kar SP, Sekhar PC, (2022)Modeling for liquid plug oscillation frequency and amplitude of Pulsating heat pipe,Materials Today: Proceedings 49, 372-377
  4. Acharya, A., Jain, S., Rout, A. K., “ The horizon for enhancing the efficiency and reducing environmental impinge of IC engines,’’ published in AIP conference proceedings, 2463, 2022, 020052.
  5. Parimanik, S.R., Mahapatra, T. R., Mishra, D., Rout, A. K.,” Optimisation of performance characteristics in laser welding of Nitinol wires using Taguchi and grey relation analysis,” Published in Advances in Materials and processing Technologies, 2022.
  6. Arya, M., Kumar Rout, A. & Samanta, S., “A review on the effect of engine performance and emission characteristics of CI engine using Diesel-Biodiesel-Additives fuel blend,” published in Materials Today: proceedings, 51, 2022, pp. 2224-2232.
  7. Bag, R., Panda, A., Sahoo, A. K., & Kumar, R. (2022). Sustainable High-Speed Hard Machining of AISI 4340 Steel Under Dry Environment. Arabian Journal for Science and Engineering, 1-24.
  8. Panigrahi, R. R., Panda, A., Sahoo, A. K., Kumar, R., & Mishra, R. R. (2022). Turning performance analysis and optimization of processing parameters using GRA-PSO approach in sustainable manufacturing. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221093309.
  9. Sahoo, A.K.,Kumar, R., Panda, A., Mishra P. C. & Mohanty T. (2022) Assessment of sustainable dry and MQL-assisted hard machining using MTCVD multilayered coated carbide (TiN/TiCN/Al2O3) insert, Canadian Metallurgical Quarterly, DOI: 10.1080/00084433.2022.2126579
  10. Soren, T. R., Kumar, R., Pandey, A., Sahoo, A. K., Panigrahi, I., & Panda, A. (2022). Machinability Investigation of High-Strength 7068 Aluminum Alloy: a Potential Study Through Experimentation, Spotted Hyena Optimization and Advanced Modeling Approaches. Surface Review and Letters, 29(06), 2250081.
  11. Swain, S., Kumar, R., Panigrahi, I., Sahoo, A. K., & Panda, A. (2022). Machinability performance investigation in CNC turning of Ti-6Al-4V alloy: Dry versus Iron-aluminium oil coupled MQL machining comparison. International Journal of Lightweight Materials and Manufacture.
  12. Saha, P., Narain, R., Kumar, R., Singhal, D., Panda, A., Sahoo, A. K., & Das, D. (2022). Cryogenics as a cleaner cooling strategy for machining applications: A Concise Review. International Journal of Energy for a Clean Environment, 23(8).
  13. Swain, S., Panigrahi, I., Sahoo, A. K., Panda, A., & Kumar, R. (2022). An experimental investigation to augment the machinability characteristics during dry turning of Ti-6Al-4V alloy. Arabian Journal for Science and Engineering, 47(7), 8105-8127.
  14. Anurag, Kumar, R., Sahoo, A. K., & Panda, A. (2022). Comparative Performance Analysis of Coated Carbide Insert in Turning of Ti-6Al-4V ELI Grade Alloy under Dry, Minimum Quantity Lubrication and Spray Impingement Cooling Environments. Journal of Materials Engineering and Performance, 31(1), 709-732.
  15. Mallick, R., Kumar, R., Panda, A., & Sahoo, A. K. (2022). Hard turning performance evaluation using CVD and PVD coated carbide tools: A comparative study. Surface Review and Letters, 29(2), 2250020-1181.
  16. Mahapatra AS, Kar SP,  Swain A, (2022),Effect of surfactant on saturated pool boiling over porous coated surface, Journal of Enhanced Heat Transfer 30 (1)
  17. Mahapatra AS, Kar SP,  Swain A, (2022) Experimental analysis of saturated pool boiling of acetone and isopropanol with added surfactant sodium lauryl sulfate over aluminum surface
  18. Sarangi RK, Swain A, Kar SP, Sekhar PC, (2022)Modeling for liquid plug oscillation frequency and amplitude of Pulsating heat pipe,Materials Today: Proceedings 49, 372-377
  19. Rout, A. K., Nanda, S. R., Sahoo, N., Kalita, P., & Kulkarni, V. (2022). Soft Computing—A Way Ahead to Recover Heat Flux for Short Duration Experiments. Journal of Thermal Science and Engineering Applications, 14(3).
  20. Rout, A.K., Ranjan Nanda, S., Sahoo, N., Kalita, P., & Kulkarni, V. (2022). Implementation of Soft Computing Technique for Recovery of Impulsive Heat Loads. Journal of Thermophysics and Heat Transfer, 36(1), 108-117.
  21. Panwar, V. S., Pandey, A., & Hasan, M. (2022). Design and fabrication of a novel concept-based autonomous controlled solar powered four-wheeled Floor Cleaning Robot for wet and dry surfaces. International Journal of Information Technology, 14, 1995–2004.
  22. Mishra, P., Jain, U., Choudhury, S., Singh, S., Pandey, A., Sharma, A., … & Gehlot, A. (2022). Footstep planning of humanoid robot in ROS environment using Generative Adversarial Networks (GANs) deep learning. Robotics and Autonomous Systems, 104269.
  23. Kashyap, A. K., Pandey, A., & Parhi, D. R. (2022). Stabilized Walking of Humanoid NAO Using Enhanced Spring-Loaded Inverted Pendulum Model on Uneven Terrain. International Journal of Social Ecology and Sustainable Development (IJSESD), 13(1), 1-12.
  24. Suwarno, I., Oktaviani, W. A., Apriani, Y., Rijalusalam, D. U., & Pandey, A. (2022). Potential Force Algorithm with Kinematic Control as Path Planning for Disinfection Robot. Journal of Robotics and Control (JRC), 3(1), 107-114.
  25. Soren, T. R., Kumar, R., Pandey, A., Sahoo, A. K., Panigrahi, I., & Panda, A. (2022). Machinability Investigation of High-Strength 7068 Aluminum Alloy: a Potential Study Through Experimentation, Spotted Hyena Optimization and Advanced Modeling Approaches. Surface Review and Letters, 29(06), 2250081.
  26. Kumar, R., Pandey, A., Sahoo, A. K., & Rafighi, M. (2022). Investigation of Machinability Performance In Turning Of Ti–6al–4v Eli Alloy Using Firefly Algorithm And Grnn Approaches. Surface Review and Letters, 2250075.
  27. Kumar, R., Gour, S. S., Pandey, A., Kumar, S., Mohan, A., Shashwat, P., & Sahoo, A. K. (2022). Design and Analysis of a Novel Concept-Based Unmanned Aerial Vehicle with Ground Traversing Capability. acta mechanica et automatica, 16(3), 169-179.
  28. Yadav, D., Pandey, A., Mishra, D., Bagchi, T., Mahapatra, A., Chandrasekhar, P., & Kumar, A. (2022). IoT enabled smart dustbin with messaging alert system. International Journal of Information Technology, 1-9.
  29. Panwar, V. S., Pandey, A., & Hasan, M. E. (2022). E-puck motion control using multi-objective particle swarm optimization. Engineering Review, 42(1), 66-76.
  30. Edelbi, A., Kumar, R., Sahoo, A. K., & Pandey, A. (2022). Comparative Machining Performance Investigation of Dual-Nozzle MQL-Assisted ZnO and Al2O3 Nanofluids in Face Milling of Ti–3Al–2.5 V Alloys. Arabian Journal for Science and Engineering, 1-25.
  31. Kumar, K., Mishra, R., Singh, S., Kumar, A., & Pandey, A. (2022). Development of an autonomous vision sensor-actuator-based circumferential seam path tracker welding machine/device for LPG cylinders. Memories-Materials, Devices, Circuits and Systems, 2, 100009.
  32. Yadav, D., Pandey, A., Mishra, D., Bagchi, T., Mahapatra, A., Chandrasekhar, P., & Kumar, A. (2022). IoT enabled smart dustbin with messaging alert system. International Journal of Information Technology, 1-9.
  33. Kumar, K., Mishra, R., Singh, S., Kumar, A., & Pandey, A. (2022). Development of an autonomous vision sensor-actuator-based circumferential seam path tracker welding machine/device for LPG cylinders. Memories-Materials, Devices, Circuits and Systems, 2, 100009.
  34. Samal, S. K., Vishwanatha, H. M., Saxena, K. K., Behera, A., Nguyen, T. A., Behera, A., Prakash, C., Dixit, S., & Mohammed, K. A. (2022). 3D-Printed Satellite Brackets: Materials, Manufacturing and Applications. Crystals, 12(8), 1–22. https://doi.org/10.3390/cryst12081148
  35. Sinha, A., Swain, B., Behera, A., Mallick, P., Samal, S. K., Vishwanatha, H. M., & Behera, A. (2022). A Review on the Processing of Aero-Turbine Blade Using 3D Print Techniques. Journal of Manufacturing and Materials Processing, 6(1). https://doi.org/10.3390/jmmp6010016
  36. Das, B. N., Ukamanal, M., & Harichandan, A. B. (2022). Low Reynolds number flow past square cylinder in the vicinity of a plane wall. Incas Bulletin. DOI: 10.13111/2066-8201.2022.14.3.2
  37. Surekha, B., Mahapatra, M. M., & Samal, P. (2022). Characterization of AZ91D/Al7075 FGMs fabricated through gravity casting: effect of Zn interface. Materials Research Innovations, 1-10.
  38. Samal, P., Surekha, B., & Vundavilli, P. R. (2022). Experimental investigations on microstructure, mechanical behavior and tribological analysis of AA5154/SiC composites by stir casting. Silicon, 14(7), 3317-3328.
  39. Singh, A., Kumar, K., Sundari, K., Ranjan, R., & Surekha, B. (2022). Experimental investigations and multi criteria optimization during machining of A356/WC MMCs using EDM. Decision Science Letters, 11(2), 147-158.
  40. Surekha, B., Hanumantha Rao, D., Krishna Mohan Rao, G., Vundavilli, P. R., & Parappagoudar, M. B. (2022). Design and development of fuzzy logic-based expert system for forward and reverse mappings in resin bonded sand systems. International Journal of System Assurance Engineering and Management, 13(1), 439-449.
  41. Tarai, H., Samal, P., Vundavilli, P. R., & Surekha, B. (2022). Experimental study of microstructural and mechanical characterization of silicon-bronze copper alloy (C87600) hybrid composites reinforced with SiC-Gr particles by stir casting. Materials Today: Proceedings.
  42. Kar, C., & Surekha, B. (2022). Effect of red mud and TiC on friction and wear characteristics of Al 7075 metal matrix composites. Australian Journal of Mechanical Engineering, 20(1), 14-23.
  43. Rajan, K. M., Kumar Sahoo, A., Chandra Routara, B., & Kumar, R. (2022). Investigation on surface roughness, tool wear and cutting power in MQL turning of bio-medical Ti-6Al-4V ELI alloy with sustainability. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(4), 1452–1466. https://doi.org/10.1177/09544089211063712
  44. Kanaujia, N., Rahul, Behera, J. K., Kumar Mohapatra, S., Behera, A., Jha, P., … Chandra Routara, B. (2022). Process parameters optimization in CNC turning of aluminum 7075 alloy using TOPSIS method coupled with Taguchi philosophy. Materials Today: Proceedings, 56, 989–994. https://doi.org/10.1016/j.matpr.2022.03.226
  45. Panda, S. K., & Rana, B. K. (2022). Numerical Simulation and Analytical Prediction on the Development of Entrained Air Filament Caused by the Combined Effect of Rotational Field and Free Stream Flow. Industrial & Engineering Chemistry Research, 61(26), 9456-9473.
  46. Rana, B. K. (2022). Conjugate steady natural convection analysis around thick tapered vertical pipe suspended in the air. Sādhanā, 47(1), 1-16.
  47. Sahoo, P. C., Senapati, J. R., & Rana, B. K. (2022). Numerical observation and analytical formulation of droplet impact and spreading around the thin vertical cylinder. Physics of Fluids, 34(4), 042114.
  48. Rana, B. K. (2022). Numerical investigation on free convection from an isothermally heated hollow inclined cylinder suspended in air. Numerical Heat Transfer, Part A: Applications, 1-25.
  49. Panda, S. K., Rana, B. K., & Kumar, P. (2022). Entrainment in multifluid systems, and rotation induced occurrences. European Journal of Mechanics-B/Fluids.
  50. Vakacharla, B. K., & Rana, B. K. (2022). Free Convection Heat Transfer From a Spherical Shaped Open Cavity. ASME Journal of Heat Transfer, 144(9), 092601.
  51. Panda, S. K., & Rana, B. K. (2022). Rotational flux influenced cusp entrainment in a viscous pool. Physics of Fluids. (Accepted for Publication)
  52. Panda, S. K., & Rana, B. K. (2022). Gaseous entrainment dynamics in a viscous pool due to combined influence of asymmetric rotational field and crossflow of air. ASME Journal of Fluids Engineering. (Accepted for Publication)
  53. Rana, B. K., & Senapati, J. R. (2022). Natural convection from an isothermally heated hollow vertical cylinder submerged in quiescent power-law fluids. ASME Journal of Thermal Science and Engineering Applications. (Accepted for Publication)
  54. Alok P., Sahu D. (2022), Numerical analysis of a two-phase injection refrigeration cycle using R32, Journal of Thermal Engineering 8 (2), 157-168
  55. A Sarkar, D Sahu, D Das, SP Behera, SK Nayak, BK Mandal (2022), Effects of Ethanol as the Renewable fuel Blended with Gasoline on the Performance and Emission Characteristics of a Small Variable Compression Ratio Spark-Ignition Engine, International Journal of Energy for a Clean Environment
  56. D Sahu, SS Sahoo, PREFACE: INTERNATIONAL CONFERENCE ON THERMOFLUIDS AND MANUFACTURING SCIENCE− 2022, International Journal of Energy for a Clean Environment 23 (6)
  57. Vats, I., Singhal, D., Tripathy, S., & Jena, S. K. (2022). The transition from BS4 to BS6 compliant vehicles for eco-friendly mobility in India: An empirical study on switching intention. Research in Transportation Economics, 91, 101131.
  58. Mohapatra, B., Tripathy, S., Singhal, D., & Saha, R. (2022). Significance of digital technology in manufacturing sectors: Examination of key factors during COVID-19. Research in Transportation Economics, 93, 101134.
  59. Kuruvilla, A., Singhal, D., Tripathy, S., & Mohapatra, B. (2022). Challenges of sustainability in Indian manufacturing sector: a critical review. International Journal of Process Management and Benchmarking, 12(5), 543-560.
  60. Verma, A., Tripathy, S., & Singhal, D. (2022). The Significance of Warehouse Management in Supply Chain: An ISM Approach. Decision Making: Applications in Management and Engineering.
  61. Saha, P., Narain, R., Kumar, R., Singhal, D., Panda, A., Sahoo, A. K., & Das, D. (2022). CRYOGENICS AS A CLEANER COOLING STRATEGY FOR MACHINING APPLICATIONS: A CONCISE REVIEW. International Journal of Energy for a Clean Environment, 23(8).
  62. Pradhan RC, Das D*, Sahoo BP, Chaubey AK, Machinability of squeeze cast (TiB2+CNT)/Al 7075 metal matrix nano-composite during EDM with untreated and cryogenic treated Cu electrodes: a comparative study, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1-18 (2022). First online published on 29-7-2022. Sage, DOI: 10.1177/09544062221110394
  63. Saha P, Narain R, Kumar R*, Singhal D, Panda A, Sahoo AK and Das D, Cryogenics as a cleaner cooling strategy for machining applications: a concise review, International Journal of Energy for a Clean Environment 23(8):129–141 (2022). First online published on 22-7-2022. Begell House, DOI: 10.1615/InterJEnerCleanEnv.2022038535
  64. Sarkar A*, Sahu D, Das D, Behera SP, Nayak SK and Mandal BK. Performance and emission study of ethanol-blended gasoline powered small vcr engine. International Journal of Energy for a Clean Environment 23(7):1–12 (2022). First online published on 17-5-2022. Begell House, DOI: 10.1615/InterJEnerCleanEnv.2021038246
  65. Sinha, G S., Muthukumar, P., Sharma, M., Mishra, N K. (2022). Thermal performance and emission analysis of self-aspirated kerosene pressure stove with porous radiant burner using kerosene nanofuels, J. Environ. Sci. Technol. (2022). https://doi.org/10.1007/s13762-022-04179-8
  66. Varshney, A., Mishra, N K., Das, R., Sinha, G S. (2022) Parametric Study, on The performance of an electrostatic precipitator: A Numerical Approach, International Journal of Energy for a Clean EnvironmentVolume 23, pp. 19-30
  67. Joshi, K. K., Kar, V. R., & Thomas, B. (2022). Higher-order finite element solution of graphene platelets reinforced nanocomposite curved panels with uniform/non-uniform porosity. Mechanics Based Design of Structures and Machines. https://doi.org/10.1080/15397734.2022.2104311
  68. Fabrication and characterization of silica ceramic compact prepared using aloe vera mucilage as a binder, International Journal of Applied Ceramic Technology(accepted for publication). Jyoti, Manish Tiwari, Kalyani Mohanta, Vinay Kumar Singh(2022)
  69. Synthesis, morphological and thermomechanical characterization of light weight silica foam via. Reaction generated thermo-foaming process, Journal of the European Ceramic Society, 42(2022)6671-6683 Vaibhav Pandey, Mayank Kumar Yadav, Ashutosh Gupta, Kalyani Mohanta, S.K. Panda, V.K. Singh
  70. A comparative study on physio-mechanical properties of silica compacts fabricated using rice husk ash derived amorphous and crystalline silica , Ceramics International(2022), Asfutosh Gupta, Vaibhav Panday, Mayank Kumar Yadav, Kalyani Mohanta, Manas Ranjan Majhi
  71. A low cost-approach to develop silica doped Tricalcium Phaophate(TCP) scaffold by valorizing animal bone waste and rice husk for tissue engineering applications, Ceramics International, 48 (2022) 25335-25345 M.K.Yadav, V.Pandey, K.Mohanta, V.K.Singh.
  72. Green Properties of dry pressed alumina compact prepred using Aloe Vera gel and sucrose as a binder, Transactions of the Indian Ceramic Society, 81(1), pp 7-14 (2022) Jyoti, Vaibhav Pandey, Mayank Kumar Yadav, Kalyani Mohanta, Vinay Kumar Singh.
  73. Ghose, P., Sahoo, T. K., Ranjan, R., Sahu, K. B. (2022). Performance Prediction of a Model Tesla Valve with Different Geometrical Configuration, International Journal of Fluid Mechanics Research, 49(2), 1-16.
  74. Tripathi, J. P., Hasan, M., & Ghoshal, S. K. (2022). Real-time model inversion control for speed recovery of hydrostatic drive used in the rotary head of a blasthole drilling machine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(1), 1-15.
  75. Panwar, V. S., Pandey, A., & Hasan, M. (2022). Design and fabrication of a novel concept-based autonomous controlled solar powered four-wheeled Floor Cleaning Robot for wet and dry surfaces. International Journal of Information Technology, 1-10.
  76. Panwar, V. S., Pandey, A., & Hasan, M. E. (2022). E-puck motion control using multi-objective particle swarm optimization. Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva, 42(1), 0-0.
  77. Dewangan, H. C., Sharma, N., Hirwani, C. K., & Panda, S. K. (2022). Numerical eigenfrequency and experimental verification of variable cutout (square/rectangular) borne layered glass/epoxy flat/curved panel structure. Mechanics Based Design of Structures and Machines, 50(5), 1640–1657. doi: 10.1080/15397734.2020.1759432
  78. Dewangan, H. C., Sharma, N., & Panda, S. K. (2022). Numerical Nonlinear Static Analysis of Cutout-Borne Multilayered Structures and Experimental Validation. AIAA Journal, 60(2). doi: 10.2514/1.J060643
  79. Mohapatra, S., Sharma, N., Dewangan, H. C., & Panda, S. K. (2022). Flutter characteristics of multi-layered composite shell panels under supersonic flow with curvature effect. Waves in Random and Complex Media. doi: 10.1080/17455030.2022.2083719
  80. Ramteke, P. M., Panda, S. K., & Sharma, N. (2022). Nonlinear Vibration Analysis of Multidirectional Porous Functionally Graded Panel Under Thermal Environment. AIAA Journal, 60(8), 4923–4933. doi: 10.2514/1.J061635
  81. Dewangan, H. C., Sharma, N., & Panda, S. K. (2022). Thermomechanical loading and cut-out effect on static and dynamic responses of multilayered structure with TD properties. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. doi: 10.1177/09544062221089153
  82. Dewangan, H. C., Sharma, N., Thakur, M., Panda, S. K., & Sahu, P. (2022). Numerical thermo-mechanical bending analysis of hybrid layered composite curved panel and experimental validation. European Physical Journal Plus, 137(1). doi: 10.1140/epjp/s13360-021-02335-6
  83. Kumar, V., Dewangan, H. C., Sharma, N., & Panda, S. K. (2022). Numerical prediction of static and vibration responses of damaged (crack and delamination) laminated shell structure: An experimental verification. Mechanical Systems and Signal Processing, 170. doi: 10.1016/j.ymssp.2022.108883
  84. Kumar, V, Dewangan, H. C., Sharma, N., & Panda, S. K. (2022). Numerical and experimental deflection behavior of damaged doubly curved composite laminated shell structure. Archive of Applied Mechanics. doi: 10.1007/s00419-022-02202-5
  85. Kumar, V, Dewangan, H. C., Sharma, N., & Panda, S. K. (2022). Numerical frequency and SERR response of damaged (crack/delamination) multilayered composite under themomechanical loading: An experimental verification. Composite Structures, 293. doi: 10.1016/j.compstruct.2022.115709
  86. Kumar, V, Kumar, E. K., Dewangan, H. C., Sharma, N., Panda, S. K., & Mahmoud, S. R. (2022). Strain Rate Loading Effects on Fiber-Reinforced Polymeric Composites with and Without Damage: A Comprehensive Review. Transactions of the Indian Institute of Metals. doi: 10.1007/s12666-022-02728-w
  87. Sahu, P., Sharma, N., Dewangan, H. C., & Panda, S. K. (2022). Theoretical Prediction and Experimental Validity of Thermal Frequency Responses of Laminated Advanced Fiber-Reinforced Epoxy Hybrid Composite Panel. International Journal of Structural Stability and Dynamics. doi: 10.1142/S0219455422500882
  88. Sahu, P., Sharma, N., Dewangan, H. C., & Panda, S. K. (2022). Thermo-Mechanical Transient Flexure of Glass-Carbon-Kevlar-Reinforced Hybrid Curved Composite Shell Panels: An Experimental Verification. International Journal of Applied Mechanics, 14(1). doi: 10.1142/S1758825121501209
  89. Ramteke, P. M., Kumar, V., Sharma, N., & Panda, S. K. (2022). Geometrical nonlinear numerical frequency prediction of porous functionally graded shell panel under thermal environment. International Journal of Non-Linear Mechanics, 143. doi: 10.1016/j.ijnonlinmec.2022.104041
  90. Sahoo, B., Sharma, N., Sahoo, B., Malhari Ramteke, P., Kumar Panda, S., & Mahmoud, S. R. (2022). Nonlinear vibration analysis of FGM sandwich structure under thermal loadings. Structures, 44, 1392–1402. doi: 10.1016/j.istruc.2022.08.081
  91. Sahu P, Sharma N, Dewangan HC, Panda SK, 2022. “Thermo-Mechanical Transient Flexure of Glass-Carbon-Kevlar-Reinforced Hybrid Curved Composite Shell Panels: An Experimental Verification.” International Journal of Applied Mechanics 14(1): 2150120. https://doi.org/10.1142/S1758825121501209.
  92. Dewangan HC, Sharma N, Thakur M, Panda SK, Sahu P, 2022. “Numerical Thermo-Mechanical Bending Analysis of Hybrid Layered Composite Curved Panel and Experimental Validation.” The European Physical Journal Plus 137(1): 1–12. https://doi.org/10.1140/epjp/s13360-021-02335-6.
  93. Sahu P, Sharma N, Dewangan HC, Panda SK, 2022. “Theoretical Prediction and Experimental Validity of Thermal Frequency Responses of Laminated Advanced Fiber-Reinforced Epoxy Hybrid Composite Panel.” International Journal of Structural Stability and Dynamics 22(8): 2250088. https://doi.org/10.1142/S0219455422500882.
  94. Ghose, P., Sahoo, T. K., Ranjan, R., & Sahu, K. B. (2022). PERFORMANCE PREDICTION OF A MODEL TESLA VALVE WITH DIFFERENT GEOMETRICAL CONFIGURATION. International Journal of Fluid Mechanics Research.
  95. Sahoo, T. K., & Ghose, P. (2022). Effect of Inlet Swirl on Combustion Performance and Soot Formation of a Turbulent Methane-Air Non-Premixed Flame. Jordan Journal of Mechanical & Industrial Engineering, 16(2).
  96. Ranjan, R., Surekha, B., & Ghose, P. (2022). Effect of cooling slope process parameters on non-dendritic feedstock production: A comprehensive review. Journal of The Institution of Engineers (India): Series C, 102(3), 821-842.
  97. P Das, SP Kar, RK Sarangi, (2022). Review on thermal performance of heat exchanger using phase change material, International Journal of Energy Research. https://doi.org/10.1002/er.8345.
  98. P Das, R Kundu, SP Kar, RK Sarangi, (2022). Fabrication of Composite Phase Change Material: A Critical Review,Advancement in Materials, Manufacturing and Energy Engineering. Vol. II, 97-106.
  99. Kumar, K., Mishra, R., Singh, S., Kumar, A., & Pandey, A. (2022). Development of an autonomous vision sensor-actuator-based circumferential seam path tracker welding machine/device for LPG cylinders. Memories-Materials, Devices, Circuits and Systems, 2, 100009.
  100. Maity, R., Mishra, R., Patnaik, P. K., & Sain, M. (2022). Design and Analysis of Hybrid Fixed-Wing Type Flying Robot. Wireless Communications and Mobile Computing, 2022.
  101. Subbiah, G., Devarajan, Y., Mishra, R., & Thangaraja, J. (2022). Experimental research on waste and inedible feedstock as a partial alternate fuel: environmental protection and energy-saving initiative. Biomass Conversion and Biorefinery, 1-13.
  102. Dey, S., Mishra, R., Mohapatra, M., & Sabut, S. (2022). MICRO ACTIVE CATHETERS AND EMBOLIZATION TECHNIQUES: A BRIEF REVIEW BASED ON DESIGN AND WORKING EFFICACY. Biomedical Engineering: Applications, Basis and Communications, 2230001.
  103. Devarajan, Y., Munuswamy, D. B., Subbiah, G., Mishra, R., & Vellaiyan, S. (2022). Evaluation of compression ignition engine ignition patterns fueled with dual fuels. International Journal of Green Energy, 19(6), 676-684.
  104. Aurtherson, P. B., Hemanandh, J., Devarajan, Y., Mishra, R., & Abraham, B. C. (2022). Experimental testing and evaluation of coating on cables in container fire test facility. Nuclear Engineering and Technology, 54(5), 1652-1656.
  105. Devarajan, Y., Munuswamy, D. B., Nalla, B. T., Choubey, G., Mishra, R., & Vellaiyan, S. (2022). Experimental analysis of Sterculia foetida biodiesel and butanol blends as a renewable and eco-friendly fuel. Industrial Crops and Products, 178, 114612.
  106. Shah, K., & Mishra, R. (2022). Modelling and optimization of robotic manipulator mechanism for computed tomography guided medical procedure. Scientia Iranica, 29(2), 543-555.
  107. Saidani, O., Manoharan, R. R., Naje, A. S., Mishra, R., Subburaj, A., Sikkandar, M. Y., … & Sengan, S. (2022). Analysis of positive correlation in magnitude and time measurement for earthquake using electric signals. Earth Science Informatics, 1-18.
  108. Anam, M., Rane, K. P., Alenezi, A., Mishra, R., Ramamurthy, S., & Joseph, F. J. J. (2022). Content classification tasks with data preprocessing manifestations. Webology, 19(1).
  109. Nalla, B. T., Devarajan, Y., Subbiah, G., Sharma, D. K., Krishnamurthy, V., & Mishra, R. (2022). Investigations of combustion, performance, and emission characteristics in a diesel engine fueled with Prunus domestica methyl ester and n‐butanol blends. Environmental Progress & Sustainable Energy, e13811.
  110. Jena, S. M., Sant, S. M., Mishra, R., Nayak, S. K., & Nayak, S. (2022). Design and analysis of flying ua V drone for sanitization purpose. Materials Today: Proceedings.
  111. Sahu, S., Paikaray, S., Sahu, R. K., & Nayak, B. B. (2022). Fault detection in structural elements: Using flexible fuzzy logic model. Materials Today: Proceedings.
  112. Nayak, B. B., Kumar, N., Singh, A., Sahu, S., Das, S. S., Behera, D. D., & Sahu, R. K. (2022). Genetic programming approach to predict the performance characteristics of WEDM taper cutting process. Materials Today: Proceedings.
  113. Sahu, R. K., Das, R., Routara, B. C., Nayak, B. B., & Sahu, S. (2022). Multi-hole extrusion process: A review. Materials Today: Proceedings.
  114. Das, P., Kar, S.P., Sarangi, R.K. (2022) Review on thermal performance of heat exchanger using phase change material International Journal of Energy Research, 46 (12), pp. 16208-16240.
  115. Mahapatra, A.S., Kar, S.P., Swain, A.(2022) Experimental analysis of saturated pool boiling of acetone and isopropanol with added surfactant sodium lauryl sulfate over aluminum surface Heat Transfer, 51 (5), pp. 3853-3868.
  116. Mukherjee, S., Mishra, P.C., Chakrabarty, S. & Chaudhuri P. (2022). Effects of Sonication Period on Colloidal Stability and Thermal Conductivity of SiO2–Water Nanofluid: An Experimental Investigation. Journal of Cluster Science, 33(4), 1763-1771.
  117. Khadanga, V., Mukherjee, S., Mishra, P.C. & Chakrabarty, S. (2022). Heat Transfer Performance of Novel SiO2 Nanoaerosol: The Numerical Investigation, Microgravity Science and Technology. 34(3), 1-8.
  118. Mukherjee, S., Panda, S. R., Mishra, P. C., Sen, S., & Chaudhuri, P. (2022). Enhanced Thermo-Fluidic Performance of Aqueous SiO2 Nanofluid Flow Through a Horizontal Tube—An Experimental Investigation. Journal of Nanofluids, 11(5), 675-691.
  119. Mukherjee, S., Panda, S. R., Mishra, P. C., Noor, M. M., & Chaudhuri, P. (2022).Enhancement of thermal performance of engine coolant using Silica Nanoparticles. Sadhana, (Just Accepted, In Press)
  120. Mukherjee, S., Panda, S. R., Mishra, P. C., Sen, S., & Chaudhuri, P. (2022). Thermophysical and transient heat transfer characteristics of aqueous SiO2 nanofluid in energy management applications. Proceedings of IMechE Part E: Journal of Process Mechanical Engineering. DOI: 10.1177/09544089221128472 (In Press)
  121. Naik, P., Pradhan, S., Acharya, S. K., & Sahoo, P. (2022). Effect of Environments on Mechanical Behaviour of Thermosetting Composites Reinforced with Bio-filler (Orange Peel Particulate) Materials. Biointerface Research in Applied Chemistry
  122. Naik, P., Pradhan, S., Acharya, S. K., & Sahoo, P. (2022). Effect of Carbonization of Orange Peel Particulate-Reinforced Polymer Composites: Mechanical and Morphological Properties. International Journal of Surface Engineering and Interdisciplinary Materials Science (IJSEIMS), 10(1), 1-20.
  123. Guha, S., Das S., (2022) Investigation over effect of different carbon content on various properties of titanium carbon nitride (TiCN) coating grown on Si (100) substrate by chemical vapor deposition (CVD) process. The European Physical Journal Plus, 137,363.https://doi.org/10.1140/epjp/s13360-022-02587-w
  124. Das, S., Kumar, D. Borah, R.  Dutta, A. Guha, S., (2022)  Impact of elevated temperature over different  properties of CVD SiCN coating developed in Nitrogen gas atmosphere. Silicon, 2022. https://doi.org/10.1007/s12633-021-01631-1
  125. Das, S., Guha, S., Ghadai, ,  Sharma, A., Chatterjee, S., (2022) Morphological, Mechanical Property Analysis and Comparative Study over Structural Properties of CVD TiN Film Grown Under Different Substrate Temperature in Nitrogen Gas Atmosphere. Silicon, 14, 183-199. https://doi.org/10.1007/s12633-020-00807-5
  126. Chauhan, H., Satapathy, S., & Sahoo, A. K. (2022). Farmer Workplace Discomfort Levels Leading to Adverse Mental Health. International Journal of Social Ecology and Sustainable Development (IJSESD), 13(1), 1-14.
  127. Satapathy, S. (2022). Work place discomfort and risk factors for construction site workers. International Journal of System Assurance Engineering and Management, 13(2), 668-680.
  128. Chauhan, H., Satapathy, S., & Sahoo, A. K. (2022). Sustainability in farming sector and physical comfort in work place to reduce Mental- stress of Farmers: A case study of Agricultural farmers in India by Anfis. International Journal of Social Ecology and Sustainable Development
  129. Satapathy, S. (2022). Mental Risk Faced During Lockdown in COVID-19: A Grey-TOPSIS Approach–A Case Study of Odisha. Journal of Information Technology Research (JITR), 15(1), 1-11.
  130. Chauhan, H., Satapathy, S., & Sahoo, A. K. (2022). An analysis on Sustainability in farming sector and ecosystem to reduce Risk-Factors Affecting the Mental-Health of Farmers: A case study of Agricultural farmers in India. International Journal of Social Ecology and Sustainable Development.
  131. Mishra, D., & Satapathy, S. (2022). The pandemic COVID-19 and its’ impact on Indian agricultural sectors: An Assessment of Farmers. Journal of Global Information Management, 30(4), 1-27. doi:10.4018/JGIM.297906
  132. Mishra, D., & Satapathy, S. (2022). The challenges and problems in the implementation of supply chain management (SCM) in small and medium scale industries: A case study of Indian coir industries. International Journal of Business Performance and Supply Chain Modelling, 13(2), 109-138. doi: 10.1504/IJBPSCM.2022.10049082
  133. Mishra, D., & Satapathy, S. (2022). Sustainable Agriculture: An Evaluation Using ANFIS. International Journal of Social Ecology and Sustainable Development (IJSESD), 13(1), 1-15. http://doi.org/10.4018/IJSESD.287124
  134. Mishra, D., & Satapathy, S., & Jain, V. K. (2022). An Adaptive Neural-Fuzzy Inference System for Prediction of Muscle Strength of Farmers of Odisha in India: An approach for the E-healthcare 4.0 prevention and analysis. International Journal of Service Science, Management, Engineering, and Technology, 13(1), 1-21. doi:10.4018/IJSSMET.297497
  135. Mishra, D., Satapathy, S., & Jain, V. K. (2022). A Grey-TOPSIS Approach to Minimize COVID-19 Transmission for the Betterment of Public-Health in the Indian Context. International Journal of Service Science, Management, Engineering, and Technology, 13(1), 1-14. http://doi.org/10.4018/IJSSMET.29032
  136. Mishra, D., Chauhan, H., Mishra, D. K., & Satapathy, S. (2022). Possible Opportunities in Face Mask Manufacturing During the COVID-19 Pandemic: A Study From India. International Journal of Sociotechnology and Knowledge Development (IJSKD), 14(2), 92-113. http://doi.org/10.4018/IJSKD.2022040106
  137. Mishra, D., & Satapathy, S. (2022). Sustainability-assessment for farm-machinery. Int J Syst Assur Eng Manag. https://doi.org/10.1007/s13198-022-01622-4
  138. Mandal, P., Roy, S., Singh, U.P., Investigation on the optical and electrical performance of aluminium doped gallium oxide thin films, Optical and Quantum Electronics, 2022, 54(8), 476
  139. Roy, S., Brecher, C., Lingertat, H., Sarin, V., Investigation on the effects of Ce3+:Lu2SiO5 nanocrystalline phosphors in reducing environment, Optical Materials, 2022, 129, 112492
  140. Rout, P.K., Roy, S., Ganguly, S., Rathore, D.K., A review on properties of magnesium-based alloys for biomedical applications, Biomedical Physics and Engineering Express, 2022, 8(4), 042002
  141. Singh, D.P., Rathore, S.K., Chaudhuri, S.(2022). Performance assesment of non-Newtonian fluid flow in corrugated channels of various profiles: Heat transfer and entropy generation study. Journal of Thermal Science and Engineering Applications,14.doi:[DOI: 10.1115/1.4054448
  142. Anand, K., Bharwadaj, A., Chaudhuri, S., Mishra, V.K.(2022).Self-organizing map network for the decision making in combined mode conduction and radiation heat trasnfer.Arabian Journal for Science and Engineering, 47, 10.1007/s13369-021-06489-4
  143. Chaudhuri,S., Mohanty, R.L., Mishra, V.K. (2022). Convective heat transfer in electromagnetohydrodynamic flow of third grade fluids through large parallel plates: a study on effect of parametric variation on thermal characteristics. Sadhana, 47(2), 1-14, 10.1007/s12046-022-01862-x
  144. Chaudhuri, S., Chakraborty, P., Das, M., Das, B. (2022). Magnetohydrodynamic mixed convection in a non-Newtonian third-grade fluid flowing through vertical parallel plates: A semi-analytical study of flow and heat transfer. Heat Transfer, 51(4),3373-3400,  http://doi.org/10.1002/htj.22455
  145. Mohapatra, B., Tripathy, S., Singhal, D., & Saha, R. (2022). Significance of digital technology in manufacturing sectors: Examination of key factors during Covid-19. Research in Transportation Economics, 93. doi: 10.1016/j.retrec.2021.101134
  146. Vats, I., Singhal, D., Tripathy, S., & Jena, S. K. (2022). The transition from BS4 to BS6 compliant vehicles for eco-friendly mobility in India: An empirical study on switching intention. Research in Transportation Economics, 91. doi: 10.1016/j.retrec.2021.101131
  147. Verma, A., Tripathy, S., & Singhal, D. (2022). The Significance of Warehouse Management in Supply Chain: An ISM Approach. Decision Making: Applications in Management and Engineering.
  148. Kuruvilla, A., Singhal, D., Tripathy, S., & Mohapatra, B. (2022). Challenges of sustainability in Indian manufacturing sector: a critical review. International Journal of Process Management and Benchmarking, 12(5), 543-560.
  149. Nayak, S.K., Hoang, A.T., Nižetić, S., Nguyen, X.P., Le, T.H. (2022). Effects of advanced injection timing and inducted gaseous fuel on performance, combustion and emission characteristics of a diesel engine operated in dual-fuel mode. Fuel, 2022, 310, 122232, DOI: 10.1016/j.fuel.2021.122232
  150. Nayak, S.K., Nižetić, S., Pham, V.V., Huang, Z., Olcer, A.I., Bui, V.G., Wattanavichien, K., Hoang, A.T. (2022). Influence of injection timing on performance and combustion characteristics of compression ignition engine working on quaternary blends of diesel fuel, mixed biodiesel, and t-butyl peroxide. Journal of Cleaner Production, 333,130160, DOI: 10.1016/j.jclepro.2021.130160
  151. Banerjee, D., & Mishra, S. B. (2022) A Numerical Study on Warpage Deformation of Fused Deposition Modelling Built parts. Int. Journal of Mechanical Engineering, 7, 2345-2350
  152. Anand, K., Bhardwaj, A., Chaudhuri, S. et al. Self-Organizing Map Network for the Decision Making in Combined Mode Conduction-Radiation Heat Transfer in Porous Medium. Arab J Sci Eng (2022). https://doi.org/10.1007/s13369-021-06489-4
  153. Mishra, VK, Dasgupta, U, Patra, S, Pal, R, Anand, K. A dynamic two-level artificial neural network for estimation of parameters in combined mode conduction-radiation heat transfer in porous medium: An application to handle huge dataset with noise. Heat Transfer. 2022; 51: 1306- 1335. https://doi.org/10.1002/htj.22353
  154. Mishra, VK, Anand, K, Bhardwaj, A. Clustering assisted artificial neural network for handling noisy big data: an application for estimation of parameters in combined mode conduction and radiation heat transfer. Heat Transfer. 2022; 51: 5386- 5416. doi:10.1002/htj.22552
  155. Chaudhuri, S., Mohanty, R.L. & Mishra, V.K. Convective heat transfer in electromagnetohydrodynamic flow of third grade fluids through large parallel plates: a study on effect of parametric variation on thermal characteristics. Sādhanā 47, 96 (2022). https://doi.org/10.1007/s12046-022-01862-x
  1. Sarangi RK,  Swain A, Rane MV, Kar SP, Sekhar PC,(2021) A unified model for multi‐turn closed‐loop pulsating heat pipe, Heat Transfer 50 (4), 3683-3703
  2. Sukumar S, Kar SP, Swain A, Sarangi RK,  Sekhar PC, (2021) A Combined CFD, ANFIS and NSGA-II Model for Repetitive Pulse Laser Drilling Process
  3. Mohanty RL, Swain A, Das MK, (2021) Study of boiling behavior of surfactant added saline water over coated surface, Heat and Mass Transfer 56 (7), 2079-2092
  4. Mamuni Arya, Samiran Samanta & Akshaya Kumar Rout, “Review of Performance analysis of green engine fueled with gasoline blended bio-fuel,” published in AIP conference proceedings (Materials, Mechanics & Modeling), 2341, 030016 (2021), https://doi.org/10.1063/5.0050129.
  5. S Tripathy, A K Rout & M K Roul, “Heat transfer characteristics of Methane Air Diffusion flames impinging normally on plane surfaces, published in Journal of Computational and Applied Research in Mechanical Engineering (JCARME), Vol. 10, Issue-2, 2021, pp. 361-372. (Scopus Index).
  6. Kumar, R., Pandey, A., Panda, A., & Sahoo, A. K. (2021). Analysis of Wiper Tool Failure and Surface Roughness in Turning of Bio-compatible Ti-6Al-4V ELI Alloy. Journal of Failure Analysis and Prevention, 21(4), 1403-1422.
  7. Sahoo, A. K., Panda, A., Nayak, B. B., Kumar, R., Das, R. K., & Nayak, R. K. (2021). Machinability model and multi-response optimisation of process parameters through regression and utility concept. International Journal of Process Management and Benchmarking, 11(3), 390-414.
  8. Kumar, R., Pandey, A., Panda, A., Mallick, R., & Sahoo, A. K. (2021). Grey-Fuzzy Hybrid Optimization and Cascade Neural Network Modelling in Hard Turning of AISI D2 Steel. International journal of integrated engineering, 13(4), 189-207.
  9. Sarangi RK,  Swain A, Rane MV, Kar SP, Sekhar PC,(2021) A unified model for multi‐turn closed‐loop pulsating heat pipe, Heat Transfer 50 (4), 3683-3703
  10. Sukumar S, Kar SP, Swain A, Sarangi RK,  Sekhar PC, (2021) A Combined CFD, ANFIS and NSGA-II Model for Repetitive Pulse Laser Drilling Process
  11. Mohanty RL, Swain A, Das MK, (2021) Study of boiling behavior of surfactant added saline water over coated surface, Heat and Mass Transfer 56 (7), 2079-2092
  12. Rout, A. K., Sahoo, N., & Kalita, P. (2021). Transient Response Characteristics and Performance Assessment of a Calorimetric Surface Junction Probe Under Impulsive Thermal Loading. Journal of Heat Transfer, 143(6).
  13. Rout, A. K., Agarwal, S.,Kalita, P. & Sahoo, N. (2021). Fast response transient behaviour of a coaxial thermal probe and recovery of surface heat flux for shock tube flows. Experimental Thermal and Fluid Science, 127, 110427.
  14. Agarwal, S., Sahoo, N., & Rout, A. K. (2021). Determination of Instantaneous Surface Heat Flux Inside the Combustion Chamber of an Internal Combustion Engine using Coaxial Thermal Probe. Journal of The Institution of Engineers (India): Series C, 102(4), 1099-1106.
  15. Panwar, V. S., Pandey, A., & Hasan, M. E. (2021). Motor velocity based multi-objective genetic algorithm controlled navigation method for two-wheeled pioneer P3-DX robot in V-REP scenario. International Journal of Information Technology, 13(5), 2101-2108.
  16. Gupta, A., Adhikari, R., Pandey, A., & Kashyap, A. K. (2021). Orientation angle based online motion control of an Aldebaran NAO humanoid robot in V-REP software environment using novel sunflower optimization (SFO) algorithm. International Journal of Information Technology, 13(6), 2175-2183.
  17. Panwar, V. S., Pandey, A., & Hasan, M. E. (2021). Generalised regression neural network (GRNN) architecture-based motion planning and control of an e-puck robot in V-REP software platform. acta mechanica et automatica, 15(4), 209-214
  18. Kashyap, A. K., Parhi, D. R., & Pandey, A. (2022). Multi-objective optimization technique for trajectory planning of multi-humanoid robots in cluttered terrain. ISA transactions, 125, 591-613.
  19. Kashyap, A. K., Parhi, D., & Pandey, A. (2021). Improved modified chaotic invasive weed optimization approach to solve multi-target assignment for humanoid robot. Journal of Robotics and Control (JRC), 2(3), 194-199.
  20. Kumar, R., Pandey, A., Panda, A., Mallick, R., & Sahoo, A. K. (2021). Grey-Fuzzy Hybrid Optimization and Cascade Neural Network Modelling in Hard Turning of AISI D2 Steel. International journal of integrated engineering, 13(4), 189-207.
  21. Kumar, R., Pandey, A., Panda, A., & Sahoo, A. K. (2021). Analysis of Wiper Tool Failure and Surface Roughness in Turning of Bio-compatible Ti-6Al-4V ELI Alloy. Journal of Failure Analysis and Prevention, 21(4), 1403-1422.
  22. Raharja, N. M., Maarif, A., Supangkat, G., Pandey, A., Deniz, C., Nurjanah, A., … & Ahmad, I. (2021). Empowerment of mosque communities to increase body immune with aroma therapy robots. Jurnal Pengabdian Dan Pemberdayaan Masyarakat Indonesia, 1(4), 127-135.
  23. Kumar, A., Gupta, T. V. K., Jha, R. K., & Ghosh, S. K. (2021). Wear analysis of abrasive waterjet nozzle using suprathreshold stochastic resonance technique. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(2), 499-504.
  24. Kumar, A., Deval, P., Shrinet, E. S., & Ghosh, S. K. (2021). Investigation on tribological properties of used engine oil with graphene. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(7), 1420-1429.
  25. Chavda, A., Harichandan, A. B., & Mehta, P. (2021). Numerical analysis of multiphase flow in chemical looping reforming process for hydrogen production and CO2 capture. Experimental and Computational Multiphase Flow. DOI: 10.1007/s42757-021-0105-7.
  26. Joshi ,Y. A., Pandya, D., Bhoraniya, R., & Harichandan, A. B. (2021). Numerical simulation of low Reynolds numer gusty flow past two side-y-side circular cylinders. Lecture Notes in Mechanical Engineering. Vol. 29, pp. 71-78.
  27. Kumar, A., Chaubdar P., Sinha, G. S., & Harichandan, A.B. (2021). Performance analysis of NACA4412 airfoil with Gurney flap. Lecture Notes in Mechanical Engineering. Vol. 29. pp. 167 – 176.
  28. Panigrahi, S., Maity, P. S., Sinha, G. S., Dangi, D., & Harichandan, A.B. (2021). Modified method of characteristicsfor analysing cold flow in bell-type rocket nozzle. Lecture Notes in Mechanical Engineering. Vol 29, pp. 157 – 164.
  29. Pandey, P., Singh, D., Das, P., Ghosh, D., & Harichandan, A. B. (2021). Numerical investigation of various wake patterns in flow past two side-by-side cylinders. Lecture Notes in Mechanical Engineering. Vol. 29, pp. 199-206.
  30. Samal, P., Babu, D. M., Kiran, S. V., Surekha, B., Vundavilli, P. R., & Mandal, A. (2021). Study of microstructural and machining characteristics of hypereutectic Al-Si alloys using wire-EDM for photovoltaic application. Silicon, 13(12), 4407-4419.
  31. Ranjan, R., Surekha, B., & Ghose, P. (2021). Effect of cooling slope process parameters on non-dendritic feedstock production: A comprehensive review. Journal of The Institution of Engineers (India): Series C, 102(3), 821-842.
  32. Das, A., Vundavilli, P. R., Surekha, B., & Sai, V. S. (2021). Experimental investigations on the electrodeposition of Ni on copper substrate. International Journal of Manufacturing Technology and Management, 35(5), 443-454.
  33. Kar, C., & Surekha, B. (2021). Characterisation of aluminium metal matrix composites reinforced with titanium carbide and red mud. Materials Research Innovations, 25(2), 67-75.
  34. Gouda, D., Panda, A., Nanda, B. K., Kumar, R., Sahoo, A. K., & Routara, B. C. (2021). Recently evaluated Electrical Discharge Machining (EDM) process performances: A research perspective. Materials Today: Proceedings, 44, 2087–2092. https://doi.org/10.1016/j.matpr.2020.12.180
  35. Panda, S. K., Rana, B. K., & Kumar, P. (2021). Competition of roller rotation and horizontal crossflow to control the free surface cusp-induced air entrainment. Physics of Fluids, 33(11), 112114.
  36. Rana, B. K., & Senapati, J. R. (2021). Entropy generation analysis and cooling time estimation for a rotating vertical hollow tube in the air medium. ASME Journal of Heat Transfer, 143(4), 042101.
  37. Rana, B. K., Singh, B., & Senapati, J. R. (2021). Thermofluid characteristics on natural and mixed convection heat transfer from a vertical rotating hollow cylinder immersed in air: a numerical exercise. Journal of Heat Transfer, 143(2), 022601.
  38. Sahoo, A. K., Panda, A., Nayak, B. B., Kumar, R., Das, R. K., & Nayak, R. K. (2021). Machinability model and multi-response optimisation of process parameters through regression and utility concept. International Journal of Process Management and Benchmarking, 11(3), 390–414. https://doi.org/10.1504/IJPMB.2021.115009
  39. Behera, D. D., Nayak,B. B.& Prasad, S. (2021). Performance Analysis of PVT Based Hybrid Type Solar Dryer for Drying Food Products. Ambient Science, 8 (2), 24-29.
  40. Singhal, D., Jena, S. K., Aich, S., Tripathy, S., & Kim, H. C. (2021). Remanufacturing for Circular Economy: Understanding the Impact of Manufacturer’s Incentive under Price Competition. Sustainability, 13(21), 11839.
  41. Nayak, K. K., Singhal, D., & Tripathy, S. (2021). Determination of challenges and driving forces of green supply chain management in Indian manufacturing industries: a critical review. International Journal of Logistics Systems and Management, 40(1), 28-51.
  42. Mohapatra, B., Singhal, D., & Tripathy, S. (2021). Lean Manufacturing Towards Sustainability: A Grey Relational Framework. International Journal of System Dynamics Applications (IJSDA), 10(1), 16-30.
  43. Sahoo BP, Das D*, Chaubey AK, Strengthening mechanisms and modelling of mechanical properties of submicron-TiB2 particulate reinforced Al 7075 metal matrix composites, Materials Science & Engineering A 825 (2021) 141873, Elsevier, DOI: 10.1016/j.msea.2021.141873
  44. Yadav A, Das D*, Satpathy MP, Machining performance of titanium based prosthetic alloy: a grey relational approach, Advances in Materials and Processing Technologies (2021), 1-16. Taylor and Francis, DOI: 10.1080/2374068X.2021.1959090
  45. Sahoo BP and Das D*, Investigation on reinforcement incorporation factor and microstructure of Al 7075/submicron-TiB2 metal matrix composites processed through a modified liquid metallurgy technique. Experimental Techniques 45:2 (2021), 179-193. Springer, DOI: 10.1007/s40799-020-00429-x
  46. Jadam, T.,Rahul., Datta, S., & Mahapatra, S. S. (2021). Electro-discharge machining (EDM) of superalloy inconel 718 using triangular cross-sectioned copper tool electrode: emphasis on topography and metallurgical characteristics of the EDMed work surface. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 91(1), 123-134.
  47. Joshi, K. K., & Kar, V. R. (2021). Effect of material heterogeneity on the deformation behaviour of multidirectional (1D/2D/3D) functionally graded composite panels. Engineering Computations (Swansea, Wales). https://doi.org/10.1108/EC-06-2020-0301
  48. Mechanical and biological behaviour of porous Ti_SiO2 scaffold for tissue engineering application, Ceramic International, Elsevier Science, 47(15), (2021), M K Yadav, V Pandey, Jyoti, A Kumar, K Mohanta, V K Singh.
  49. Effect of sintering temperature on the electrical and gas sensing properties of Tin Oxide powder, Ceramic International, Elsevier Science, 47(16), pp 22794-22800, (2021),  K Lee, M Sahu. S Hazra, K Mohanta, H J Kim.
  50. Dielectric and ferroelectric properties of PVDF-thin film for bio-mechanical energy harvesting, Materials Today proceeding, 41(2), pp. 335-339, (2021), B K Panigrahi, D Sitikantha, A Bhuyan, H S Panda, K. Mohanta.
  51. Panwar, V. S., Pandey, A., & Hasan, M. E. (2021). Generalised regression neural network (GRNN) architecture-based motion planning and control of an e-puck robot in V-REP software platform. acta mechanica et automatica, 15(4).
  52. Panwar, V. S., Pandey, A., & Hasan, M. E. (2021). Motor velocity based multi-objective genetic algorithm controlled navigation method for two-wheeled pioneer P3-DX robot in V-REP scenario. International Journal of Information Technology, 13(5), 2101-2108.
  54. Tripathi, A., Bej, N., & Das, S. (2021). Membranes for Carbon Dioxide Separation on a Small Scale: State of Art, Challenges and Applications. Journal of Environmental Chemical Engineering, 9(6), 106860. https://doi.org/10.1016/J.JECE.2021.106860
  55. Shaikh, S. F., Panda, S. K., Sharma, N., & Jena, S. (2021). Creep behavior of Nickel–Titanium shape-memory alloys under static and dynamic loadings: an FEM approach. European Physical Journal Plus, 136(1). doi: 10.1140/epjp/s13360-021-01080-0
  56. Sharma, N., Lalepalli, A. K., Hirwani, C. K., Das, A., Panda, S. K., Topal, U., & Dede, T. (2021). Optimal deflection and stacking sequence prediction of curved composite structure using hybrid (FEM and soft computing) technique. Engineering with Computers, 37(1). doi: 10.1007/s00366-019-00836-8
  57. Kumar, Vikash, Dewangan, H. C., Sharma, N., & Panda, S. K. (2021). Combined Damage Influence Prediction of Curved Composite Structural Responses Using VCCT Technique and Experimental Verification. International Journal of Applied Mechanics, 13(8), 2150086.
  58. Ramteke, P. M., Mehar, K., Sharma, N., & Panda, S. K. (2021). Numerical prediction of deflection and stress responses of functionally graded structure for grading patterns (power-law, sigmoid, and exponential) and variable porosity (even/uneven). Scientia Iranica, 28(2 B). doi: 10.24200/SCI.2020.55581.4290
  59. Ramteke, P. M., Sharma, N., Choudhary, J., Hissaria, P., & Panda, S. K. (2021). Multidirectional grading influence on static/dynamic deflection and stress responses of porous FG panel structure: a micromechanical approach. Engineering with Computers. doi: 10.1007/s00366-021-01449-w
  60. Sahoo, B., Mehar, K., Sahoo, B., Sharma, N., & Panda, S. K. (2021). Thermal frequency analysis of FG sandwich structure under variable temperature loading. Structural Engineering and Mechanics, 77(1). doi: 10.12989/sem.2021.77.1.057
  61. Sahoo, B., Mehar, K., Sahoo, B., Sharma, N., & Panda, S. K. (2021). Thermal post-buckling analysis of graded sandwich curved structures under variable thermal loadings. Engineering with Computers. doi: 10.1007/s00366-021-01514-4
  62. Sahu, P., Sharma, N., Dewangan, H. C., & Panda, S. K. (2021). Experimental verification of multi-fibre hybridization influence on dynamic deflection and stress values of curved composite panel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(12). doi: 10.1177/14644207211035998
  63. Sahu, P., Sharma, N., & Panda, S. K. (2021). Multi-layer advanced fiber hybridisation (glass-carbon-Kevlar) and variable stifiness effect on composite structure responses (stress and deformation): An FE approach. Scientia Iranica, 28(5 B). doi: 10.24200/sci.2020.56810.4920
  64. Shaikh, S. F., Panda, S. K., Sharma, N., & Jena, S. (2021). Creep behavior of Nickel–Titanium shape-memory alloys under static and dynamic loadings: an FEM approach. European Physical Journal Plus, 136(1). doi: 10.1140/epjp/s13360-021-01080-0
  65. Sharma, N., Lalepalli, A. K., Hirwani, C. K., Das, A., Panda, S. K., Topal, U., & Dede, T. (2021). Optimal deflection and stacking sequence prediction of curved composite structure using hybrid (FEM and soft computing) technique. Engineering with Computers, 37(1). doi: 10.1007/s00366-019-00836-8
  66. Kumar A., Chaubdar P., Sinha G.S., Harichandan A.B., “Performance Analysis of NACA 4412 airfoil with gurney flap”, Lecture notes in Mechanical Engineering, Vol 29, 2021, pp 167-176
  67. Sahu P, Sharma N, Dewangan HC, Panda SK, 2021. “Experimental Verification of Multi-Fibre Hybridization Influence on Dynamic Deflection and Stress Values of Curved Composite Panel.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications: 146442072110359.
  68. Sahu P, Sharma N, Panda SK, 2021. “Multi-Layer Advanced Fiber Hybridisation (Glass-Carbon-Kevlar) and Variable Stifiness Effect on Composite Structure Responses (Stress and Deformation): An FE Approach.” Scientia Iranica 28(5 B): 2701–18. https://doi.org/10.24200/SCI.2020.56810.4920.
  69. Ranjan, R., Surekha, B., & Ghose, P. (2021). Effect of cooling slope process parameters on non-dendritic feedstock production: A comprehensive review. Journal of The Institution of Engineers (India): Series C, 102(3), 821-842.
  70. Sahu, A. K., & Ghose, P. (2021). Effect of Re-burn Fuel Stream Location on NO Reduction in a Model Pulverized Coal Combustor. Pollution, 7(3), 543-560.
  71. SAHU, A. K., & GHOSE, P. (2021). No formation and its reduction through co-flow methane reburn in a pulverised coal combustion process under various overall equivalence ratio. Journal of Thermal Engineering, 7(Supp 14), 2001-2016.
  72. Jha, P., Kumar, D., & Mishra, V. K. (2021). Development of mathematical models to predict the density and hardness of Fe-ZrO2 composites. Advances in Materials and Processing Technologies. https://doi.org/10.1080/2374068X.2021.1945298
  73. Ranjan, R., Surekha, B., & Ghose, P. (2021). Effect of cooling slope process parameters on non-dendritic feedstock production: A comprehensive review. Journal of The Institution of Engineers (India): Series C, 102(3), 821-842.
  74. Sarangi RK,  Swain A, Rane MV, Kar SP, Sekhar PC,(2021). A unified model for multi‐turn closed‐loop pulsating heat pipe. Heat Transfer. 50 (4), 3683-3703.
  75. RK Sarangi, SP Kar, MV Rane, A Swain, LK Pothal, (2021). Modeling for Fluid Flow and Heat Transfer in Closed Loop Pulsating Heat Pipe. Journal of Thermal Science and Engineering Applications(ASME) 13 (4).
  76. Ramasamy, P., Beemkumar, N., Subbiah, G., Devarajan, Y., & Mishra, R. (2021). Exploration of non-edible palm kernel oil as a potential heat transfer fluid for higher temperature applications. Biomass Conversion and Biorefinery, 1-9.
  77. Kumari, K. S., Samal, S., Mishra, R., Madiraju, G., Mahabob, M. N., & Shivappa, A. B. (2021). Diagnosing COVID-19 from CT Image of Lung Segmentation & Classification with Deep Learning Based on Convolutional Neural Networks. Wireless Personal Communications, 1-17.
  78. Mohapatra, M., & Mishra, R. (2021). MODERN AND INTEGRATED APPROACH FOR SAFETY ISSUES IN HEALTHCARE DURING COVID-19. Ilkogretim Online, 20(5).
  79. Shah, S., Mishra, R., Szczurowska, A., & Guziński, M. (2021). Non-invasive multi-channel deep learning convolutional neural networks for localization and classification of common hepatic lesions. Polish Journal of Radiology, 86(1), 440-448.
  80. Bhanu Teja, N., Devarajan, Y., Mishra, R., Sivasaravanan, S., & Thanikaivel Murugan, D. (2021). Detailed analysis on sterculia foetida kernel oil as renewable fuel in compression ignition engine. Biomass Conversion and Biorefinery, 1-12.
  81. Hemanandh, J., Devarajan, Y., Mishra, R., & Meenakshisundaram, N. (2021). Experimental investigation on slaughter, fish waste and poultry excrete oil as fuel blends in diesel engine. Biomass Conversion and Biorefinery, 1-9.
  82. Bhanu Teja, N., Devarajan, Y., Mishra, R., Sivasaravanan, S., & Thanikaivel Murugan, D. (2021). Detailed analysis on sterculia foetida kernel oil as renewable fuel in compression ignition engine. Biomass Conversion and Biorefinery, 1-12.
  83. Gupta, B., Saggu, G., Sundaram, S., Mishra, R., & Thakur, I. S. (2021). Climate Change Impacts on Soil Microorganisms that Regulate Nutrient Transformations. In Climate Change and the Microbiome (pp. 461-476). Springer, Cham.
  84. Das, M., Sahu, S., & Parhi, D. R. (2021). Composite materials and their damage detection using AI techniques for aerospace application: A brief review. Materials Today: Proceedings, 44, 955-960.
  85. Roy, S., Baruah, M. S., Sahu, S., & Nayak, B. B. (2021). Computational analysis on the thermal and mechanical properties of thin film solar cells. Materials Today: Proceedings, 44, 1207-1213.
  86. Nayak, B. B., Sahu, S., & Roy, S. (2021). Damage detection in structural elements: Using optimization of fuzzified rules. Materials Today: Proceedings, 44, 797-800.
  87. Jena, S. P., & Sahu, S. CRACK DETECTION IN STRUCTURE BY IMPROVED RECURRENT NEURAL NETWORKS APPROACH OTKRIVANJE PRSLINE U KONSTRUKCIJI POBOLJ艩ANIM PRISTUPOM REKURENTNIH NEURONSKIH MRE沤A.
  88. Kundu, R., Kar, S.P., Sarangi, R.K. (2021) Performance enhancement with inorganic phase change materials for the application of thermal energy storage: A critical review,,  Energy Storage
  89. Sarangi, R.K., Kar, S.P., Rane, M.V., Swain, A., Pothal, L.K. (2021) Modeling for Fluid Flow and Heat Transfer in Closed Loop Pulsating Heat Pipe Journal of Thermal Science and Engineering Applications, 13 (4), art. no. 041018.
  90. Sarangi, R.K., Swain, A., Rane, M.V., Kar, S.P., Sekhar, P.C. (2021) A unified model for multi-turn closed-loop pulsating heat pipe Heat Transfer, 50 (4), pp. 3683-3703.
  91. Sukumar, S., Kar, S.P.(2021) Numerical analysis of non-fourier phase-change heat transfer in biological tissues with the addition of nanoparticles Computational Thermal Sciences, 13 (3), pp. 89-102.
  92. Mukherjee, S., Mishra, P.C., Chaudhuri, P. & Chakrabarty S. (2021). Experimental investigation on thermal conductivity of surfactant-less aluminium oxide (Al2O3) in water nanofluid using acoustic velocity measurements. Current Science, 121(8), 1032-1038.
  93. Mukherjee, S., Halder, T., Ranjan, S., Bose, K., Mishra, P.C. & Chakrabarty, S. (2021). Effects of SiO2 nanoparticles addition on performance of commercial engine coolant: experimental investigation and empirical correlation.  Energy, 231, 120913.
  94. Arora, N., Mukherjee, S., Mishra, P.C., Chakrabarty, S. & Chaudhuri, P. (2021). Thermal conductivity enhancement of silica nanofluids for ultrafast cooling applications: statistical modeling and economic analysis. International Journal of Thermophysics, 42 (5), 1-22.
  95. Singh, J., Chakrabarty, S. & Pant, P. (2021). Strengthening effect of grain and twin boundaries in zirconium bi-crystal micropillars. Philosophical magazine Philosophical Magazine Letters. 101 (3), 93-106.
  96. Mukherjee, S., Jana, S., Chaudhuri, P. & Chakrabarty, S. (2021). Experimental investigation on thermo-physical properties and subcooled flow boiling performance of Al2O3/water nanofluids in a horizontal tube. International Journal of Thermal Sciences, 159, 106581
  97. Nayak, S., Nayak, R. K., & Panigrahi, I. (2021). Improvement of Low-Velocity Impact and Abrasive Wear Resistance of Carbon/Glass Fiber-Reinforced Polymer Hybrid Composites. Transactions of the Indian Institute of Metals, 74(9), 2245-2254.
  98. Nayak, S., Nayak, R. K., & Panigrahi, I. (2021). Effect of nano-fillers on low-velocity impact properties of synthetic and natural fibre reinforced polymer composites-a review. Advances in Materials and Processing Technologies, 1-24.
  99. Nayak, S., Pattnaik, S., Panigrahi, I., Nayak, R., & Parida, S. (2021). Small delamination detection in carbon fibre reinforced polymer composite beam by NDT and vibration analysis. Indian Journal of Engineering and Materials Sciences (IJEMS), 27(3), 789-794.
  100. Mukherjee, S., Panda, S. R., Mishra, P. C., & Chaudhuri, P. (2021). Convective flow boiling heat transfer enhancement with aqueous Al2O3 and TiO2 nanofluids: Experimental investigation. International Journal of Thermophysics, 42(6), 1-26.
  101. Mukherjee, S., Panda, S. R., Mishra, P. C., & Chaudhuri, P. (2021). Heat transfer enhancement with Tio 2/water nanofluid in a horizontal circular tube subjected to varying heat flux: An experimental study. Journal of Enhanced Heat Transfer, 28(8).
  102. Naik, P., Sahoo, P., Acharya, S. K., & Pradhan, S. (2021). Erosive wear behavior of bio-waste particulate-reinforced epoxy composites for low cost applications. Journal of the Indian Academy of Wood Science, 18(1), 1-13.
  103. Naik, P., Acharya, S. K., Sahoo, P., & Pradhan, S. (2021). Abrasive wear behaviour of orange peel (biowaste) particulate reinforced polymer composites. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(10), 2099-2109.
  104. Naik, P., Pradhan, S., Acharya, S. K., & Sahoo, P. (2021). Wear Behavior of Orange Peel Reinforced Epoxy Composite. In Advances in Mechanical Processing and Design (pp. 607-615). Springer, Singapore.
  105. Das, S.,  Guha, S.,  Ghadai, R., Sharma,  A.,  (2021) Influence of nitrogen gas over microstructural, vibrational and mechanical properties of CVD Titanium nitride (TiN) thin film coating, Ceramics International. 47, 16809-16819. https://doi.org/10.1016/j.ceramint.2021.02.254
  106. Das, S., Guha, S., Ghadai, R. Swain,BP.,  (2021) A comparative analysis over different properties of TiN, TiAlN and TiAlSiN thin film coatings grown in nitrogen gas atmosphere, Materials Chemistry and Physics, 258, 123866,
  107. Mishra, D., & Satapathy, S. (2021). Reliability and maintenance of agricultural machinery by MCDM approach. Int J Syst Assur Eng Manag. https://doi.org/10.1007/s13198-021-01256-y
  108. Mishra, D., & Satapathy, S. (In Press). Drudgery Reduction by Adoption of New Practices: “An Assessment of Farmers of Odisha in India”. International Journal of Social Ecology and Sustainable Development
  109. Chauhan, H., & Sahoo, A. K. (2021). Mental stress minimization in farmers: an approach using REBA, PSO, and SA. International Journal of System Assurance Engineering and Management, 1-12.
  110. Mishra, D., & Satapathy, S. (2021). SWARA approach for ranking of agricultural supply chain risks of Odisha in India. International Journal of Information and Decision Sciences, 13(1), 85-109.
  111. Satapathy, S. (2021). Sustainable Supply Chain Management Barriers in Shrimp Food Supply Chain: A Case Study of India by MCDM Method. International Journal of Social Ecology and Sustainable Development (IJSESD), 13(7), 1-20.
  112. Mishra, D., & Satapathy, S. (2021). Technology adoption to reduce the harvesting losses and wastes in agriculture. Clean Techn Environ Policy, 23(7), 1947-1963. https://doi.org/10.1007/s10098-021-02075-2
  113. Chauhan, H., & Sahoo, A. K. (2021). Mental stress minimization in farmers: an approach using REBA, PSO, and SA. International Journal of System Assurance Engineering and Management, 1-12.
  114.  Chauhan, H., Satapathy, S., & Sahoo, A. K. (2021). An integrated SWARA and QFD approach to minimize mental stress of Indian farmers. International Journal of Service Science, Management, Engineering, and Technology (IJSSMET), 12(2), 111-131.
  115. Chauhan, H., Satapathy, S., & Sahoo, A. K. (2021). A QFD approach based on fuzzy TOPSIS to reduce the mental stress of farmers: A case study of Odisha. International Journal of Service Science, Management, Engineering, and Technology (IJSSMET), 12(5), 148-166
  116. Satapathy, S. (2021). Analysis of Harvesting Sustainability: A Study on the Indian Agrisector. International Journal of Service Science, Management, Engineering, and Technology (IJSSMET), 12(4), 59-67.
  117. Chand, S., Chandrasekhar, P., Roy, S., Singh, S., Influence of Dispersoid Content on Compressibility, Sinterability and Mechanical Behaviour of B4C/BN Reinforced Al6061 Metal Matrix Hybrid Composites Fabricated via Mechanical Alloying, Metals and Materials International, 2021, 27(11), pp. 4841–4853
  118. Mandal, P., Usha Kiran, N., Chanda, U.K., Pati, S., Roy, S., Corrosion performance of graphene oxide coated 304 SS in PEMFC environment, SN Applied Sciences, 2021, 3(7), 715
  119. Mandal, P., Singh, U.P., Roy, S., Optical performance of europium-doped β gallium oxide PVD thin films, Journal of Materials Science: Materials in Electronics, 2021, 32(4), pp. 3958–3965
  120. Mishra, V.K., Chaudhuri, S. (2021). Implementation of stochastic optimization method-assisted radial basis neural network for transport phenomenon in non-Newtonian third grade fluis: Assesment of five optimization tools. Arabian Journal for Science and Engineering, 46 (12), 11797-11818,     DOI: 10.1007/s13369-021-05702-8.
  121. Chaudhuri, S., Sinha, S., Chakraborty, P., Das., M., Sahoo S., Das, B. (2021). Thermal characteristics of forced convection in combined pressure and shear -driven flow of a non-Newtonian third grade fluid through parallel plates. Heat Transfer, 50(7), 6737-6756, doi.org/10.1002/htj.22201
  122. Saini, M.V., Rathore, S.K., Chaudhuri, S. (2021). Thermo-hydraulic and entropy generation analysis for non-Newtonian fluid flow through sinusoidal wavy wall channel. Numerical Heat Transfer, Part A: Applications, 80 (1-2), 22-42, https://doi.org/10.1080/10407782.2021.1929288
  123. Kinage, A., Sahoo., S., Chaudhuri., S. (2021). Effects of different electrical arrangements and thomson effect on the system performance as well as optimum allocation ofthermocouples in a self-driven TEC and TEG. Thermal Science and Engineering Progress, 25(1), 101035, https://doi.org/10.1016/j.tsep.2021.101035
  124. Aich, S., Thakur, A., Nanda, D., Tripathy, S., & Kim, H.-C. (2021). Factors affecting esg towards impact on investment: A structural approach. Sustainability (Switzerland), 13(19). doi: 10.3390/su131910868
  125. Singhal, D., Jena, S. K., Aich, S., Tripathy, S., & Kim, H. C. (2021). Remanufacturing for Circular Economy: Understanding the Impact of Manufacturer’s Incentive under Price Competition. Sustainability, 13(21), 11839.
  126. Mahapatra, P., Tripathy, S., & Panda, S. K. (2021). Factors Influencing of SSCM Performance of the Indian Insurance Industry: An ISM Approach. International Journal of System Dynamics Applications (IJSDA), 10(4), 1-18.
  127. Saha, Rajnandini, Satyabrata Aich, Sushanta Tripathy, and Hee-Cheol Kim. “Artificial intelligence is reshaping healthcare amid COVID-19: A review in the context of diagnosis & prognosis.” Diagnostics 11, no. 9 (2021): 1604.
  128. Sahua, B. (2021). Application of Lean Tools in different Industries: A review. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(13), 2428-2435.
  129. Nayak, K. K., Singhal, D., & Tripathy, S. (2021). Determination of challenges and driving forces of green supply chain management in Indian manufacturing industries: a critical review. International Journal of Logistics Systems and Management, 40(1), 28-51.
  130. Aich, S., Tripathy, S., Joo, M. I., & Kim, H. C. (2021). Critical Dimensions of Blockchain Technology Implementation in the Healthcare Industry: An Integrated Systems Management Approach. Sustainability, 13(9), 5269.
  131. Sahua B, Manoria A , Tripathy S Agrawal P , (2021), “Analysis and prioritization of Lean manufacturing  framework with multi-criteria decision-making  approach”Journal of Huazhong University of Science and Technology Vol 50 issue 7 pp 1-10
  132. Mohapatra, B., Singhal, D., & Tripathy, S. (2021). Lean Manufacturing Towards Sustainability: A Grey Relational Framework. International Journal of System Dynamics Applications (IJSDA), 10(1), 16-30.
  133. Nguyen, X.P., Hoang, A.T., Ölçer, A.I., Engel, D., Pham, V.V., Nayak, S.K. (2021). Biomass-derived 2,5-dimethylfuran as a promising alternative fuel: An application review on the compression and spark ignition engine.  Fuel Processing Technology, 214,106687, DOI: 10.1016/j.fuproc.2020.106687
  134. Nayak, S.K., Hoang, A.T., Nayak, B., Mishra, P.C. (2021). Influence of fish oil and waste cooking oil as post mixed binary biodiesel blends on performance improvement and emission reduction in diesel engine.  Fuel, 289,119948, DOI: 10.1016/j.fuel.2020.119948
  135. Tiwari, P.K., Raj, S., Kumar, S., Singh, P., Swaraj, R., Sarak, S., Kumar Nayak, S., Chandra Mishra, P. (2021). Influence of calophyllum inophyllum and Jojoba oil methyl ester blended with n-pentanol additive upon overall performance, combustion and emission characteristics of a TDI engine operated in natural aspirated mode. Fuel, 288,119576, DOI: 10.1016/j.fuel.2020.119576
  136. Mishra, V.K., Chaudhuri, S. Implementation of Stochastic Optimization Method-Assisted Radial Basis Neural Network for Transport Phenomenon in Non-Newtonian Third-Grade Fluids: Assessment of Five Optimization Tools. Arab J Sci Eng 46, 11797–11818 (2021). https://doi.org/10.1007/s13369-021-05702-8
  137. Mishra, VK, Chaudhuri, S. Genetic algorithm-assisted artificial neural network for retrieval of a parameter in a third grade fluid flow through two parallel and heated plates. Heat Transfer. 2021; 50: 2090– 2128. https://doi.org/10.1002/htj.21970
  1. Swain A, Das MK,(2020) Flow boiling over tube bundles with combination of plain and coated tubes, Journal of Thermophysics and Heat Transfer 33 (2), 559-567
  2. Swain A, Mohanty RL, Das MK, (2020) Flow boiling under variable heat flux along the height over coated tube bundle, Experimental Thermal and Fluid Science 97, 89-93
  3. Sarangi RK, Kar SP,  Rane MV, Swain A, Pothal LK, (2020) Modeling for Fluid Flow and Heat Transfer in Closed Loop Pulsating Heat Pipe, Journal of Thermal Science and Engineering Applications 13 (4)
  4. A Swain, MK Das, Performance of porous coated 5× 3 staggered horizontal tube bundle under flow boiling, Applied Thermal Engineering 128, 444-452
  5. Bag, R., Panda, A., Sahoo, A. K., & Kumar, R. (2020). A Comprehensive Review on AISI 4340 Hardened Steel: Emphasis on Industry Implemented Machining Settings, Implications, and Statistical Analysis. International Journal of Integrated Engineering, 12(8), 61-82.
  6. Roy, S., Kumar, R., Sahoo, A. K., & Panda, A. (2020). Cutting tool failure and surface finish analysis in pulsating MQL-assisted hard turning. Journal of Failure Analysis and Prevention, 20(4), 1274-1291.
  7. Swain, S., Panigrahi, I., Sahoo, A. K., Panda, A., & Kumar, R. (2020). Effect of tool vibration on flank wear and surface roughness during high-speed machining of 1040 steel. Journal of Failure Analysis and Prevention, 20(3), 976-994.
  8. Kumar, R., Choudhury, A. R., Sahoo, A. K., Panda, A., & Malakar, A. (2020). Machinability investigation on novel Incoloy 330 super alloy using coconut oil based SiO2 Nano fluid. International Journal of Integrated Engineering, 12(4), 145-160.
  9. Pandey, A., Kumar, R., Sahoo, A. K., Paul, A., & Panda, A. (2020). Performance analysis of trihexyltetradecylphosphonium chloride ionic fluid under MQL condition in hard turning. International journal of automotive and mechanical engineering, 17(1), 7629-7647.
  10. Roy, S., Kumar, R., Sahoo, A. K., Pandey, A., & Panda, A. (2020). Investigation on hard turning temperature under a novel pulsating MQL environment: An experimental and modelling approach. Mechanics & Industry, 21(6), 605.
  11. Panda, A., Sahoo, A. K., Panigrahi, I., & Rout, A. K. (2020). Prediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signal. Mechanics & Industry, 21(5), 520.
  12. Swain, P. K., Mohapatra, K. D., Das, R., Sahoo, A. K., & Panda, A. (2020). Experimental investigation into characterization and machining of Al+ SiCp nano-composites using coated carbide tool. Mechanics & Industry, 21(3), 307.
  13. Swain A, Das MK,(2020) Flow boiling over tube bundles with combination of plain and coated tubes, Journal of Thermophysics and Heat Transfer 33 (2), 559-567
  14. Swain A, Mohanty RL, Das MK, (2020) Flow boiling under variable heat flux along the height over coated tube bundle, Experimental Thermal and Fluid Science 97, 89-93
  15. Sarangi RK, Kar SP,  Rane MV, Swain A, Pothal LK, (2020) Modeling for Fluid Flow and Heat Transfer in Closed Loop Pulsating Heat Pipe, Journal of Thermal Science and Engineering Applications 13 (4)
  16. A Swain, MK Das, Performance of porous coated 5× 3 staggered horizontal tube bundle under flow boiling, Applied Thermal Engineering 128, 444-452
  17. Rout, A. K., Sahoo, N., & Kalita, P. (2020). Effectiveness of coaxial surface junction thermal probe for transient measurements through laser based heat flux assessment. Heat and Mass Transfer, 56(4), 1141-1152.
  18. Pandey, A., Panwar, V. S., Hasan, M. E., & Parhi, D. R. (2020). V-REP-based navigation of automated wheeled robot between obstacles using PSO-tuned feedforward neural network. Journal of Computational Design and Engineering, 7(4), 427-434.
  19. Roy, S., Kumar, R., Sahoo, A. K., Pandey, A., & Panda, A. (2020). Investigation on hard turning temperature under a novel pulsating MQL environment: An experimental and modelling approach. Mechanics & Industry, 21(6), 605.
  20. Kashyap, A. K., Parhi, D. R., & Pandey, A. (2021). Analysis of Hybrid Technique for Motion Planning of Humanoid NAO. International Journal of Robotics and Control Systems, 1(1), 75-83.
  21. Joshi, Y. A., Kumar, A., Roy, A., & Harichandan, A.B. (2020), Moving surface boundary layer technique for NACA 0012 airfoil at ultra low Reynolds number. International Journal of Innovative Technology and Exploring Engineering. Vol. 09 (02), pp. 3788-3795.
  22. Raj, S., Rahul, Sinha, H. R., Shivani, Das, S., Guha, S., … Routara. (2020). Optimization of Surface Topography of Electro- Discharge Machined Super Alloy Inconel 825: Using TOPSIS Integrated with Taguchi Philosophy. Materials Today: Proceedings, 24, 218–224. https://doi.org/10.1016/j.matpr.2020.04.270
  23. Mishra, B. P., & Routara, B. C. (2020). Evaluation of technical feasibility and environmental impact of Calophyllum Inophyllum (Polanga) oil based bio-dielectric fluid for green EDM. Measurement: Journal of the International Measurement Confederation, 159. https://doi.org/10.1016/j.measurement.2020.107744
  24. Das, S., Satpathy, M. P., Routara, B. C., & Sahoo, S. K. (2020). Microstructural and joint analysis of ultrasonic welded aluminum to Cupro-Nickel sheets for Lithium-ion battery packs. Materials Science Forum, 978 MSF, 463–469. https://doi.org/10.4028/www.scientific.net/MSF.978.463
  25. Panda, S. R., Routara, B. C., Chakrabarty, S., & Kar, A. K. (2020). Influence of Treated Titania Nanoparticle on Mechanical Properties of Dental Nano-Composites: Manufacturing Method and Experimental Results. Lecture Notes in Mechanical Engineering, 633–641. https://doi.org/10.1007/978-981-15-1307-7_72
  26. Das, D., Chakraborty, V., Nayak, B. B., Satpathy, M. P., & Samal, C. (2020). Machining of aluminium-based metal matrix composite – A particle swarm optimisation approach. International Journal of Machining and Machinability of Materials, 22(1), 79–97. https://doi.org/10.1504/IJMMM.2020.104013
  27. Gombi S. M., Sahu D. (2020), A Review on Magneto-Caloric Materials for Room Temperature Refrigeration, International Journal of Automotive and Mechanical Engineering (IJAME) 17(1), 7805-7815
  28. Singhal, D., Tripathy, S., & Jena, S. K. (2020). Remanufacturing for the circular economy: Study and evaluation of critical factors. Resources, Conservation and Recycling, 156, 104681.
  29. Das D*, Chakraborty V, Nayak BB and Samal C. Machining of aluminium based metal matrix composite – a particle swarm optimization approach. International Journal of Machining and Machinability of Materials 22:1 (2020) 79-97. Inderscience Publication, DOI: 10.1504/IJMMM.2020.104013
  30. Nanda BK, Das D*, Routra BC, Dhupal D, Abrasive jet drilling of glass using normal-bed and fluidized- bed AJM setup, International Journal of Innovative Technology and Exploring Engineering (IJITEE) 9:3 (2020) 1335-1341. First online published on 10-01-2020. BEIES Publishers, DOI: 10.35940/ijitee.B7071.019320
  31. Sahoo BP, Das D*, Rath P, Chaubey AK, Effective functionalization of carbon nanotubes for reinforcement application in liquid state processed aluminium composites: a relatively greener approach, Journal of Composite Materials, 54:21 (2020) 2943–2951. Sage Publisher, DOI: 10.1177/0021998320906197
  32. Effect of sintering temperature on dielectric properties of 72 WT% (Al2O3):28 wt% (SiO2) ceramics, Korean Journal of Materials Research, Vol. 30, No.10, (2020), pp. 495-501, M Sahu, B K Panigrahi, H J Kim,  P L Deepti, S Hazra, K Mohanta.
  33. Synthesis of graphene oxide and green properties of dry pressed alumina compacts with small addition of graphene oxide/graphite” Australian Ceramic Society, 56, 1367-1375(2020), Vaibhav Pandey, Jyoti, Mayank Kumar Yadav, Ajay Kumar, Kalyani Mohanta
  34. Ghose, P., Sahu, K. B., Sahu, A. K. (2020). Computational Modeling on Heat Transfer Enhancement and Fluid Flow Behavior of Al2O3-Water Nanofluid through a Circular Duct, International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9(5), 1819-1824.
  35. Pandey, A., Panwar, V. S., Hasan, M. E., & Parhi, D. R. (2020). V-REP-based navigation of automated wheeled robot between obstacles using PSO-tuned feedforward neural network. Journal of Computational Design and Engineering, 7(4), 427-434.
  36. Anil, K. L., Panda, S. K., Sharma, N., Hirwani, C. K., & Topal, U. (2020). Optimal fiber volume fraction prediction of layered composite using frequency constraints- A hybrid FEM approach. Computers and Concrete, 25(4). doi: 10.12989/cac.2020.25.4.303
  37. Sahoo, B., Sahoo, B., Sharma, N., Mehar, K., & Panda, S. K. (2020). Numerical buckling temperature prediction of graded sandwich panel using higher order shear deformation theory under variable temperature loading. Smart Structures and Systems, 26(5). doi: 10.12989/sss.2020.26.5.641
  38. Sahu, P., Sharma, N., & Panda, S. K. (2020). Numerical prediction and experimental validation of free vibration responses of hybrid composite (Glass/Carbon/Kevlar) curved panel structure. Composite Structures, 241. doi: 10.1016/j.compstruct.2020.112073
  39. Satankar, R. K., Sharma, N., & Panda, S. K. (2020). Multiphysical theoretical prediction and experimental verification of vibroacoustic responses of fruit fiber-reinforced polymeric composite. Polymer Composites, 41(11). doi: 10.1002/pc.25724
  40. Satankar, R. K., Sharma, N., Ramteke, P. M., Panda, S. K., & Mahapatra, S. S. (2020). Acoustic responses of natural fibre reinforced nanocomposite structure using multiphysics approach and experimental validation. Advances in Nano Research, 9(4). doi: 10.12989/anr.2020.9.4.263
  41. Dewangan, H. C., Panda, S. K., & Sharma, N. (2020). Experimental Validation of Role of Cut-Out Parameters on Modal Responses of Laminated Composite – A Coupled FE Approach. International Journal of Applied Mechanics, 12(6). doi: 10.1142/S1758825120500684
  42. Mehar, K., Panda, S. K., & Sharma, N. (2020). Numerical investigation and experimental verification of thermal frequency of carbon nanotube-reinforced sandwich structure. Engineering Structures, 211. doi: 10.1016/j.engstruct.2020.110444
  43. Patle, B. K., Hirwani, C. K., Panda, S. K., Katariya, P. V., Dewangan, H. C., & Sharma, N. (2020). Nonlinear deflection responses of layered composite structure using uncertain fuzzified elastic properties. Steel and Composite Structures, 35(6). doi: 10.12989/scs.2020.35.6.753
  44. Sharma, N., & Panda, S. K. (2020). Multiphysical numerical (FE–BE) solution of sound radiation responses of laminated sandwich shell panel including curvature effect. Computers and Mathematics with Applications, 80(5). doi: 10.1016/j.camwa.2020.06.010
  45. Sharma, N., Mahapatra, T. R., Panda, S. K., & Katariya, P. (2020). Thermo-acoustic analysis of higher-order shear deformable laminated composite sandwich flat panel. Journal of Sandwich Structures and Materials, 22(5). doi: 10.1177/1099636218784846
  46. Sahu P, Sharma N, Panda SK, 2020. “Numerical Prediction and Experimental Validation of Free Vibration Responses of Hybrid Composite (Glass/Carbon/Kevlar) Curved Panel Structure.” Composite Structures 241(January): 112073. https://doi.org/10.1016/j.compstruct.2020.112073.
  47. Sahu, A. K., & Ghose, P. (2020). Computational modelling on pulverized coal combustion in a 5 kW burner to study NO reduction through Co-flow methane used as secondary fuel. Computational Thermal Sciences: An International Journal, 12(6).
  48. Behera, R. R., Das, A., Hasan, A., Pamu, D., Pandey, L. M., & Sankar, M. R. (2020). Deposition of biphasic calcium phosphate film on laser surface textured Ti–6Al–4V and its effect on different biological properties for orthopedic applications. Journal of Alloys and Compounds, 842, 155683.
  49. Behera, R. R., Das, A., Hasan, A., Pamu, D., Pandey, L. M., & Sankar, M. R. (2020). Effect of TiO2 addition on adhesion and biological behavior of BCP-TiO2 composite films deposited by magnetron sputtering. Materials Science and Engineering: C, 114, 111033.
  50. S Sukumar, SP Kar, A Swain, RK Sarangi, PC Sekha, (2020),A Combined CFD, ANFIS and NSGA-II Model for Repetitive Pulse Laser Drilling Process, Lasers in Manufacturing and Materials Processing 7 (4), 449-477.
  51. Setiawan, R., Rani, K., Cavaliere, L. P. L., Hiep, N. T., Halder, S., Raisal, I., … & Rajest, S. S. (2020). References for Shopping Online Versus in Stores What Do Customers Prefer and How Do Offline Retailers Cope with It? (Doctoral dissertation, Petra Christian University).
  52. Shah, S. K., Mishra, R., Mishra, B. S. P., & Pandey, O. (2020). Prediction of abnormal hepatic region using ROI thresholding based segmentation and deep learning based classification. International Journal of Computer Applications in Technology, 64(4), 382-392.
  53. Hotta, S. K., Sahoo, N., Mohanty, K., Kulkarni, V., 2020. Ignition timing and compression ratio as effective means for the improvement in the operating characteristics of a biogas fueled spark ignition engine, Renewable Energy, 150, pp. 854-867.
  54. Sahu, S., & Nayak, B. B. (2020). An adaptive genetic algorithm method for damage detection in structural elements. Materials Today: Proceedings, 26, 581-585.
  55. Sahu, S., Parhi, D. R., & Nayak, B. B. (2020). An Evolutionary Algorithm-Based Damage Detection in Structural Elements. In Innovative Product Design and Intelligent Manufacturing Systems (pp. 487-498). Springer, Singapore.
  56. Nayak, B. B., Sahu, S., & Das, D. (2020). Investigation on machining performance of boron carbide reinforced aluminium matrix composite during WEDM taper cutting process. Materials Today: Proceedings, 26, 932-936.
  57. Sukumar, S., Kar, S.P., Swain, A., Sarangi, R.K., Sekhar, P.C. (2020) A Combined CFD, ANFIS and NSGA-II Model for Repetitive Pulse Laser Drilling Process Lasers in Manufacturing and Materials Processing, 7 (4), pp. 449-477.
  58. Sukumar, S., Kar, S.P. (2020) A combined conduction–radiation model for analyzing the role of radiation on freezing of a biological tissue Journal of Thermal Science and Engineering Applications, 12 (1), art. no. 011015-1.
  59. Bhargava, M., Barnwal, V.K. & Chakrabarty, S., Tewari, A. & Mishra, S.K. (2020). Experimental and numerical analysis on dual phase steel (DP780) sheet forming limit and effect of microstructure evolution on formability. Journal of Materials Engineering and Performance, 29 (12), 8247-8260.
  60. Mukherjee, S., Chakrabarty, S., Mishra, P.C. & Chaudhuri, P. (2020). Transient heat transfer characteristics and process intensification with Al2O3-water and TiO2-water nanofluids: An experimental investigation. Chemical Engineering and Processing-Process Intensification, 107887.
  61. Chakrabarty, S., Bhargava, M., Narula, H.K., Pant, P. & Mishra, S.K. (2020). Prediction of strain path and forming limit curve of AHSS by incorporating microstructure evolution. The International Journal of Advanced Manufacturing Technology, 106 (11), 5085-5098.
  62. Nayak, S., Sadarang, J., Panigrahi, I., Nayak, R. K., & Maurya, M. (2020). Optimization of composite leaf spring for reduced weight and improved noise, vibration, and harshness in an electric vehicle. Noise & Vibration Worldwide, 51(7-9), 127-138.
  63. Mukherjee, S., Panda, S. R., Mishra, P. C., & Chaudhuri, P. (2020). Enhancing thermophysical characteristics and heat transfer potential of TiO2/water nanofluid. International Journal of Thermophysics, 41(12), 1-33.
  64. Naik, P., Pradhan, S., Sahoo, P., & Acharya, S. K. (2020). Effect of filler loading on mechanical properties of natural carbon black reinforced polymer composites. Materials Today: Proceedings, 26, 1892-1896.
  65. Pradhan, S., Samanta, B., & Samantaray, A. K. (2020). Influence of active steering with adaptive control law on a metro rail vehicle wheel wear and dynamic performance. Journal of Mechanical Science and Technology, 34(4), 1415-1428.
  66. Das, S., Guha, S., Das, P.P.,  Ghadai, R., (2020) Analysis of morphological, microstructural, electrochemical and nano mechanical characteristics of TiCN coatings prepared under N2 gas flow rate by chemical vapour deposition (CVD) process at higher temperature. Ceramics International, 46, 10292-10298. https://doi.org/10.1016/j.ceramint.2020.01.023
  67. Das, S., Ghadai, R.,  Guha, S.,  Sharma, A.,  Swain, B.P., (2020) Correlation of Microstructural and Mechanical Properties of CVD deposited TiAlN coatings. Arabian Journal for Science and Engineering, 45, 967-975.https://doi.org/10.1007/s13369-019-04202-0.
  68. Mishra, D., & Satapathy, S. (2020). MCDM approach for mitigation of flooding risks in Odisha (India) based on information retrieval. International Journal of Cognitive Informatics and Natural Intelligence (IJCINI), 14(2), 77-91.
  69. Mishra, D., & Satapathy, S. (2020). An Integrated SWARA, QFD, and ISM Approach for Agricultural Injuries in India. International Journal of Decision Support System Technology (IJDSST), 12(2), 1-24.
  70. Satapathy, S. (2020). An investigation on sustainable supply chain management challenges for Indian thermal power plants. International Journal of Logistics Systems and Management, 37(2), 173-224.
  71. Chanda, U.K., Padhee, S.P., Pandey, A.K., Roy, S., Pati, S., Electrodeposited Ni–Mo–Cr–P coatings for AISI 1020 steel bipolar plates, International Journal of Hydrogen Energy, 2020, 45(41), pp. 21892–21904
  72. Patro, S.S., Roy, S., Investigation of effect of residual stress and interlayer in PVD multilayer TiAlN coating by finite element analysis, International Journal of Computational Materials Science and Surface Engineering, 2020, 9(3), pp. 198–211
  73. Patro, Sudhansu Sekhar; Roy, Sudesna (2020). Investigation of effect of residual stress and interlayer in PVD multilayer TiAlN coating by finite element analysis. International Journal of Computational Materials Science and Surface Engineering. 9 (3). 198-211. 10.1504/IJCMSSE.2020.10032747
  74. Chaudhuri, S., Rathore, S.K.(2020). An analytical investigation of pressure-driven flow and heat transfer of a Sisko fluid flowing through parallel plates with viscous dissipation. Sadhana, 45(1),    DOI: 10.1007/s12046-020-01413-2
  75. Chaudhuri, S., Sahoo, S. (2020). Characterization of fully developed pressure- driven, shear -driven and combined pressure and shear driven flow of Sisko fluids through rectangular channels. Arabian Journal for Science and Engineering,  45, 5925-5947, DOI: 10.1007/s13369-020-04621-4
  76. Singhal, D., Tripathy, S., & Jena, S. K. (2020). Remanufacturing for the circular economy: Study and evaluation of critical factors. Resources, Conservation and Recycling, 156, 104681.
  77. Pothal, L. K., Tripathy, S., & Dash, A. (2020). A causal relationship among the key factors of supplier relationship management: a fuzzy DEMATEL approach. International Journal of Procurement Management, 13(3), 383-396.
  78. Mahapatra P, Mahapatra A, Tripathy S , Panda S Influence of FDI Policy on Financial Efficiency of Indian Public Insurance Companies:An Analytical Elucidation International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-9 Issue-1, May 2020
  79. Le, V.V., Huynh, T.T., Ölçer, A., Hoang, A.T., Le, A.T., Nayak, S.K., Pham, V.V. (2020). A remarkable review of the effect of lockdowns during COVID-19 pandemic on global PM emissions. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2020, DOI: 10.1080/15567036.2020.1853854
  80. Ajay Kumar, M., Khan, M. S., & Mishra, S. B. (2020). Usage of Poly-Ether-Ether-Ketone Polymer for the Biomedical Application—A Critical Review. Advances in Lightweight Materials and Structures, 371-379.
  81. Kumar, M. A., Khan, M. S., & Mishra, S. B. (2020). Effect of fused deposition machine parameters on tensile strength of printed carbon fiber reinforced PLA thermoplastics. Materials Today: Proceedings, 27, 1505-1510.
  82. Akhouri, D., Banerjee, D., & Mishra, S. B. (2020). A review report on the plating process of fused deposition modelling (FDM) built parts. Materials Today: Proceedings, 26, 2140-2142.
  83. Banerjee, D., Mishra, S. B., Khan, M. S., & Kumar, M. A. (2020). Mathematical approach for the geometrical deformation of fused deposition modelling build parts. Materials Today: Proceedings, 33, 5051-5054.
  84. Pati, P. R., Satpathy, M. P., Pattanaik, A., Mohapatra, S. K., & Mishra, S. B. (2020). Ultrasonic spot welding of Al/Mg alloys: a state-of-the-art review. Materials Today: Proceedings, 33, 4981-4987.
  85. Nanda, B. K., Das, D., Mishra, S. B., Satpathy, M. P., Routara, B. C., & Dhupal, D. (2020). Machining of borosilicate glass using Normal-Pressurized-Bed and Fluidized-bed AJM set ups. Materials Today: Proceedings, 26, 2412-2418.
  86. Khan, M. S., & Mishra, S. B. (2020). Minimizing surface roughness of ABS-FDM build parts: An experimental approach. Materials Today: Proceedings, 26, 1557-1566.
  87. Kumar, M. A., Khan, M. S., & Mishra, S. B. (2020). Effect of machine parameters on strength and hardness of FDM printed carbon fiber reinforced PETG thermoplastics. Materials Today: Proceedings, 27, 975-983.
  1. K. Parida and A. K. Rout, “Combustion of Argemone Mexicana biodiesel blends in a constant-volume DICI engine, ”published in an International Journal Bio fuels, Vol. 10, Issue-4, 2019, pp. 537-543. (Taylor & Francis).
  2. Satyananda Tripathy, M K Roul & A K Rout, “Methane-air-premixed flames impinging On    Plane surfaces,” published in Indian Academy of Sciences, Sadhana, Vol. 44, Issue-9, 2019, ID 0195. (Scopus Index)
  3. Satyananda Tripathy, M K Roul & A K Rout, “Heat transfer phenomena of premixed and diffusion flames  impinging on cylindrical surfaces, published in Journal of Engineering Science and Technology (JEST), Vol. 14, Issue-6, 2019, pp. 3234-3251. (Taylor & Francis -Scopus Index).
  4. Pandey, A., Kashyap, A. K., Parhi, D. R., & Patle, B. K. (2019). Autonomous mobile robot navigation between static and dynamic obstacles using multiple ANFIS architecture. World Journal of Engineering, 16(2), 275–286
  5. Patle, B. K., Pandey, A., Parhi, D. R. K., & Jagadeesh, A. (2019). A review: On path planning strategies for navigation of mobile robot. Defence Technology, 15(4), 582-606.
  6. Tiwari, A. K., Guha, A., & Pandey, A. (2019). Dynamic motion planning for autonomous wheeled robot using minimum fuzzy rule-based controller with avoidance of moving obstacles. International Journal of Innovative Technology and Exploring Engineering, 9(1), 4192-4198.
  7. Kumar, A., & Ghosh, S. K. (2019). Size distribution analysis of wear debris generated in HEMM engine oil for reliability assessment: A statistical approach. Measurement, 131, 412-418.
  8. Manek, B., Javia, M.S., Harichandan, A. B., & Ramani, H. (2019). A CFD based comprehensive study of coal-fired updraft gasifier in ceramic industry. International Journal of Thermal Science and Engineering Progress. Vol. 09, pp. 11-20.
  9. Chavda, A., & Harichandan, A. B. (2019). Numerical analysis of bubble hydrodynamics in a steam reactor chemical looping reforming system. Lecture Notes in Mechanical Engineering.
  10. Joisar, K., Bhoraniya, R., & Harichandan, A. B. (2019). Numerical analysis of two-phase blood flow in idealized artery with blockage. Lecture Notes in Mechanical Engineering.
  11. Banik, D., Kar, G., Debnath, B., Routara, B. C., Sahoo, A. K., Kochar, D., & others. (2019). Machining Performance Optimization During Electro Discharge Machining on Titanium (Grade 4): Application of Satisfaction Function and Distance-Based Approach. In Advances in Industrial and Production Engineering (pp. 535–542). Springer, Singapore.
  12. Banik, D., Rahul, Bhattacharjee, S., Debnath, B., Huang, H., & Routara, B. C. (2019). Study of the output responses using Utility concept coupled with Taguchi Philosophy during EDM machining of nickel-based superalloy Inconel 718. In IOP Conference Series: Materials Science and Engineering (Vol. 653). https://doi.org/10.1088/1757-899X/653/1/012023
  13. Sahu, R. K., Das, R., & Routara, B. C. (2019a). Extrusion of circular billet through circular, triangular and square multi-hole dies. International Journal of Engineering and Advanced Technology, 8(6), 4682–4685. https://doi.org/10.35940/ijeat.F9163.088619
  14. Das, S., Satpathy, M. P., Pattanaik, A., & Routara, B. C. (2019). Experimental investigation on ultrasonic spot welding of aluminum-cupronickel sheets under different parametric conditions. Materials and Manufacturing Processes, 34(15), 1689–1700. https://doi.org/10.1080/10426914.2019.1689265
  15. Debnath, B., Banik, D., Rahul, Huang, H., & Routara, B. C. (2019). Study of controlling parameters during electro-discharge machining of titanium alloy using grey relation analysis coupled with Taguchi philosophy. In IOP Conference Series: Materials Science and Engineering (Vol. 653). https://doi.org/10.1088/1757-899X/653/1/012049
  16. Nayak, B. B., & Mahapatra, S. S. (2019). Effect of deep cryogenic treatment on performance measures in wire electrical discharge machining process during taper cutting operation. International Journal of Productivity and Quality Management, 26(1), 1–20. https://doi.org/10.1504/IJPQM.2019.096969
  17. Alok P., Sahu D. (2019), Numerical Simulation of Capillary tube for Selected Refrigerants using Homogeneous Equilibrium Model, International Journal of Air-Conditioning and Refrigeration 24 (4), 1950001
  18. Aravinda Kumar, Babukiran, Sahu D. (2019), Experimentation with Flexural Properties of the Carbon Fiber Graphite Fiber and Glass Fiber Composites, International Journal of Recent Technology and Engineering (IJRTE), 8(4), 4272-4277
  19. Singhal, D., Jena, S. K., & Tripathy, S. (2019). Factors influencing the purchase intention of consumers towards remanufactured products: a systematic review and meta-analysis. International Journal of Production Research, 57(23), 7289-7299.
  20. Singhal, D., Tripathy, S., & Jena, S. K. (2019). Sustainability through remanufacturing of e-waste: Examination of critical factors in the Indian context. Sustainable Production and Consumption, 20, 128-139.
  21. Singhal, D., Tripathy, S., & Jena, S. K. (2019). Acceptance of remanufactured products in the circular economy: an empirical study in India. Management Decision.
  22. Routara BC, Nanda BK*, Das D, Satpathy MP, Singh SS, Effect of process parameters on machining performances during machining of Al7075-T6 in Electro-Discharge Machining, International Journal of Recent Technology and Engineering (IJRTE) 8:4 (2019) 10100-10104. First online published on 30-11-2019. BEIES Publishers, DOI:10.35940/ijrte.D9745.118419
  23. Das D, Routara BC*, Nanda BK, Chakraborty S, Machining Performance of Aluminium 7075 Composite: A Grey Based Taguchi Concept, International Journal of Innovative Technology and Exploring Engineering (IJITEE) 9:2 (2019) 81-92. First online published on 10-12-2019. BEIES Publishers, DOI: 10.35940/ijitee.A4964.129219
  24. Rahul., Datta, S., & Biswal, B. B. (2019). Experimental studies on electro-discharge machining of Inconel 825 super alloy using cryogenically treated tool/workpiece. Measurement, 145, 611-630.
  25. Rahul., Datta, S. (2019). Electrical Discharge Machining Performance of Deep Cryogenically Treated Inconel 825 Superalloy: Emphasis on Surface Integrity. Metallography, Microstructure, and Analysis, 8(2), 212-225.
  26. rahul., Datta, S., Biswal, B. B., & Mahapatra, S. S. (2019). Machinability analysis of Inconel 601, 625, 718 and 825 during electro-discharge machining: on evaluation of optimal parameters setting. Measurement, 137, 382-400.
  27. Mishra, D. K., Rahul, , Datta, S., Masanta, M., & Mahapatra, S. S. (2019). Through hole making by electro-discharge machining on Inconel 625 super alloy using hollow copper tool electrode. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 233(2), 348-370.
  28. Room temperature electrical properties and excitation performance of Al2O3 doped fused silica ceramics”, Materials Research Express, 6(12) (2019) , Hajra, Sugato, Sahu, Manisha, Purohit, Varsa; Mohanta, K., Panigrahi, Basanta K, Deepti, P.
  29. Studies of structural, dielectric and impedance spectroscopy of fused silica ceramics fabricated through colloidal processing” Applied Physics A 125 :369 (2019) 368-375 S. Hazra, K. Mohanta, M.Sahu, V. Purohit, R.N.P. Choudhury.
  30. Dash, S., Mehar, K., Sharma, N., Mahapatra, T. R., & Panda, S. K. (2019). Finite element solution of stress and flexural strength of functionally graded doubly curved sandwich shell panel. Earthquake and Structures, 16(1). doi: 10.12989/eas.2019.16.1.055
  31. Pandey, H. K., Hirwani, C. K., Sharma, N., Katariya, P. V., Dewangan, H. C., & Panda, S. K. (2019). Effect of nano glass cenosphere filler on hybrid composite eigenfrequency responses-An FEM approach and experimental verification. Advances in Nano Research, 7(6). doi: 10.12989/anr.2019.7.6.419
  32. Ramteke, P. M., Panda, S. K., & Sharma, N. (2019). Effect of grading pattern and porosity on the eigen characteristics of porous functionally graded structure. Steel and Composite Structures, 33(6). doi: 10.12989/scs.2019.33.6.865
  33. Sharma, N., Mahapatra, T. R., & Panda, S. K. (2019). Hygrothermal effect on vibroacoustic behaviour of higher-order sandwich panel structure with laminated composite face sheets. Engineering Structures, 197. doi: 10.1016/j.engstruct.2019.109355
  34. Sharma, N., Mahapatra, T. R., & Panda, S. K. (2019). Vibroacoustic analysis of thermo-elastic laminated composite sandwich curved panel: a higher-order FEM–BEM approach. International Journal of Mechanics and Materials in Design, 15(2). doi: 10.1007/s10999-018-9426-5
  35. Sahu P, Parida SK, Mantry S, 2019. “Effect of Agglomerated Zirconia-Toughened Mullite on the Mechanical Properties of Giant Cane Fiber Mat Epoxy Laminated Composites.” Structural Engineering and Mechanics 70(2): 233–43. https://doi.org/10.12989/sem.2019.70.2.233.
  36. Singh, N., Jha, P., Parkash, O., & Kumar, D. (2019). Recent Developments on Wear and Corrosion Behavior of Iron/Iron–Nickel Metal Matrix Composites Reinforced with Zirconia. Transactions of the Indian Institute of Metals, 72(8), 2151–2158. https://doi.org/10.1007/s12666-019-01683-3
  37. Kumari, S., Jain, R., Kumar, U., Yadav, I., Ranjan, N., Kumari, K., … & Chakravarty, D. (2019). Defect identification in friction stir welding using continuous wavelet transform. Journal of Intelligent Manufacturing, 30(2), 483-494.
  38. Aich, U., Behera, R. R., & Banerjee, S. (2019). Modeling of delamination in drilling of glass fiber-reinforced polyester composite by support vector machine tuned by particle swarm optimization. International Journal of Plastics Technology, 23(1), 77-91.
  39. Mishra, R., Mohapatra, M., Shah, S. K., & Ghosh, T. (2019). Design of a robotic arm. International Journal of Innovative Technology and Exploring Engineering, 9(1), 2639-2641. doi:10.35940/ijitee.A6122.119119
  40. Shah, S. K., & Mishra, R. (2019). Experimental validation for inverse kinematics of a five axis robotic manipulator using deep artificial neural network. International Journal of Innovative Technology and Exploring Engineering, 9(1), 3943-3946. doi:10.35940/ijitee.A5025.119119
  41. Mishra, R., & Behera, R. (2019). Design improvement of four bar linkages using different soft-computing methods. International Journal of Innovative Technology and Exploring Engineering, 9(1), 4653-4656. doi:10.35940/ijitee.A4941.119119
  42. Hotta, S. K., Sahoo, N., and Mohanty, K., 2019. Comparative assessment of a spark ignition engine fueled with gasoline and raw biogas, Renewable Energy, 134, pp.1307-1319.
  43. Hotta, S. K., Sahoo, N., Mohanty, K., 2019. Ignition Advancement Study for Optimized Characteristics of a Raw Biogas Operated Spark Ignition Engine. International Journal of Green Energy, 16(1), pp.101-113. doi:10.1080/15435075.2018.1544901.
  44. Choudhari, A. J., Hotta, S. K., Sahoo, N., Kulkarni, V., 2019. Combined Impact of Variable Compression Ratio and Re-circulated Exhaust Gas on the Performance of a Biogas Fueled Spark Ignition Engine. Journal of Renewable and sustainable energy, 11(1), pp.013104-1-15. doi: 10.1063/1.5045742.
  45. Chaudhari, A.J., Hotta, S.K., Sahoo, N. and Kulkarni, V., 2019. Effect of vertical location of the spark plug on the performance of a raw biogas-fueled variable compression ratio spark ignition engine. Energy & Environment, 30(7), pp.1313-1338.
  46. Nayak, S. K., & Mishra, P. C. (2019). Enhanced heat transfer from hot surface by nanofluid based ultrafast cooling: an experimental investigation. Journal of Enhanced Heat Transfer, 26(4).
  47. Sahu, S., Kumar, P. B., & Parhi, D. R. (2019). Analysis of hybrid CSA-DEA method for fault detection of cracked structures. Journal of Theoretical and Applied Mechanics, 57.
  48. Kar, S.P., Rath, P. (2019) A continuum mixture model for moving pulsed laser phase change processInternational Journal of Thermal Sciences, 140, pp. 388-396.
  49. Sukumar, S., Kar, S.P.(2019) Numerical analysis of an enhanced cooling rate cryopreservation process in a biological tissue Journal of Thermal Biology, 81, pp. 146-153.
  50. Sukumar, S., Kar, S.P. (2019) A numerical approach for a comparative study of laser drilling process under single and repetitive pulse Heat Transfer – Asian Research, 48 (1), pp. 300-322.
  51. Barnwal, V.K., Chakrabarty, S. Tewari, A., Narasimhan, K. & Mishra, S.K. (2019). Influence of Single-Point Incremental Force Process Parameters on Forming Characteristics and Microstructure Evolution of AA-6061 Alloy Sheet, Journal of Materials Engineering and Performance. 28 (11), 7141-7154.
  52. Nayak, S., Nayak, R. K., Panigrahi, I., & Sahoo, A. K. (2019). Tribo-mechanical responses of glass fiber reinforced polymer hybrid nanocomposites. Materials Today: Proceedings, 18, 4042-4047.
  53. Pradhan, S., & Samantaray, A. K. (2019). A recursive wheel wear and vehicle dynamic performance evolution computational model for rail vehicles with tread brakes. Vehicles, 1(1), 88-115.
  54. Pradhan, S., Samantaray, A. K., & Bhattacharyya, R. (2019). Multi-step wear evolution simulation method for the prediction of rail wheel wear and vehicle dynamic performance. Simulation, 95(5), 441-459.
  55.  Guha, S.,  Das, P.P., S. Chakraborty, (2019) Improvement in the performance with less stiff air layer formation around the rubber tube-pasted grinding wheel. Proceedings of the Institution of Mechanical Engineers Part C, Journal of Mechanical Engineering Science, 233, 5175-5189.  https://doi.org/10.1177/0954406219844534.
  56. Chanda, U.K., Padhee, S.P., Pathak, A.D., Roy, S., Pati, S., Effect of Cr content on the corrosion resistance of Ni–Cr–P coatings for PEMFC metallic bipolar plates, Materials for Renewable and Sustainable Energy, 2019, 8(4), 20
  57. Das, R.K., Sahoo, A.K., Kumar, R., …Mishra, P.C., Mohanty, T., MQL assisted cleaner machining using PVD TiALN coated carbide insert: Comparative assessment, Indian Journal of Engineering and Materials Sciences, 2019, 26(5-6), pp. 311–325
  58. Tripathy, S., Behera, A., Pati, S., Roy, S., Corrosion resistant nickel coating on mild steel by cold gas dynamic spraying, Materials Today: Proceedings, 2019, 46, pp. 4395–4399
  59. Chaudhuri,S.,Chakraborty, P., Das, B., Singh, R.K., Flow analysis of multilayer gravity-driven Sisko fluid over a flat inclined plane. Arabian Journal for Science and Engineering, 44, 8081-8093,    DOI: 10.1007/s13369-019-03995-4
  60. Singhal, D., Jena, S. K., & Tripathy, S. (2019). Factors influencing the purchase intention of consumers towards remanufactured products: a systematic review and meta-analysis. International Journal of Production Research, 57(23), 7289-7299.
  61. Singhal, D., Tripathy, S., & Jena, S. K. (2019). Sustainability through remanufacturing of e-waste: Examination of critical factors in the Indian context. Sustainable Production and Consumption, 20, 128-139.
  62. Singhal, D., Tripathy, S., & Jena, S. K. (2019). Acceptance of remanufactured products in the circular economy: an empirical study in India. Management Decision.
  63. Nayak, S., Tripathy, S., & Dash, A. (2019). Non-technical skill development strategy to enhance safety performance of railway system: an interpretive structural modelling approach. International Journal of Business Excellence, 19(2), 168-188.
  64. Nayak, S.K., Mishra, P.C., Noor, M.M. (2019). Simultaneous reduction of nitric oxide and smoke opacity in TDI dual fuel engine fuelled with calophyllum-diesel blends and waste wood chip gas for modified inlet valve and injector nozzle geometry. Energy, 2019, 189, 116238, DOI: 10.1016/j.energy.2019.116238
  65. Nayak, S.K., Mishra, P.C., Noor, M.M., Hagos, F.Y., Kadirgama, K., Mamat, R. (2019). The performance of turbocharged diesel engine with injected calophyllum inophyllum methyl ester blends and inducted babul wood gaseous fuels. Fuel, 2019, 257, 116060, DOI: 10.1016/j.fuel.2019.116060, DOI: 10.1016/j.fuel.2019.116060
  66. Nayak, S.K., Chandra Mishra, P. (2019). Combustion characteristics, performances and emissions of a biodiesel-producer gas dual fuel engine with varied combustor geometry. Energy, 2019, 168, pp. 585–600, DOI: 10.1016/j.energy.2018.11.116
  67. Nayak, S.K., Mishra, P.C. (2019). Achieving high performance and low emission in a dual fuel operated engine with varied injection parameters and combustion chamber shapes. Energy Conversion and Management, 2019, 180, pp. 1–24, DOI: 10.1016/j.enconman.2018.10.091
  68. Nayak, S.K., Nayak, B., Mishra, P.C., Noor, M.M., Nanda, S. (2019). Effects of biodiesel blends and producer gas flow on overall performance of a turbocharged direct injection dual-fuel engine. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2019, DOI: 10.1080/15567036.2019.1694101
  69. Mishra, S. B., Acharya, E., Banerjee, D., & Khan, M. S. (2019). An Experimental Investigation of surface roughness of FDM Build parts by Chemical Misting. In IOP Conference Series: Materials Science and Engineering (Vol. 653, No. 1, p. 012043). IOP Publishing.
  70. Pattanaik, A., Mukherjee, M., & Mishra, S. B. (2019). Influence of curing condition on thermo-mechanical properties of fly ash reinforced epoxy composite. Composites Part B: Engineering, 176, 107301.
  71. Nanda, B. K., Das, D., Nayak, R. K., Mishra, S. B., Routara, B. C., & Dhupal, D. (2019). Fluidised Bed Hot Abrasive Jet Machining of Borosilicate Glass with Zircon Sand. Materials Today: Proceedings, 18, 2993-3000.
  72. Haque, M. E., Banerjee, D., Mishra, S. B., & Nanda, B. K. (2019). A numerical approach to measure the surface roughness of FDM build part. Materials Today: Proceedings, 18, 5523-5529.
  73. Mohapatra, S. K., Mishra, S. B., Joshi, K. K., & Pradhan, S. (2019). Effect of the hot deformation on mechanical and wear characteristics of the P/M AMC. Materials Today: Proceedings, 18, 5040-5047.
  1. K. Parida, H. Joardar, A. K. Rout, I. Routray & B. P. Mishra “Multiple response optimizations to improve performance and reduce emissions Argemone Mexicana biodiesel –diesel blends in a VCR engines,” published in Applied Thermal Engineering, Vol. 148, 2018, pp. 1454-1466. (Elsevier)
  2. S S Singh, K B Sahu & A K Rout, “Experimental Investigation of Thermal Efficiency of boiling pot with modified surface geometry,” published in an International journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8, Issue-1, Feb.2018, pp. 479-486. ISSN (P): 2249-6890, ISSN (E): 2249-8001.
  3. S S Singh, K B Sahu & A K Rout, “Experimental Investigation on effect of SKIRT Arrangement on modified boiling pot,” published in an International journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8, Issue-4, Aug. 2018, pp. 995-1004. ISSN (P): 2249-6890, ISSN (E): 2249-8001. (Scopus Index)
  4. S S Mohanty, A K Rout, D K Jesthi, B C Routara & R K Nayak, “Evaluation of Composite Mechanical and wear performance of glass/carbon fiber reinforced polymer hybrid,” published in Materials Today: Proceedings, Vol. 8, 2018, pp. 19854-19861. (Elsevier-Scopus Index)
  5. Kumar, A., Panda, S., Kumar, A., & Narsaria, V. (2018). Performance of a graphite wafer-reinforced viscoelastic composite layer for active-passive damping of plate vibration. Composite Structures, 186, 303-314.
  6. Kumar, A., Panda, S., Narsaria, V., & Kumar, A. (2018). Augmented constrained layer damping in plates through the optimal design of a 0-3 viscoelastic composite layer. Journal of Vibration and Control, 24(23), 5514-5524.
  7. Panda, S., & Kumar, A. (2018). A design of active constrained layer damping treatment for vibration control of circular cylindrical shell structure. Journal of Vibration and Control, 24(24), 5811-5841.
  8. Panda, A., Sahoo, A. K., Panigrahi, I., & Rout, A. K. (2018). Investigating machinability in hard turning of AISI 52100 bearing steel through performance measurement: QR, ANN and GRA study. International Journal of Automotive and Mechanical Engineering, 15, 4935-4961.
  9. Patro, P., Rout, A., & Barik, A. (2018). Numerical heat transfer prediction for laminar flow in a circular pipe with a 90 bend. Journal of The Institution of Engineers (India): Series C, 99(3), 323-327.
  10. Kumar, A., & Ghosh, S. K. (2018). Size distribution analysis of wear particles in the transmission system of mining equipment. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(8), 921-926.
  11. Sheth, M. M., Roy, A., & Harichandan, A. B. (2018). Performance of fuel reactor in a chemical looping combustion system with different oxygen carriers. International Journal of Thermal Science and Engineering Progress. Vol. 05, pp. 33-38.
  12. Mehata, P., Jhala, R., & Harichandan A.B. (2018). Design and mathematical modelling of mixed mode solar dryer applicable for small scale application. International Journal of Engineering Research in Mechanical and Civil Engineering. Vol. 03 (2), pp. 173-177.
  13. Parekh, C., Roy, A., & Harichandan, A.B. (2018). Numerical simulation of incompressible gusty flow past a circular cylinder. Alexandria Journal of Engineering. Vol. 57 (4), pp. 3321-3332.
  14. Singh, N., Routara, B. C., & Das, D. (2018). Study of machining characteristics of Inconel 601in EDM using RSM. In Materials Today: Proceedings (Vol. 5). https://doi.org/10.1016/j.matpr.2017.11.590
  15. Panpalia, N., Singh, M. M., Mandal, N., Choudhary, R., & Routara, B. C. (2018). Comparison of machining characteristics of Inconel 601 with Brass and Graphite electrode in EDM using Response Surface Methodology (RSM). In IOP Conference Series: Materials Science and Engineering (Vol. 455, p. 12080).
  16. Mishra, B. P., & Routara, B. C. (2018). Impact of induction hardened workpiece hardness on EDM performance. Materials and Manufacturing Processes, 33(6), 626–633.
  17. Mohanty, S., Mishra, A., Nanda, B. K., & Routara, B. C. (2018). Multi-objective parametric optimization of nano powder mixed electrical discharge machining of AlSiCp using response surface methodology and particle swarm optimization. Alexandria Engineering Journal, 57(2), 609–619.
  18. Swarup Mohanty, S., Kumar Rout, A., Kumar Jesthi, D., Chandra Routara, B., & Kumar Nayak, R. (2018). Evaluation of mechanical and wear performance of glass/carbon fiber reinforced polymer hybrid composite. Materials Today: Proceedings, 5(9), 19854–19861. https://doi.org/10.1016/j.matpr.2018.06.350
  19. Das, D., Mishra, P. C., Singh, S., Chaubey, A. K., & Routara, B. C. (2018). Machining performance of aluminium matrix composite and use of wpca based taguchi technique for multiple response optimization. International Journal of Industrial Engineering Computations, 9(4). https://doi.org/10.5267/j.ijiec.2017.10.001
  20. Shabar, R. Praveen (2018), A Case Study on Solar Vapour Absorption Refrigeration System, International Journal of Engineering and Technology (UAE) 7 (4.5), 44-47
  21. Das D*, Mishra PC, Singh S, Chaubey AK and Routara BC, Machining performance of aluminium matrix composite and use of WPCA based Taguchi technique for multiple response optimization. International Journal of Industrial Engineering and Computations 9:4 (2018), pp. 551-564. DOI: 10.5267/j.ijiec.2017.10.001 Growing Science
  22. Rahul., Mishra, D. K., Datta, S., & Masanta, M. (2018). Effects of tool electrode on EDM performance of Ti-6Al-4V. Silicon, 10(5), 2263-2277.
  23. Rahul., Datta, S., & Masanta, M. (2018). Surface integrity and metallurgical characteristics of the EDMed work surfaces of A2 tool steel (SAE 304SS), Inconel 601 and Ti-6Al-4V: A comparative analysis. Silicon, 10(4), 1557-1572.
  24. Upadhyay, C., Rahul, Datta, S., Mahapatra, S. S., & Biswal, B. B. (2018). An experimental investigation on electro discharge machining of Inconel 601. International Journal of Industrial and Systems Engineering, 29(2), 223-251.
  25. Rahul., Datta, S., Masanta, M., Biswal, B. B., & Mahapatra, S. S. (2018). Analysis on surface characteristics of electro-discharge machined Inconel 718. International Journal of Materials and Product Technology, 56(1-2), 135-168.
  26. Patel, J. K., & Natarajan, G. (2018). A cost‐effective curvature calculation approach for interfacial flows on unstructured meshes. International Journal for Numerical Methods in Fluids, 88(7), 347-362.
  27. Patel, J. K., & Natarajan, G. (2018). Diffuse interface immersed boundary method for multi-fluid flows with arbitrarily moving rigid bodies. Journal of Computational Physics, 360, 202-228.
  28.  “Processing, dielectric and impedance spectroscopy of lead free BaTiO3-BiFeO3-CaSnO3” Journal of Alloys and Compounds 766 (2018) 25-32 S. Sahoo, S. Hazra, M. De, K. Mohanta, R.N.P. Choudhury.
  29. “A Comparative study on mechanical properties of Al-SiO2 composites fabricated using rice husk silica in crystalline and amorphous form as reinforcement” Materialstoday proceedings 5 2 (2018) 8181-8192 A. Pattanayak, N. Madhu, A. Panda, M. K. Sahoo, K. Mohanta .
  30. Singh, S. S., Sahu, K. B. (2018). Experimental Investigation of Thermal Efficiency of Boiling Pot with Modified Surface Geometry, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8(1), 479-486.
  31. Bisoi, Susil Kumar, Sahu, K. B., Nayak, Swarup Kumar, Mishra, P. C. (2018). Influence of Storage Period on the Thermal and Oxidation Stability of Jatropha Biodiesel and their Blends, International Journal of Mechanical Engineering and Technology, 9 (13), 2018, pp. 918-927.
  32. Singh, S. S., Sahu, K. B., Rout, A. K. (2018). Experimental Investigation on Effect of Skirt arrangement on Modified Boiling Pot, International Journal of Mechanical and Production Engineering Research Development (IJMPERD), 8(4), 1027-1036.
  33. Dash, S., Mehar, K., Sharma, N., Mahapatra, T. R., & Panda, S. K. (2018). Modal analysis of FG sandwich doubly curved shell structure. Structural Engineering and Mechanics, 68(6). doi: 10.12989/sem.2018.68.6.721
  34. Sharma, N., Mahapatra, T. R., & Panda, S. K. (2018). Vibro-acoustic analysis of laminated composite plate structure using structure-dependent radiation modes: An experimental validation. Scientia Iranica, 25(5B). doi: 10.24200/sci.2018.20420
  35. Sharma, N., Mahapatra, T. R., Panda, S. K., & Mehar, K. (2018). Evaluation of vibroacoustic responses of laminated composite sandwich structure using higher-order finite-boundary element model. Steel and Composite Structures, 28(5). doi: 10.12989/scs.2018.28.5.629
  36. Sharma, N, Mahapatra, T. R., Panda, S. K., & Hirwani, C. K. (2018). Acoustic Radiation and Frequency Response of Higher-Order Shear Deformable Multilayered Composite Doubly Curved Shell Panel – An Experimental Validation. Applied Acoustics, 133, 38–51.
  37. Sharma, Nitin, Mahapatra, T. R., & Panda, S. K. (2018). Numerical analysis of acoustic radiation properties of laminated composite flat panel in thermal environment: A higher-order finite-boundary element approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(18), 3235–3249. doi: 10.1177/0954406217735866
  38. Sharma, Nitin, Mahapatra, T. R., & Panda, S. K. (2018). Numerical analysis of acoustic radiation responses of shear deformable laminated composite shell panel in hygrothermal environment. Journal of Sound and Vibration, 431, 346–366. doi: 10.1016/j.jsv.2018.06.007
  39. Sharma, Nitin, Mahapatra, T. R., & Panda, S. K. (2018). Thermoacoustic behavior of laminated composite curved panels using higher-order finite-boundary element model. International Journal of Applied Mechanics, 10(2), 1–27. doi: 10.1142/S1758825118500175
  40. DEWANGAN, A. K., PANIGRAHI, I., PARAMGURU, R., & GHOSE, P. (2018) EXPERIMENTAL INVESTIGATION ON LOW TEMPERATURE GLOW PLASMA BASED EXHAUST SEPARATION AND PURIFICATION FOR STATIC AND DYNAMIC APPLICATIONS OF INTERNAL COMBUSTION ENGINE.
  41. Behera, R. R., Hasan, A., Sankar, M. R., & Pandey, L. M. (2018). Laser cladding with HA and functionally graded TiO2-HA precursors on Ti–6Al–4V alloy for enhancing bioactivity and cyto-compatibility. Surface and Coatings Technology, 352, 420-436.
  42. Behera, R. R., Das, A., Pamu, D., Pandey, L. M., & Sankar, M. R. (2018). Mechano-tribological properties and in vitro bioactivity of biphasic calcium phosphate coating on Ti-6Al-4V. Journal of the Mechanical Behavior of Biomedical Materials, 86, 143-157.
  43. Das, A., Chikkala, A. K., Bharti, G. P., Behera, R. R., Mamilla, R. S., Khare, A., & Dobbidi, P. (2018). Effect of thickness on optical and microwave dielectric properties of Hydroxyapatite films deposited by RF magnetron sputtering. Journal of Alloys and Compounds, 739, 729-736.
  44. Behera, R. R., Sankar, M. R., Baruah, P. K., Sharma, A. K., & Khare, A. (2018). Experimental investigations of nanosecond-pulsed Nd: YAG laser beam micromachining on 304 stainless steel. Journal of Micromanufacturing, 1(1), 62-75.
  45. Hotta, S. K., Sahoo, N., Mohanty, K. and Mahanta, P., 2018. Effect of compression ratio on the performance of a constant speed spark ignition engine operating on raw biogas. Journal of Energy and Environmental Sustainability, 5, pp. 53-57.
  46. Nayak, S. K., Mishra, P. C., Ukamanal, M., & Chaini, R. (2018). Experimental result on heat transfer during quenching of hot Steel plate by spray impingement. Heat Transfer Engineering, 39(9), 739-749.
  47. Nayak, S. K., & Mishra, P. C. (2018). Response surface method-based optimisation of spray parameters during impingement cooling of hot steel in rolling. International Journal of Process Management and Benchmarking, 8(2), 125-141.
  48. Sahu, S., Kumar, P. B., & Parhi, D. R. (2018). A hybridised CSAGA method for damage detection in structural elements. Mechanics & Industry, 19(4), 407.
  49. Parhi, D. R., & Sahu, S. (2018). Clonal fuzzy intelligent system for fault diagnosis of cracked beam. International Journal of Damage Mechanics, 27(6), 840-858.
  50. Sahu, J., Chakrabarty, S., Raghavan, R., Mishra, S.K. (2018). Investigations of size effect on formability and microstructure evolution in SS304 thin foils. The Journal of Strain Analysis for Engineering Design, 53 (7), 517-528.
  51. Bhargava, M. Chakrabarty, S., Barnwal, V.K., Tewari, A. & Mishra, S.K. (2018). Effect of microstructure evolution during plastic deformation on the formability of Transformation Induced Plasticity and Quenched & Partitioned AHSS. Materials & Design, 152, pp. 65-77.
  52. Tripathy, A.K., Ray, S., Sahoo, S.S. & Chakrabarty, S. (2018).Structural analysis of absorber tube used in parabolic trough solar collector and effect of materials on its bending: A computational study.Solar Energy, 163, 471-485
  53. Polatidis, E., Hsu, W-N., Šmíd, M., Panzner, T., Chakrabarty, S., Pant, P. & Van Swygenhoven, H. (2018). Suppressed martensitic transformation under biaxial loading in low stacking fault energy metastable austenitic steels. Scripta Materialia, 147, 27-32.
  55. Barnwal, V.K. Chakrabarty, S., Tewari, A., Narasimhan, K. & Mishra, S.K. (2018). Forming behavior and microstructural evolution during single point incremental forming process of AA-6061 aluminum alloy sheet. The International Journal of Advanced Manufacturing Technology, 95, 1-4.
  56. Nayak, S., Sadarang, J., Panigrahi, I., & Nayak, R. K. (2018). Development of carbon/glass fibre reinforcement polymer hybrid composite through modeling and simulation. Materials Today: Proceedings, 5(9), 17838-17844.
  57. Pradhan, S., Samantaray, A. K., & Bhattacharyya, R. (2018). Prediction of railway wheel wear and its influence on the vehicle dynamics in a specific operating sector of Indian railways network. Wear, 406, 92-104.
  58. Pradhan, S., & Samantaray, A. K. (2018). Integrated modeling and simulation of vehicle and human multi-body dynamics for comfort assessment in railway vehicles. Journal of Mechanical Science and Technology, 32(1), 109-119.
  59. Guha, S., Das, S., Bandyopadhyay, A., Das, S., Swain,B.P., (2018) Investigation of Mechanical Properties of CVD grown Titanium Silicon Nitride Thin Films under Reduced Atmosphere. Applied Physics A, 124, 35-43. https://doi.org/10.1007/s00339-017-1455-7.
  61. Guha, S., Das, S., Bandyopadhyay, A., Das, S., Swain, B.P.  (2018) Investigation of structural network and mechanical properties of Titanium Silicon Nitride (TiSiN) thin films, Journal of Alloys and Compounds. 731, 347-353.  https://doi.org/10.1016/j.jallcom.2017.09.340
  62. K. Chanda, A. Behera, S. Roy, S. Pati, Evaluation of Ni-Cr-P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell, Int. Journal of Hydrogen Energy, vol. 43(27), Dec 2018.
  63. Mandal, U. K. Chandda, S. Roy, A Review of Corrosion Resistance Methods on Stainless Steel Bipolar plate, Materials Today: Proceedings, vol. 5(9), Jan 2018.
  64. Chaudhuri, S., Rathore, S.(2018). Semi analytical solution of  heat transfer of MHD third grade  fluids flowing through parallel plates with viscous dissipation. Journal of Thermal Science and Engineering Applications,11(2),    DOI: 10.1115/1.4041682
  65. Chaudhuri, S., Das, P.K., Semi-analytical soluton of the heat transfer including viscous dissipation in the steady flow ofa  Sisko fluid in cylindrical tubes. Journal of Heat Transfer, 140(7),071701(9 pages),https://doi.org/10.1115/1.4039352
  66. Chaudhuri, S., Sahoo,S. (2018). Effect of the aspect ratio on flow characteristics of magnetohydrodynamic ( MHD) third grade fluid flow through a rectangular channel. Sadhana, 43(7),     DOI: 10.1007/s12046-018-0855-5
  67. Nayak, S., Tripathy, S., & Dash, A. (2018). Role of non technical skill in human factor engineering: a crucial safety issue in Indian Railway. International Journal of System Assurance Engineering and Management, 9(5), 1120-1136.
  68. Biswal, J. N., Muduli, K., Satapathy, S., & Tripathy, S. (2018). A framework for assessment of SSCM strategies with respect to sustainability performance: an Indian thermal power sector perspective. International Journal of Procurement Management, 11(4), 455-471.
  69. Dash, A., Das, R. K., Tripathy, S., & Nayak, S. (2018). Supply chain coordination voyage towards supplier relationship management: a critical review. International Journal of Procurement Management, 11(5), 586-607.
  70. Batabyal, A., Nayak, R. K., & Tripathy, S. (2018). Evaluation of mechanical properties of glass fibre and carbon fibre reinforced polymer composite. Journal of Communication Engineering & Systems, 8(2), 66-74.
  71. Mishra, P.C., Nayak, S.K. (2018). Pre-and post-mixed hybrid biodiesel blends as alternative energy fuels-an experimental case study on turbo-charged direct injection diesel engine. Energy, 2018, 160, pp. 910–923, DOI: 10.1016/j.energy.2018.07.071
  72. Satpathy, M. P., Mishra, S. B., & Sahoo, S. K. (2018). Ultrasonic spot welding of aluminum-copper dissimilar metals: a study on joint strength by experimentation and machine learning techniques. Journal of Manufacturing Processes, 33, 96-110.
  73. Mishra, S. B., Khan, M. S., Acharya, E., & Nanda, D. (2018). Parametric Appraisal of Wear Behavior of Coated FDM Build parts using Firefly Algorithm. Materials Today: Proceedings, 5(9), 17968-17973.
  74. Khan, M. S., Mishra, S. B., Kumar, M. A., & Banerjee, D. (2018). Optimizing surface texture and coating thickness of nickel coated ABS-3D parts. Materials Today: Proceedings, 5(9), 19011-19018.
  75. Mishra, S. B., & Mahapatra, S. S. (2018). An experimental investigation on strain controlled fatigue behaviour of FDM build parts. International Journal of Productivity and Quality Management, 24(3), 323-345.
  1. K. Rout, K. P. Maity and S. K. Sahoo, FEM modeling of extrusion of square billet to square product through cosine dies, published in the Journal of Institution of Engineers (India), Series C (Springer), Vol. 98, Issue 2, April 2017, pp. 91-96. [Print ISSN=2250-0545, Online ISSN=2250-0553]
  2. K. Parida and A. K. Rout, “Investigation of performance and emission analysis of Argemone Mexicana biodiesel blends as a fuel in a DICI engine at part load conditions,” published in an International Journal for Energy Sources, Part A:Recovery, Utilization, and Environmental Effects, Vol. 39, Issue-6, 2017, pp. 623-629.
  3. K. Parida and A. K. Rout, “Combustion analysis of Argemone Mexicana biodiesel blends,” published in an International Journal for Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 39, Issue-7, 2017, pp. 698-705. (Taylor & Francis)
  4. Joardar, M. K. Parida, A. K. Rout and I. Routaray, “Combustion analysis of Argemone Mexicana biodiesel blends,” published in Iranian Journal of Energy and Environment, Vol. 8, Issue-3, 2017, pp. 181-188.
  5. Kumar, A., & Panda, S. (2017). Optimal damping in circular cylindrical sandwich shells with a three-layered viscoelastic composite core. Journal of Vibration and Acoustics, 139(6).
  6. Panda, A., Sahoo, A. K., & Rout, A. K. (2017). Machining performance assessment of hardened AISI 52100 steel using multilayer coated carbide insert. Journal of Engineering Science and Technology, 12(6), 1488-1505.
  7. Panda, A., Sahoo, A., & Rout, A. (2017). Statistical regression modeling and machinability study of hardened AISI 52100 steel using cemented carbide insert. International Journal of Industrial Engineering Computations, 8(1), 33-44.
  8. Limbasiya, N.M., Roy, A., & Harichandan, A.B. (2017). Numerical simulation of heat transfer for microelectronic heat sinks with different fin geometries in tandem and staggered arrangements. International Journal of Thermal Science and Engineering Progress. Vol. 04, pp. 11-17.
  9. Limbasiya, N.M., & Harichandan, A.B. (2017). Enhancement of heat transfer in heat sinks using aerodynamically shaped fins. IEEE Xplore. DOI: 10.1109/I2CT.2017.8226235.
  10. Sheth, M.M., & Harichandan A.B. (2017). Effect of oxygen carrier particle size on the hydrodynamics of fuel reactor in a chemical looping combustion system. International Journal of Advance Research in Science and Engineering. Vol. 06 (01), pp. 174-184.
  11. Limbasiya, N.M., & Harichandan A.B. (2017). Effect of staggered fins on heat transfer and pressure drop in heatsinks. International Journal of Advanced Technology in Engineering and Science. Vol. 05 (01), pp. 192-197.
  12. Dangi, D.R., Thaker, P.B., & Harichandan, A.B. (2017). Flow Analysis of Rocket Nozzle Using Method of Characteristics, International Journal of Innovative Research in Science and Engineering. Vol. 03 (01), pp. 181-188.
  13. Mishra, B. P., & Routara, B. C. (2017a). An experimental investigation and optimisation of performance characteristics in EDM of EN-24 alloy steel using Taguchi Method and Grey Relational Analysis. In Materials Today: Proceedings (Vol. 4). https://doi.org/10.1016/j.matpr.2017.07.075
  14. Mishra, B. P., & Routara, B. C. (2017b). Comparative Analysis of the Performance Effectiveness of Sinking Electrical Discharge Machining (EDM) process with Enhancement in Hardness of the parent EN-31 Alloy Steel. In Materials Today: Proceedings (Vol. 4). https://doi.org/10.1016/j.matpr.2017.06.355
  15. Rana, B. K., Das, A. K., & Das, P. K. (2017). Study of interaction pattern between bubbles at three inline orifices in a submerged pool. Chemical Engineering Science, 168, 41-54.
  16. Rana, B. K., Das, A. K., & Das, P. K. (2017). Towards the understanding of bubble-bubble interaction upon formation at submerged orifices: A numerical approach. Chemical Engineering Science, 161, 316-328.
  17. Nayak, B. B., & Mahapatra, S. S. (2017). An intelligent approach for multi-response optimisation of WEDM parameters. International Journal of Industrial and Systems Engineering, 25(2), 197–227. https://doi.org/10.1504/IJISE.2017.081518
  18. Yeshashwini T., Sahu D. (2017), Study on Catalytic Bio-Digestion of Sugarcane Bagasse Fiber, Research Journal of Pharmaceutical, Biological and Chemical Sciences, 8 (1), 1502
  19. Rahul., Abhishek, K., Datta, S., Biswal, B. B., & Mahapatra, S. S. (2017). Machining performance optimization for electro-discharge machining of Inconel 601, 625, 718 and 825: an integrated optimization route combining satisfaction function, fuzzy inference system and Taguchi approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(9), 3499-3527.
  20. Rahul., Datta, S., Biswal, B. B., & Mahapatra, S. S. (2017). A novel satisfaction function and distance-based approach for machining performance optimization during electro-discharge machining on super alloy Inconel 718. Arabian Journal for Science and Engineering, 42(5), 1999-2020.
  21. Rahul., Datta, S., Biswal, B. B., & Mahapatra, S. S. (2017). Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: emphasis on surface integrity and metallurgical characteristics. Journal of Manufacturing Processes, 26, 188-202.
  22. Rahul, Abhishek, K., Datta, S., Biswal, B. B., & Mahapatra, S. S. (2017). Machining performance optimisation during EDM of Inconel 718: a case experimental investigation. International Journal of Productivity and Quality Management, 21(4), 460-489.
  23. Patel, J. K., & Natarajan, G. (2017). A novel consistent and well-balanced algorithm for simulations of multiphase flows on unstructured grids. Journal of computational physics, 350, 207-236.
  24. Singh, S. S., Sahu, K. B. (2017). Experimental Investigation for Enhancement of Boiling Heat Transfer of Pots having Surface Modification with Flue Tube, Journal of Chemical and Pharmaceutical Sciences, Special Issue, 127-130.
  25. Sahu, K. B., Puthal, Manas Kumar, Mohapatra, Natabara. (2017). Analysis of natural convection of air in triangular enclosures of different inclination angles, JP Journal of Heat and Mass Transfer, 14 (2), 187-199.
  26. Bisoi, Susil Kumar, Nayak, Swarup Kumar, Sahu, K. B., Mishra, P. C. (2017). Experimental Evaluation on Jatropha Biodiesel Blends as an Alternative Fuel for Engine Application, International Journal of Mechanical Engineering and Technology, 8 (8), 1254-1262.
  27. Sharma, Nitin, Mahapatra, T. R., & Panda, S. K. (2017). Vibro-acoustic analysis of un-baffled curved composite panels with experimental validation. Structural Engineering and Mechanics, 64(1), 93–107.
  28. Sharma, N, Mahapatra, T. R., & Panda, S. K. (2017). Numerical study of vibro-acoustic responses of un-baffled multi-layered composite structure under various end conditions and experimental validation. Latin American Journal of Solids and Structures, 14(8), 1547–1568.
  29. Sharma, Nitin, Mahapatra, T. R., & Panda, S. K. (2017). Vibro-acoustic behaviour of shear deformable laminated composite flat panel using BEM and the higher order shear deformation theory. Composite Structures, 180, 116–129. doi: 10.1016/j.compstruct.2017.08.012
  30. Jha, P., Gautam, R. K., & Tyagi, R. (2017a). Effect of Reinforcement Content and Technological Parameters on the Properties of Cu-4 wt.% Ni-TiC Composites. Journal of Materials Engineering and Performance, 26(10), 5126–5136. https://doi.org/10.1007/s11665-017-2939-5
  31. Jha, P., Gautam, R. K., & Tyagi, R. (2017b). Friction and wear behavior of Cu–4 wt.%Ni–TiC composites under dry sliding conditions. Friction, 5(4), 437–446. https://doi.org/10.1007/s40544-017-0157-7
  32. Kesharwani, R. K., Basak, S., Panda, S. K., & Pal, S. K. (2017). Improvement in limiting drawing ratio of aluminum tailored friction stir welded blanks using modified conical tractrix die. Journal of Manufacturing Processes, 28, 137-155.
  33. Behera, R. R., Babu, P. M., Gajrani, K. K., & Sankar, M. R. (2017). Fabrication of micro-features on 304 stainless steel (SS-304) using Nd: YAG laser beam micro-machining. International Journal of Additive and Subtractive Materials Manufacturing, 1(3-4), 338-359.
  34. Mohapatro, G., Mishra, R., & Kamlesh, S. S. (2017). Preliminary testing and analysis of an optimized robotic arm, for CT image guided medical procedures. International Journal of Mechanical and Production Engineering Research and Development, 7(6), 239-246. doi:10.24247/ijmperddec201726
  35. Mohapatra, S. K., & Maity, K. (2017). Synthesis and characterisation of hot extruded aluminium-based MMC developed by powder metallurgy route. International Journal of Mechanical and Materials Engineering, 12(1), 1-9.
  36. Chandra Mishra, P., Kumar Nayak, S., & Ukamanal, M. (2017). Effect of impingement density and nozzle to target distance on spray cooling of steel plate—an experimental investigation. Heat Transfer Engineering, 38(13), 1198-1208.
  37. Sahu, S., Kumar, P. B., & Parhi, D. R. (2017). Intelligent hybrid fuzzy logic system for damage detection of beam-like structural elements. Journal of Theoretical and Applied Mechanics, 55(2), 509-521.
  38. Sahu, S., Kumar, P. B., & Parhi, D. R. (2017). Design and development of 3-stage determination of damage location using Mamdani-adaptive genetic-Sugeno model. Journal of Theoretical and Applied Mechanics, 55(4), 1325-1339.
  39.  Panda, S. R., Senapati, A. K., & Mishra, P. C. (2017). Multi-regression prediction model for surface roughness and tool wear in turning novel aluminum alloy (LM6)/fly ash composite using response surface and central composite design methodology Pages. International Journal of Industrial Engineering Computations, 8(1), 1-18.
  40. Pradhan, S., Samantaray, A. K., & Bhattacharyya, R. (2017). Application of semi-hertzian approach to predict the dynamic behavior of railway vehicles through a wear evolution model. Journal of Friction and Wear, 38(6), 437-443.
  41. Das, S., Guha, S.,  Ghadai, R.,  Kumar, D. Swain, B.P., (2017) Structural and mechanical properties of CVD deposited titanium aluminium nitride (TiAlN) thin films. Applied Physics A, 123, 412-416. https://doi.org/10.1007/s00339-017-1032-0.
  42. Pradhan, J.,  Guha,S., Pradhan, B.B., (2017) Review on process parametric optimization of wire electric discharge machining. International Journal on Design & Manufacturing Technologies, 11, 1-8.
  43. Muduli, K., Biswal, J. N., Satapathy, S., Barve, A., & Tripathy, S. (2017). Investigation of influential factors of green supply chain management in Indian mining industries: an empirical study. International Journal of Business Excellence, 12(3), 351-375.
  44. Panigrahi, J. K., Tripathy, S., & Das, B. (2017). Thematic analysis of service innovation taxonomy within supply network, creating value for the system. International Journal of Mechanical Engineering and Technology, 8(9), 57-69.
  45. Panigrahi, J. K., Tripathy, S., & Das, B. (2017). Linkages between innovation, service, and network within supply chain: a critical review. International Journal of Mechanical Engineering and Technology, 8(9), 32-44.
  46. Anand.R,Dash.A, Tripath.S, and Mahapatra. T.R (2017), “Operational Competitiveness of Retail Industries: A case study in Odisha”, International Journal of Management & Business Studies, Studies, Vol 7, Issue 1, PP 21-26Vol 7, Issue 1, PP 21-26
  47. Ajitabh RP ., A.Dash, S.Tripathy, and T.R.Mahapatra (2017), “An Empirical Study of the Supply Chain Effectiveness in Service Industries: An AHP Approach”, International Journal of Management & Business Studies, Vol 7, Issue 1, PP 31-37
  48. Dash.B and S.Tripathy, (2017), “Study of Critical Success Factors of Indian Manufacturing Industries: A Case Study”, International Journal of Management & Business Studies, Vol 7, Issue 1, PP 42-49
  49. Kumar.S, I.Sardar.and S.Tripathy, (2017), “Mathematical Model Used to Determine Supply Chain Performance in Manufacturing”, International Journal of Management & Business Studies, Vol 7, Issue 1, PP 54-58
  50. Nayak, S.K., Mishra, P.C. (2017). Analysis of a diesel engine fuelled with jojoba blend and coir pith producer gas. International Journal of Automotive and Mechanical Engineering, 2017, 14(4), pp. 4675–4689, DOI: 10.15282/ijame.14.4.2017.7.0368
  51. Nayak, S.K., Mishra, P.C., Behera, G.R. (2017).  Characterization of coconut shell imitatived producer gas in adiesel engine. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(16), pp. 1718–1724, DOI: 10.1080/15567036.2016.1141266
  52. Nayak, S.K., Mishra, P.C., Behera, G.R., Kumar, A. (2017). Experimental investigation of salmon blends and sesame wood chips as alternative fuel. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(14), pp. 1461–1468, DOI: 10.1080/15567036.2015.1124943
  53. Nayak, S.K., Behera, G.R., Mishra, P.C., Sahu, S.K. (2017). Biodiesel vs diesel: A race for the future. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(14), pp. 1453–1460, DOI: 10.1080/15567036.2015.1062827
  54. Nayak, S.K., Mishra, P.C., Behera, G.R. (2017). Experimental investigation on dual-fuel engine utilizing waste cooking oil and producer gas. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(4), pp. 369–376, DOI: 10.1080/15567036.2015.1122684
  55. Nayak, S.K., Behera, G.R., Mishra, P.C., Kumar, A. (2017). Functional characteristics of jatropha biodiesel as a promising feedstock for engine application. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(3), pp. 299–305, DOI: 10.1080/15567036.2015.1120826
  56. Nayak, S.K., Mishra, P.C., Kumar, A., Behera, G.R., Nayak, B. (2017). Experimental investigation on property analysis of Karanja oil methyl ester for vehicular usage. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(3), pp. 306–312, DOI: 10.1080/15567036.2016.1173131
  57. Nayak, S.K., Behera, G.R., Mishra, P.C. (2017). Physio-chemical characteristics of Punnang oil and rice husk-generated producer gas. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(3), pp. 291–298, DOI: 10.1080/15567036.2015.1065297
  58. Nayak, S.K., Mishra, P.C. (2017). Application of neem biodiesel and dimethyl carbonate as alternative fuels. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(3), pp. 284–290, DOI: 10.1080/15567036.2015.1062828
  59. Nayak, S.K., Behera, G.R., Mishra, P.C. (2017). Exhaust from a dual-fuel engine using quinine nut oil and producer gas. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2017, 39(2), pp. 246–253, DOI: 10.1080/15567036.2015.1107863
  60. Nayak, S.K., Mishra, P.C. (2017).  Emission from a dual fuel operated diesel engine fuelled with Calophyllum Inophyllum biodiesel and producer gas. International Journal of Automotive and Mechanical Engineering, 2017, 14(1), pp. 3954–3969, DOI: 10.15282/ijame.14.1.2017.11.0321
  61. Mishra, S. B., Abhishek, K., Satapathy, M. P., & Mahapatra, S. S. (2017). Parametric appraisal of compressive strength of FDM build parts. Materials Today: Proceedings, 4(9), 9456-9460.
  62. Mishra, S. B., Malik, R., & Mahapatra, S. S. (2017). Effect of external perimeter on flexural strength of FDM build parts. Arabian Journal for Science and Engineering, 42(11), 4587-4595.
  63. Mishra, S. B., Pattnaik, R., & Mahapatra, S. S. (2017). Parametric analysis of wear behaviour on fused deposition modelling build parts. International Journal of Productivity and Quality Management, 21(3), 375-391.
  64. Vijay K. Mishra, Subhash C. Mishra & Dipankar N. Basu (2017) Simultaneous estimation of parameters in analyzing porous medium combustion—assessment of seven optimization tools, Numerical Heat Transfer, Part A: Applications, 71:6, 666-676, DOI: 10.1080/10407782.2016.1139908
  65. Vijay K. Mishra, Subhash C. Mishra & Dipankar N. Basu (2017) Simultaneous estimation of four parameters in a combined-mode heat transfer in a 2D porous matrix with heat generation, Numerical Heat Transfer, Part A: Applications, 71:6, 677-692, DOI: 10.1080/10407782.2016.1139910
  1. Satyananda Tripathy, A. K. Rout and Prof. (Dr.) M. K. Roul, Heat transfer due to Impinging flames on plane surfaces, published in the Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 13, Issue 4, Aug. 2016, pp. 27-34.
  2. Kumar, A., & Panda, S. (2016). Design of a 1-3 viscoelastic composite layer for improved free/constrained layer passive damping treatment of structural vibration. Composites Part B: Engineering, 96, 204-214.
  3. Panda, A., Sahoo, A. K., & Rout, A. K. (2016). Investigations on surface quality characteristics with multi-response parametric optimization and correlations. Alexandria Engineering Journal, 55(2), 1625-1633.
  4. Kumar, A., & Ghosh, S. K. (2016). Oil condition monitoring for HEMM–a case study. Industrial Lubrication and Tribology.
  5. Kumar, A., Kumar, R., & Ghosh, S. K. (2016). Wear Analysis of Mine Equipment. Journal of Mines, Metals & Fules, 64, 5-6.
  6. Deka, T. J., Behera, A., & Joshi, K. K. (2016). Optimization of Process Parameters in Electro-discharge Machining of EN24 Steel using Grey-Taguchi Method. 7(2), 1–6.
  7. Bhuyan, R. K., & Routara, B. C. (2016). Optimization the machining parameters by using VIKOR and Entropy weight method during EDM process of Al–18% SiCp metal matrix composite. Decision Science Letters, 5(2). https://doi.org/10.5267/j.dsl.2015.11.001
  8. Dash, S., Nayak, R. K., & Routara, B. C. (2016). Process parameter optimization in drilling Al2O3-and TiO2-filled GFRP composites to minimize thrust force and delamination. Composites: Mechanics, Computations, Applications, 7(1). https://doi.org/10.1615/CompMechComputApplIntJ.v7.i1.10
  9. Mohanty, S., & Routara, B. C. (2016). A review on machining of metal matrix composites using nanoparticle mixed dielectric in electro-discharge machining. International Journal of Automotive and Mechanical Engineering, 13(2). https://doi.org/10.15282/ijame.13.2.2016.18.0290
  10. Nayak, R. K., Mahato, K. K., Routara, B. C., & Ray, B. C. (2016). Evaluation of mechanical properties of al2o3 and tio2 nano filled enhanced glass fiber reinforced polymer composites. Journal of Applied Polymer Science. https://doi.org/10.1002/app.44274
  11. Nayak, R. K., Rathore, D., Routara, B. C., & Ray, B. C. (2016). Effect of nano Al2O3 fillers and cross head velocity on interlaminar shear strength of glass fiber reinforced polymer composite. International Journal of Plastics Technology, 20(2), 334–344. https://doi.org/10.1007/s12588-016-9158-z
  12. Sharma, Y. A. G. Y. A., Kumar, P. A. R. M. O. D., Rana, B. K., & Das, A. K. (2016, September). Rotary entrainment in stratified gas-liquid layers: An experimental study. In Proc Indian Natn Sci Acad (Vol. 82, No. 4, pp. 1293-1301).
  13. Rana, B. K., Das, A. K., & Das, P. K. (2016). Collapse of a taylor bubble at a free surface. Multiphase Science and Technology, 28(2).
  14. Rana, B. K., Das, A. K., & Das, P. K. (2016). Numerical study of air entrainment and liquid film wrapping around a rotating cylinder. Industrial & Engineering Chemistry Research, 55(46), 11950-11960.
  15. Rana, B. K., Das, A. K., & Das, P. K. (2016). Asymmetric bursting of Taylor bubble in inclined tubes. Physics of Fluids, 28(8), 082106.
  16. Nayak, B. B., & Mahapatra, S. S. (2016). Optimization of WEDM process parameters using deep cryo-treated Inconel 718 as work material. Engineering Science and Technology, an International Journal, 19(1), 161–170. https://doi.org/10.1016/j.jestch.2015.06.009
  17. Vinod, S. Divakara, D. Sahu, Performance and emission characteristics of a CI engine run on waste cooking oil-diesel blends, Pollution Research, 2016, 35, 163
  18. Das D*, Mishra PC, Chaubey AK and Singh S, Fabrication process optimization for improved mechanical properties of Al 7075/SiCp metal matrix composites. Management Science Letters 6 (2016) 297–308. First online published on 30-01-2016. Growing Science, DOI:10.5267/j.msl.2016.1.011
  19. Deka, T. J., Behera, A., & Joshi, K. K. (2016). Optimization of Process Parameters in Electro-discharge Machining of EN24 Steel using Grey-Taguchi Method. 7(2), 1–6.
  20.  “An alternate approach to synthesize TiC powder through thermal plasma processing of titania rich slag’ Ceramics International. 42  16  (2016)  18004-18011  S. Kasimuthumaniyan, S.K. Singh, K. Jayasankar,  K. Mohanta, A. Mandal.
  21. Pradhan, Premananda, Mishra, P. C., Sahu, K. B.. (2016). Thermal Performance and Emission Characteristics of Newly Developed Porous Radiant Burner for Cooking Applications, Journal of Porous Media, 19 (5), 441-452.
  22. Bej, N., & Sinhamahapatra, K. P. (2016). Numerical analysis on the heat and work transfer due to shear in a hot cascade Ranque–Hilsch vortex tube. International Journal of Refrigeration, 68, 161–176. https://doi.org/10.1016/J.IJREFRIG.2016.04.021
  23. Ghose, P., Patra, J., Datta, A., & Mukhopadhyay, A. (2016). Prediction of soot and thermal radiation in a model gas turbine combustor burning kerosene fuel spray at different swirl levels. Combustion Theory and Modelling, 20(3), 457-485.
  24. Ghose, P., Datta, A., & Mukhopadhyay, A. (2016). Modeling Nonequilibrium Combustion Chemistry Using Constrained Equilibrium Flamelet Model for Kerosene Spray Flame. Journal of Thermal Science and Engineering Applications, 8(1).
  25. Ghose, P., Datta, A., & Mukhopadhyay, A. (2016). Effect of prediffuser angle on the static pressure recovery in flow through casing-liner annulus of a gas turbine combustor at various swirl levels. Journal of Thermal Science and Engineering Applications, 8(1).
  26. Prakash, G., Ramiz, A. S., Abhilash, N., Ujjwal, T., & Rahul, B. (2016). Modeling of Effervescent Spray with Secondary Atomization within a Furnace. Indian Journal of Science and Technology, 9, 34.
  27. Jha, P., Gautam, R. K., Tyagi, R., & Kumar, D. (2016). Sliding Wear Behavior of TiC-Reinforced Cu-4 wt.% Ni Matrix Composites. Journal of Materials Engineering and Performance, 25(10), 4210–4218. https://doi.org/10.1007/s11665-016-2303-1
  28. Behera, R. R., Ghadai, R. K., Kalita, K., & Banerjee, S. (2016). Simultaneous prediction of delamination and surface roughness in drilling GFRP composite using ANN. International Journal of Plastics Technology, 20(2), 424-450.
  29. Behera, R. R., Sankar, M. R., Swaminathan, J., Kumar, I., Sharma, A. K., & Khare, A. (2016). Experimental investigation of underwater laser beam micromachining (UW-LB?M) on 304 stainless steel. The International Journal of Advanced Manufacturing Technology, 85(9), 1969-1982.
  30. Nayak, S. K., Mishra, P. C., & Parashar, S. K. S. (2016). Influence of spray characteristics on heat flux in dual phase spray impingement cooling of hot surface. Alexandria Engineering Journal, 55(3), 1995-2004.
  31. Nayak, S. K., & Mishra, P. C. (2016). Thermal characteristics of air-water spray impingement cooling of hot metallic surface under controlled parametric conditions. Journal of Thermal Science, 25(3), 266-272.
  32. Nayak, S. K., Mishra, P. C., & Parashar, S. K. S. (2016). Enhancement of heat transfer by water–Al2O3 and water–TiO2 nanofluids jet impingement in cooling hot steel surface. Journal of Experimental Nanoscience, 11(16), 1253-1273.
  33. Nayak, S. K., Mishra, P. C., & Parashar, S. K. S. (2016). Experimental investigation and optimization of air-water spray impingement cooling to enhance heat transfer. International Journal of Engineering and Technology, 8(1), 379-390.
  34. Nayak, S., & Mishra, P. (2016). Desirability function based optimization of experimental data for air-water spray impingement cooling. Management Science Letters, 6(3), 203-212.
  35. Kar, S.P., Rath, P.(2016) A Conduction–Radiation Mixture Model for Laser-Assisted Phase Change of Semitransparent Material Heat Transfer Engineering, 37 (16), pp. 1427-1438.
  36. Guha, S., Das, S., Utkarsh, A., (2016) An experimental investigation on burr height and machining time in drilling for metallic and non-metallic specimens, Reason- A Technical Journal, 15, 23-28.
  37.  Guha, S., Rahman, S. I. M., Kumar, R., Paul, S., Choudhury, S., (2016) An experimental investigation on surface grinding performance. Manufacturing Technology Today, 15, 21-27.
  38.  Guha, S., Talapatra, D.,  Das, D. J., (2016) Development of a rain water sensing window. Journal of the Association of Engineers, 86, 73-77.
  39. Tripathy, S., Aich, S., Chakraborty, A., & Lee, G. M. (2016). Information technology is an enabling factor affecting supply chain performance in Indian SMEs: a structural equation modelling approach. Journal of Modelling in Management.
  40. Muduli, K., Barve, A., Tripathy, S., & Biswal, J. N. (2016). Green practices adopted by the mining supply chains in India: a case study. International Journal of Environment and Sustainable Development, 15(2), 159-182.
  41. Sanghavi, A., Khan, U., Sen, S., Sikder, E., & Tripathy, S. DIFFERENT GENERATIONS OF MANUFACTURING PROCESSES: A CRITICAL REVIEW.
  42. Lenka.S, P.Peus and S.Tripathy (2016), “Tackling of E-waste for Effective Swachh Bharat” The Research Journal,  Vol 2. Issue 6, PP 01-07
  43.  Mohapatra.A and S.Tripathy, (2016), “A Critical Review of Alternative Sources of Energy towards Sustainability” The Research Journal, Vol 2. Issue 6, PP 08-14
  44.  Pothal L.K, S.Tripathy, A.kumar (2016),“Significance of Supplier Relationship Management towards Product Quality Development in Automobile Industries” The Research Journal, Vol 2. Issue 6, PP 15-22
  45. Patnaik.A and S.Tripathy(2016),“ Green Fashion- Its Flourishing Effect on Consumer and Corporate Culture” The Research Journal, Vol 2. Issue 6, PP 40-45
  46. Majumdar.S, R.Singh and S.Tripathy(2016),“ TQM is a key element of any manufacturing industry: A case at TATA MOTORS” The Research Journal, Vol 2. Issue 6, PP 46-52
  47. Ghosh.S,S.Majumdar and S.Tripathy(2016),“ Effect of Kaizen & 5s In Total Quality Management Practices of Manufacturing Industry: A Case Study” The Research Journal, Vol 2. Issue 6, PP 63-74
  48. Nayak, S.K., Mishra, P.C. (2016). Investigation on jojoba biodiesel and producer gas in dual-fuel mode. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2016, 38(15), pp. 2265–2271, DOI: 10.1080/15567036.2015.1027834
  49. Nayak, S.K., Mishra, P.C. (2016). Emission characteristics of diesel fuel composed of linseed oil (Linum Usitatissium) blends utilizing rice husk producer gas. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2016, 38(14), pp. 2001–2008, DOI: 10.1080/15567036.2014.999176
  50. Nayak, S.K., Mishra, P.C. (2016). Emission from utilization of producer gas and mixes of jatropha biodiesel. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2016, 38(14), pp. 1993–2000. DOI: 10.1080/15567036.2014.987857
  51. Nayak, S.K., Mishra, P.C. (2016). Emissions from sawdust biomass and diesel blends fuels. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2016, 38(14), pp. 2050–2057, DOI: 10.1080/15567036.2014.999177
  52. Nayak, S.K., Mishra, P.C. (2016). Emission characteristics of jatropha oil blends using waste wood producer gas. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2016, 38(14), pp. 2153–2160, DOI: 10.1080/15567036.2014.989340
  53. Nayak, S.K., Mishra, P.C. (2016). Application of Nagchampa biodiesel and rice husk gas as fuel. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2016, 38(14), pp. 2024–2030, DOI: 10.1080/15567036.2015.1017672
  54. Buddala, R., Mahapatra, S. S., Pandey, A. K., & Mishra, S. B. (2016). An Effective Jaya Optimization for Flexible Job Shop Scheduling [C]. In International Conference on Emerging Trends in Mechanical Engineering.
  55. Mishra, V.K., Mishra, S.C. and Basu, D.N. (2016), Simultaneous Estimation of Properties in a Combined Mode Conduction–Radiation Heat Transfer in a Porous Medium. Heat Trans. Asian Res., 45: 699-713. https://doi.org/10.1002/htj.21184
  1. Bhuyan, R. K., Routara, B. C., & Parida, A. K. (2015a). An approach for optimization the process parameter by using TOPSIS Method of Al-24%SiC metal matrix composite during EDM. In Materials Today: Proceedings (Vol. 2). https://doi.org/10.1016/j.matpr.2015.07.272
  2. Bhuyan, R. K., Routara, B. C., & Parida, A. K. (2015b). Notice of Removal: Parametric optimization during EDM of Al-SiCp metal matrix composite using Fuzzy logic. In International Conference on Electrical, Electronics, Signals, Communication and Optimization, EESCO 2015. https://doi.org/10.1109/EESCO.2015.7253834
  3. Bhuyan, R. K., Routara, B. C., & Parida, A. K. (2015c). Using entropy weight, OEC and fuzzy logic for optimizing the parameters during EDM of Al-24 % SiCPMMC. Advances in Production Engineering and Management, 10(4), 217–227. https://doi.org/10.14743/apem2015.4.204
  4. Mishra, P. C., Das, D. K., Ukamanal, M., Routara, B. C., & Sahoo, A. K. (2015). Multi-response optimization of process parameters using Taguchi method and grey relational analysis during turning AA 7075/SIC composite in dry and spray cooling environments. International Journal of Industrial Engineering Computations, 6(4). https://doi.org/10.5267/j.ijiec.2015.6.002
  5. Parida, A. K., Bhuyan, R. K., & Routara, B. C. (2015). Notice of Removal: A Taguchi with principal component analysis based approach for the assessment of the cutting parameters during drilling of GFRP composite. In International Conference on Electrical, Electronics, Signals, Communication and Optimization, EESCO 2015. https://doi.org/10.1109/EESCO.2015.7253723
  6. Rana, B. K., Das, A. K., & Das, P. K. (2015). Mechanism of bursting Taylor bubbles at free surfaces. Langmuir, 31(36), 9870-9881.
  7. K.M. Sreekanth, S. Debjyoti, Effect of iron oxide nanoparticle in bio digestion of a portable food-waste digester, Journal of Chemical and Pharmaceutical Research, 2015, 7 (9), 353-359
  8. Divakara, S. Debjyoti, K. Ravi, B. Sudesh, Performance and Emission Characteristics of Pongamia Oil-Kerosene Blend Used in Commercial Kerosene Stove, Energy and Power, 5 (1A), 19-27
  9. Das D, Mishra PC*, Singh S and Thakur RK, Tool wear in turning ceramic reinforced aluminum matrix composites-A review. Journal of Composite Materials 49:24 (2015) 2949–2961. Sage Publications, DOI:10.1177/0021998314558955
  10. Sahoo AK*, Rout AK and Das D, Response surface and artificial neural network prediction model and optimization for surface roughness in machining AISI 1040 steel. International Journal of Industrial Engineering Computations 6 (2015) 229-240. Growing Science, DOI:10.5267/j.ijiec.2014.11.001
  11. Das D, Mishra PC*, Sahoo AK and Ghosh D, Experimental investigation on cutting tool performance during turning AA 6063 using uncoated and multilayer coated carbide inserts. International Journal of Machining and Machinability of Materials 17:3/4 (2015) 277-294. Inderscience, DOI:10.1504/IJMMM.2015.071996
  12. Mishra PC*, Das D, Ukamanal M, Routara BC and Sahoo AK, Multi-response optimization of process parameters using Taguchi method and gray relational analysis during turning AA 7075/SiC composite in dry and spray cooling environments. International Journal of Industrial Engineering Computations 6 (2015) 445-456. Growing Science, DOI: 10.5267/j.ijiec.2015.6.002
  13. Patel, J. K., & Natarajan, G. (2015). A generic framework for design of interface capturing schemes for multi-fluid flows. Computers & Fluids, 106, 108-118.
  14.  Low cost porous alumina with tailored gas permeability and mechanical properties prepared using rice husk and sucrose for filter applications”, Microporous and Mesoporous Materials. 213 1 September (2015) 48-58 Ajay Kumar, K. Mohanta, D. Kumar and Om Parkash.
  15. Sahu, K. B., Ghose, P., Mohapatra, Natabara, Puthal, Manas Kumar. (2015). Numerical Investigation on Structure of a Partially Premixed Methane Flame at Various Equivalence Ratios, International Journal of Advance Research in Science and Engineering, 4(1), 50-61.
  16. Sahu, K. B., Rout, A. (2015). Effect of Nanoparticle Size on Natural Convection within Differentially Heated Square Enclosure Filled with Al2O3/Water Nanofluid, Journal of Material Science and Mechanical Engineering, 2 (13), 10-15.
  17. Bej, N., & Sinhamahapatra, K. P. (2015). CFD study on the effects of viscous shear in a hot cascade Ranque–Hilsch vortex tube. Materials Science and Engineering, 101(1), 012066. https://doi.org/10.1088/1757-899X/101/1/012066
  18. Patra, J., Ghose, P., Datta, A., Das, M., Ganguly, R., Sen, S., & Chatterjee, S. (2015). Studies of combustion characteristics of kerosene ethanol blends in an axi-symmetric combustor. Fuel, 144, 205-213.
  19. Kumar, U., Yadav, I., Kumari, S., Kumari, K., Ranjan, N., Kesharwani, R. K., … & Pal, S. K. (2015). Defect identification in friction stir welding using discrete wavelet analysis. Advances in Engineering Software, 85, 43-50.
  20. Kesharwani, R. K., Panda, S. K., & Pal, S. K. (2015). Experimental investigations on formability of aluminum tailor friction stir welded blanks in deep drawing process. Journal of Materials Engineering and Performance, 24(2), 1038-1049.
  21. Kamlesh, S. S., Mishra, R., Kumari, N., & Gupta, J. K. (2015). FEA and thermal analysis of cylinder liner of marine engine using titanium alloy. Journal of Material Science and Mechanical Engineering, 2(8), 9-14.
  22. Mohapatra, S. K., & Maity, K. (2015). Modelling of extrusion of square section of aa-6xxx through cosine and linear converging die. Journal for Technology of Plasticity, 40(2).
  23. Pati, J.R., Hotta, S.K. and Mahanta, P., 2015. Effect of waste heat recovery on drying characteristics of sliced ginger in a natural convection dryer. Procedia Engineering, 105, pp.145-152.
  24. Nayak, S. K., Nayak, S. K., Mishra, P. C., & Tripathy, S. (2015). Influence of compression ratio on combustion characteristics of a VCR engine using Calophyllum inophyllum biodiesel and diesel blends. Journal of Mechanical Science and Technology, 29(9), 4047-4052
  25. Mishra, P. C., Nayak, S. K., Pradhan, P., & Ghosh, D. P. (2015). Impingement cooling of hot metal strips in runout table− a review. Interfacial Phenomena and Heat Transfer, 3(2).
  26.  Guha, S.,  Banerjee, T.,  Bandyopadhyay, A., Das, S., (2015)  An experimental investigation on slab milling of cast iron specimens. Indian Science Cruiser, 29,  22-40.
  27. Panigrahi, J., Das, B., & Tripathy, S. (2015). Paving the path from Education to employment. Parikalpana: KIIT Journal of Management, 11(1), 113.
  28. Acharya SK, Laha A, Acharya PK, Tripathy S ( 2015); Applications of Six-Sigma in Pharmaceutical Industries.International Journal of Research in Mechanical Engineering and Technology; 5(1), 22-28.
  29. Bhuyan, D. P., & Tripathy, S. (2015). Competitive strategy and its impact on ITC portfolio. International Journal of Research in Mechanical Engineering & Technology, 5(1), 51-59.
  30. Vijay K. Mishra, Subhash C. Mishra & Dipankar N. Basu (2015) Combined Mode Conduction and Radiation Heat Transfer in a Porous Medium and Estimation of the Optical Properties of the Porous Matrix, Numerical Heat Transfer, Part A: Applications, 67:10, 1119-1135, DOI: 10.1080/10407782.2014.955358
  1. Harichandan, A.B., & Shamim, T. (2014). CFD analysis of bubble hydrodynamics in a fuel reactor for a hydrogen-fueled chemical looping combustion system. Journal of Energy Conversion and Management. Vol. 86, pp. 1010-1022.
  2. Harichandan, A.B., & Shamim, T. (2014). Effect of fuel and oxygen carriers on the hydrodynamics of fuel reactor in a chemical looping combustion system. ASME Journal of Thermal Science and Engineering Applications. Vol. 6 (4), 041013: 1- 8.
  3. Parida, A. K., Bhuyan, R. K., & Routara, B. C. (2014). Multiple characteristics optimization in machining of GFRP composites using Grey relational analysis. International Journal of Industrial Engineering Computations, 5(4). https://doi.org/10.5267/j.ijiec.2014.8.001
  4. Routara, B. C., Bhuyan, R. K., & Parida, A. K. (2014). Application of the entropy weight and TOPSIS method on Al-12% SiC metal matrix composite during EDM. International Journal of Manufacturing, Materials, and Mechanical Engineering, 4(4). https://doi.org/10.4018/ijmmme.2014100104
  5. Senapati, A. K., Mishra, P. C., & Routara, B. C. (2014). Use of waste flyash in fabrication of aluminium alloy matrix composite. International Journal of Engineering and Technology, 6(2).
  6. Das D, Mishra PC*, Singh S and Pattanaik S, Fabrication and heat treatment of ceramic reinforced aluminium matrix composites-a review. International Journal of Mechanical and Materials Engineering 1:6 (2014)1-15. Springer DOI:10.1186/s40712-014-0006-7
  7. Das D, Mishra PC*, Singh S and Thakur RK, Properties of ceramic reinforced aluminium matrix composites- a review. International Journal of Mechanical and Materials Engineering 1:12 (2014)1-16. Springer, DOI:10.1186/s40712-014-0012-9
  8. Mishra PC*, Das D and Sahoo SK, Comparative performance in hard turning of AISI 1015 steel with carbide insert using orthogonal array design and grey relational analysis under spray impingement cooling and dry environment: A case study. International Journal of Manufacturing, Materials and Mechanical Engineering 4:3 (2014) 1-32. IGI Global, DOI:10.4018/ijmmme.2014070101
  9.  Rahul., Arya, H. K., & Saxena, R. (2014). Experimental determination of cooling rate and its effect on microhardness in submerged arc welding of mild steel plate (grade c-25 as per IS 1570). J Mater Sci Eng, 3(2), 1-4.
  10. Rahul, A., Arya, H. K., & Saxena, R. K. (2014). Effect of cooling rate on microstructure of SAW welded mild steel plate (Grade C 25 as Per IS 1570). International Journal of Modern Engineering Research, 4(1), 222-228.
  11.  “Low cost porous alumina with tailored micro-structure and thermal conductivity prepared using rice husk and sucrose”, Journal of the American Ceramic Society.97 [6] 1708-1719 (2014) K. Mohanta Ajay Kumar, Om Parkash and D. Kumar.
  12.  “Processing and properties of low cost macro-porous alumina ceramics with tailored porosity and pore size fabricated using rice-husk and sucrose”, Journal of the European Ceramic Society 34 (2014) 2401-2412. K. Mohanta , Ajay Kumar, Om Parkash and D. Kumar.
  13. “Green properties of dry pressed alumina compacts fabricated using sucrose as binder”, Ceramic International, Elsevier Science. 4 (2014) 6271-6277. Ajay Kumar, K. Mohanta, D. Kumar and Om Parkash
  14. Sahu, K. B., Singh, R. K. (2014) Analysis of Heat Transfer and flow due to Natural Convection in Air around Heated Triangular Cylinders of Different sizes inside a Square Enclosure, Procedia Engineering, 90, 550-556.
  15. Bej, N., & Sinhamahapatra, K. P. (2014). Exergy analysis of a hot cascade type Ranque-Hilsch vortex tube using turbulence model. International Journal of Refrigeration, 45, 13–24. https://doi.org/10.1016/J.IJREFRIG.2014.05.020
  16. Bej, N., & Sinhamahapatra, K. P. (2014). CFD Study on the Effects of Nozzle Number on Turbulent Flow and Energy Separation in a Ranque-Hilsch Vortex Tube. Applied Mechanics and Materials, 465–466, 505–509. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/AMM.465-466.505
  17. Ghose, P., Patra, J., Datta, A., & Mukhopadhyay, A. (2014). Effect of air flow distribution on soot formation and radiative heat transfer in a model liquid fuel spray combustor firing kerosene. International Journal of Heat and Mass Transfer, 74, 143-155.
  19. Jha, P., Gupta, P., Kumar, D., & Parkash, O. (2014). Synthesis and characterization of Fe-ZrO2 metal matrix composites. Journal of Composite Materials, 48(17), 2107–2115. https://doi.org/10.1177/0021998313494915
  20. Kesharwani, R. K., Panda, S. K., & Pal, S. K. (2014). Multi objective optimization of friction stir welding parameters for joining of two dissimilar thin aluminum sheets. Procedia Materials Science, 6, 178-187.
  21. Mishra, P. C., Mukherjee, S., Nayak, S. K., & Panda, A. (2014). A brief review on viscosity of nanofluids. International nano letters, 4(4), 109-120.
  22. Sahu S., Parhi D.R., Automatic Design of Fuzzy Rules Using GA for Fault Detection in Cracked Structures, Applied Mechanics and Materials, 592 – 594, 2014, pp.2016-2020.
  23. Sahu S., Behera R.K., Parhi D.R., A New Reactive Hybrid Membership Function in Fuzzy Approach for Identification of Inclined Edge Crack in Cantilever Beam Using Vibration Signatures, Applied Mechanics and Materials, 592 – 594, 2014, pp. 1996-2000.
  24. Sahu S., Parhi D.R., Performance comparison of Genetic algorithm and Differential evolution algorithm in the field of damage detection in cracked structures, Journal of Vibration Engineering & Technologies, 2017, 5(2).
  25. Sahu, S., & Parhi, D. R. (2014, May). Automatic design of fuzzy MF using Genetic Algorithm for fault detection in structural elements. In 2014 Students Conference on Engineering and Systems (pp. 1-5). IEEE.
  26. Kar, S.P., Rath, P. (2014) A fixed-grid based mixture model for pulsed laser phase change process Computational Thermal Sciences, 6 (1), pp. 13-26.
  27. Chakrabarty, S., Mishra, S.K., & Pant, P. (2014). Crystallographic orientation and boundary effects on misorientation development in austenitic stainless steel. Materials Science and Engineering: A, 617,  228-234.
  28. Nayak, S., Bisoi, A., Dash, P. R., & Pradhan, P. K. (2014). Static stability of a viscoelastically supported asymmetric sandwich beam with thermal gradient. International Journal of Advanced Structural Engineering (IJASE), 6(3), 1-7.
  29. Aich, S., & Tripathy, S. (2014). An interpretive structural model of green supply chain management in Indian computer and its peripheral industries. International Journal of Procurement Management, 7(3), 239-256.
  30. Mishra, S. B., & Mahapatra, S. S. (2014). Improvement in tensile strength of FDM built parts by parametric control. In Applied Mechanics and Materials (Vol. 592, pp. 1075-1079). Trans Tech Publications Ltd.
  1. Behera, A., Behera, A., & Mishra, S. C. (2013). Martensitic Transformation Characteristic of Ni-Mn Based Ferromagnetic Shape Memory Alloys. International Journal of Advances in Applied Sciences, 2(4), 205–208. https://doi.org/10.11591/ijaas.v2i4.2349
  2. Behera, A., Chaine, S. C., & Behera, A. (2013). Tribological study of Al 2 O 3 / TiO 2 / Cu composite by using pin-on-disc wear machine. 61, 16672–16674.
  3. Behera, A., Mishra, S. C., Behera, A., & Dhal, J. P. (2013). Porosity Analysis of Plasma Sprayed Coating by Application of Soft Computing. Journal of Materials, 2013, 1–6. https://doi.org/10.1155/2013/150671
  4. Routara, B. C., Sahoo, A. K., Rout, A. K., Parida, K. A., & Behera, J. R. (2013). Analysis of machining characteristics in drilling of GFRP composite with application of fuzzy logic approach. International Journal of Industrial Engineering Computations, 4(4). https://doi.org/10.5267/j.ijiec.2013.08.001
  5.  Sahu, D.; Mishra, P.; Edubilli, S.; Verma, A.; Gumma, S.; Hydrogen Adsorption on Zn-BDC, Cr-BDC, Ni-DABCO and Mg-DOBDC Metal Organic Frameworks. J. Chem. Engg. Data, 2013, 58(11) 3096-3101
  6. Sahu, D.; Mishra, P.; Das, N.; Verma, A.; Gumma, S.; The Net Adsorption of Hydrogen on Palladium Nanoparticles. Surface Rev. Lett. DOI: 10.1142/S0218625X1450022X
  7. Singh, R. K., Sahu, K. B., Mishra, T. D. (2013). Analysis of Heat Transfer and Fluid Flow due to Natural Convection in Air around Heated Square Cylinders of Different Sizes inside an Enclosure, International Journal of Engineering Research and Applications, 3(3), 766-771.
  8. Ghose, P., Datta, A., & Mukhopadhyay, A. (2013). Effect of dome shape on static pressure recovery in a dump diffuser at different inlet swirl. International Journal of Emerging Technology and Advanced Engineering, 3(3), 465-471.
  9. Behera, R. R., Anisha, E., Sankar, M. R., & Dixit, U. S. (2013). Experimental Investigations of CO2  Laser Micro Channel Engraving on Hardened AISI 1040 Alloy Steel. Journal of Manufacturing Technology Research, 5(3/4), 179.
  10. Mishra, R., Naskar, T. K., & Acharya, S. (2013). SYNTHESIS OF FLEXIBLE 4-BAR LINKAGE CONSIDERING DEFORMATION. International Journal of Engineering Science and Technology, 5(7), 1345.
  11. Mishra, R., Naskar, T. K., & Acharya, S. (2013). Synthesis of coupler curve of a four bar linkage with joint clearances. Synthesis, 3(1), 1193-1199.
  12. Mishra, P. C., Nayak, S. K., Chaini, R., Ghosh, D. P., & Samantaray, B. B. (2013). Effect of controlling parameters on heat transfer during spray impingement cooling of steel plate. Am. J. Eng. Res.(AJER), 2(9), 8-16.
  13. Mishra, P. C., Nayak, S. K., & Mukherjee, S. (2013). Thermal conductivity of nanofluids-an extensive literature review. Int. J. Eng. Res. Technol, 2(9), 734-745.
  14. Mishra, P. C., Nayak, S. K., Nayak, S. K., Pradhan, P., & Ghosh, D. P. (2013). Model based numerical state feedback control of jet impingement cooling of a steel plate by pole placement technique. Int. J. of Comp. Eng. Res, 3(8), 37-44.
  15. Mishra, P. C., Nayaka, S. K., & Panda, S. R. (2013). Numerical Analysis of Convection Driven Melting of Metals and Alloys Using Fixed Grid Methods. Int. J. of Thermal technol, INPRESSCO, 3(3), 107-112.
  16. Kar, S.P., Rath, P. (2013) A phase density based enthalpy model for laser assisted phase change process International Communications in Heat and Mass Transfer, 40 (1), pp. 12-18.
  17. K. Nayak, P.C. Mishra & S. R. Panda,(2013). Numerical Analysis of Convection Driven Melting of Metals and Alloys Using Fixed Grid Methods International Journal of Thermal Technologies, 3, 107-112
  18. Roy, S. Topping, V. Sarin, “Growth and Characterization of Lu2O3:Eu3+ Thin on Single Crystal Yttria-Doped Zirconia”, JOM, vol. 65(4), pp. 557-561, 2013.
  19. Xu, J., Erickson, D., Roy, S., Sarin, V. Protective CVD mullite coatings on single-crystal silicon substrates JOM, 2013, 65(4), pp. 567–573
  20. Roy, S., Lingertat, H., Brecher, C., Sarin, V. Optical properties of anisotropic polycrystalline Ce3+ activated LSO Optical Materials, 2013, 35(5), pp. 827–832
  21. Tripathy, S., Sahu, S., & Ray, P. K. (2013). Interpretive structural modelling for critical success factors of R&D performance in Indian manufacturing firms. Journal of Modelling in Management.
  22. Rath, D., & Tripathy, S. (2013). Investigation of extrusion of lead experimentally from round section through equilateral triangular section converging dies at different area reductions during forward metal extrusion process. International Journal of Engineering and Science, 3(1), 32-38.
  23. Tripathy, S. (2013). Market focus and management strategy are the critical factors of R&D in Indian manufacturing firms. International Journal of Intercultural Information Management, 3(4), 292-304.
  24. Rath D, Tripathy S(2013) Investigation of extrusion of lead experimentally from round section through equilateral triangular section converging dies at different area reductions during forward metal extrusion process. International Journal of Engineering and Science 3 (1):32–38
  25. Tripathy, S., & Patra, S. K. (2013). Geisler’s Integrated Cost-Performance Model: A Footstep for Performance Measurement of R&D Towards Ethiopian Pharmaceutical Industries.
  1. Harichandan, A.B. & Roy, A. (2012). CFR: A finite volume approach for computing incompressible viscous flow. Journal of Applied Fluid Mechanics. Vol. 5, No. 3, pp. 39-52.
  2. Harichandan, A.B., & Roy, A. (2012), Numerical investigation of flow past single and tandem cylindrical bodies in the vicinity of a plane wall. Journal of Fluids and Structures. Vol. 33, pp. 19-43.
  3. Harichandan, A. B., Supradeepan, K., Pradhan, P. K., & Roy, A. (2012). Numerical prediction of incompressible unsteady flow past array of two dimensional circular cylinders placed in staggered arrangements. British Journal of Engineering and Technology. Vol. 1, No. 1, pp. 206-225.
  4. Pradhan, P. K., Dash, P. R., Mishra, C., Roy, S. K., & Harichandan, A. B. (2012). An experimental study on changes of mechanical properties of medium carbon steel due to hardening. i-manager’s Journal on Mechanical Engineering. Vol. 2, No. 3, pp. 33-38.
  5. Thatoi, D. N., Acharya, A. K., & Routara, B. C. (2012). Application of response surface method and fuzzy logic approach to optimize the process parameters for surface roughness in CNC turning. In IEEE-International Conference on Advances in Engineering, Science and Management, ICAESM-2012.
  6. Routara, B. C., Sahoo, A. K., Parida, A. K., & Padhi, P. C. (2012). Response surface methodology and genetic algorithm used to optimize the cutting condition for surface roughness parameters in CNC turning. In Procedia Engineering (Vol. 38). https://doi.org/10.1016/j.proeng.2012.06.232
  7. Gauraha, S., Mahapatra, S. S., & Nayak, B. B. (2012). EFFECT OF PROCESS PARAMETERS ON DELAMINATION IN DRILLING OF GFRP. Journal of Mechatronics and Intelligent Manufacturing, 3(1/2), 67.
  8. Nayak, B. B., & Mahapatra, S. S. (2012). AN INTELLIGENT APPROACH FOR PREDICTION OF ANGULAR ERROR IN TAPER CUTTING USING WIRE-EDM. Journal of Mechatronics and Intelligent Manufacturing, 3(1/2), 17.
  9. “Properties and Industrial Applications of Rice husk: A review’, International Journal of Emerging Technology and Advanced Engineering, 2[10] 86-90 (2012). Ajay Kumar, Kalyani Mohanta , Devendra Kumar  and Om Parkash.
  10. Naskar, T. K., & Mishra, R. (2012). Introduction of control points in B-splines for synthesis of ping finite optimized cam motion program. Journal of mechanical science and technology, 26(2), 489-494.
  11. Parhi D.R., Sahu S., Review of Genetic-Fuzzy Methods used for handling the Uncertainities in Fault Detection, IJAAIES,4(2), 2012, pp. 75-81.
  12. Roy, H. Lingertat, C. Brecher, V. K. Sarin, “Spectroscopic and Transmittance Properties of Ultra-Fine Grained Ce-doped Lutetium Oxyorthosilicate”, IEEE Trans. Nucl. Sci., vol. 59(5), pp. 2587, October 2012.
  13. Roy, S., Ando, T. Solidification behavior of highly supercooled polycrystalline silicon droplets Materials Science in Semiconductor Processing, 2012, 15(6), pp. 722–730
  14. Tripathy, S., Kumar Ray, P., & Sahu, S. (2012). Factors governing R&D practices in Indian manufacturing firms: Structural equation modelling. International Journal of Modelling in Operations Management, 2(1), 45-68.
  1. Routara, B. C., Nanda, B. K., Sahoo, A. K., Thatoi, D. N., & Nayak, B. B. (2011). Optimisation of multiple performance characteristics in abrasive jet machining using grey relational analysis. International Journal of Manufacturing Technology and Management, 24(1–4). https://doi.org/10.1504/IJMTM.2011.046757
  2. Routara, B. C., Nanda, B. K., Sahoo, A. K., Thatoi, D. N., & Nayak, B. B. (2011). Optimisation of multiple performance characteristics in abrasive jet machining using grey relational analysis. International Journal of Manufacturing Technology and Management, 24(1–4), 4–22. https://doi.org/10.1504/IJMTM.2011.046757
  3. “Mechanical Behaviour of Alumina-Zirconia Composite by Slurry Method”, International Journal of Engineering Science and Technology.,  3 (2011) 2  1359-1367. Jyoti Prakash, Devendra Kumar, Kalyani Mohanta
  4. Tripathy, S., Ray, P. K., & Sahu, S. (2011). Performance measurement of R&D is a vaccine for innovation capability: evidence from Indian manufacturing organisations. International Journal of Electronic Transport, 1(1), 76-95.
  5. Tripathy, S., Padhi, V., & Mohanty, S. (2011). Portrayal of vitality of technology enablers in the Indian R&D scenario. International Journal of Value Chain Management, 5(2), 119-140.
  1. Harichandan, A. B., & Roy, A. (2010). Numerical investigation of low Reynolds number flow past two and three circular cylinders using unstructured grid CFR scheme. International Journal of Heat and Fluid Flow. Vol. 31, pp. 154-171.
  2. Datta, S., Routara, B. C., Bandyopadhyay, A., & Mahapatra, S. S. (2010). Principal component analysis in grey based taguchi method for optimization of multiple surface quality characteristics of 6061-T4 aluminum in CNC end milling. In AIP Conference Proceedings (Vol. 1315). https://doi.org/10.1063/1.3552325
  3. Routara, B. C., Mohanty, S. D., Datta, S., Bandyopadhyay, A., & Mahapatra, S. S. (2010a). Combined quality loss (CQL) concept in WPCA-based Taguchi philosophy for optimization of multiple surface quality characteristics of UNS C34000 brass in cylindrical grinding. International Journal of Advanced Manufacturing Technology, 51(1–4). https://doi.org/10.1007/s00170-010-2599-1
  4. Routara, B. C., Mohanty, S. D., Datta, S., Bandyopadhyay, A., & Mahapatra, S. S. (2010b). Optimization in CNC end milling of UNS C34000 medimum leaded brass with multiple surface roughnesses characteristics. Sadhana – Academy Proceedings in Engineering Sciences, 35(5). https://doi.org/10.1007/s12046-010-0041-x
  5. An optimized composition for making dense fused silica bodies from highly loaded slurries using egg white and sucrose”, Journal of the American Ceramic Society, 93[8] 2215-2221(2010) K. Mohanta and P. Bhargava.
  6. Parhi D.R., Sahu S., Review of methodologies used for fault detection using smart techniques, International Journal of Applied Artificial Intelligence in Engineering System, 2(2), 2010, pp.161-166
  7. Parhi D.R., Sahu S., Review of methodologies used for fault detection using smart techniques, International Journal of Applied Artificial Intelligence in Engineering System, 2(2), 2010, pp.161-166.
  8. Roy, T. Ando, “Nucleation Kinetics and Microstructure Evolution of Traveling ASTM F75 Droplets”, Advanced Engineering Materials, vol. 12(9), October 2010.
  1. Routara, B. C., Bandyopadhyay, A., & Sahoo, P. (2009). Roughness modeling and optimization in CNC end milling using response surface method: Effect of workpiece material variation. International Journal of Advanced Manufacturing Technology, 40(11–12). https://doi.org/10.1007/s00170-008-1440-6
  2. Sahoo, P., Barman, T. K., & Routara, B. C. (2009a). Fractal characterisation of surface profile and optimisation in EDM using Taguchi method. International Journal of Surface Science and Engineering, 3(4). https://doi.org/10.1504/IJSURFSE.2009.027419
  3. Sahoo, P., Barman, T. K., & Routara, B. C. (2009b). Taguchi based fractal dimension modeling of surface profile and optimization in cylindrical grinding. Journal of Manufacturing Technology Research, 1(3–4).
  4. Sahoo, P., Routara, B. C., & Bandyopadhyay, A. (2009). Roughness modelling and optimisation in EDM using response surface method for different work piece materials. International Journal of Machining and Machinability of Materials, 5(2–3). https://doi.org/10.1504/IJMMM.2009.023398
  5. Sahu, K.B., Kundu, A., Ganguly, R., Datta, A. (2009 ). Effects of Fuel Type and Equivalence Ratios on the Flickering of Triple Flames, Combustion and Flame, 156, 484-493.
  6. Sahu, K. B., Datta, A., Sen, S., Sarkar, A. (2009). Concentration Distributions of Intermediate Hydrocarbons and Soot in Propane/Air Triple Flames, Journal of the Energy Institute, 82(4), 185-196.
  7. Sahoo, P., Barman, T. K., & Routara, B. C. (2008). Fractal dimension modelling of surface profile and optimisation in CNC end milling using Response Surface Method. International Journal of Manufacturing Research, 3(3). https://doi.org/10.1504/IJMR.2008.019216
  8. “Effect of milling time on rheology of highly loaded aqueous fused silica slurry,” Journal of the American Ceramic Society. 91 [2]640-643 (2008). K. Mohanta and P. Bhargava.
  9. “Rheological behavior of concentrated fused silica suspensions in presence of egg white”, Advances in Applied Ceramics. (Transactions of the British Ceramic Society), 105 [5] 217- 221 (2006). K. Mohanta and P. Bhargava.
  10. “Particle packing and dispersion in green compacts prepared from co-dispersed silica-alumina binary slurries”, Am. Ceram. Soc. Bull., 84 [11] 9301-9305 (2005). K.Mohanta and P. Bhargava.
  11. “Comparison of two different commercially available polyacrylate dispersants for gelcasting alumina slurries”, Transactions of the Indian Ceramic Society, 64 [1] January-March 21-24 (2005). K. Mohanta and P. Bhargava.